Import Aluminum Coils — Buy in Bulk from Supplier in China

Lanren Aluminium Group supplies aluminum coils across nine distinct product lines from Chongqing, China, spanning alloy series 1*, 3*, 5*, and 8* with tempers from soft O to full-hard H19. Their hot rolled coil programme covers thicknesses from 2.5 mm to 7.0 mm and widths from 900 mm to 1700 mm per GB/T16501, while micron foil stock in alloy 1235 runs 0.25 mm to 0.50 mm thick and 900 mm to 1500 mm wide under EL/X79 and EL/X24. Coating sheet, curtain coil, lithographic coil, can stock, ceiling stock, bottle lids stock, and coil for aluminum-composite pipe each carry their own alloy, temper, dimensional, and standard specifications, giving buyers precise technical paths for each application.

The material basis is wrought aluminum in various strain-hardened and annealed conditions. Hot rolled coil in O, F, and H112 tempers suits deep drawing and general fabrication. Coating sheet tempers H14 through H26 enable painted architectural and appliance panels. Curtain coil in H12, H22, H24, H26, and H32 tempers serves facade and interior systems. Lithographic coil in 1050-H18 at 0.23-0.28 mm targets printing plate substrate. Can stock in 3104-H19 at 0.28-0.31 mm is drawn and ironed for beverage containers. Ceiling stock, bottle lids stock in 8011-H16/H18, and composite-pipe coil in O and H22 complete the range. Typical industry practice for 3xxx and 5xxx series coil involves controlled inter-annealing to stabilise mechanical properties and earing behaviour.

Buyers span construction curtain-wall fabricators, lithographic plate makers, can-making lines, ceiling tile producers, bottle cap stampers, and HVAC pipe manufacturers. The 0.20 mm minimum thickness on bottle lids stock and 0.18 mm on coating sheet indicate cold-rolling capability down to foil-gauge territory. Composite-pipe coil widths from 30 mm upward suggest slitting and edge-conditioning services. All specifications reference Chinese national or enterprise standards rather than EN or ASTM, so importers should confirm equivalence testing for their destination markets. Response rate and average response time are not available, so direct technical enquiry to the Chongqing address is advisable.

Lanren Aluminium Group is located at Apev Nanan District, Chongqing 400060, China. The supplier is listed under an imported tier with a harbor trust tier, and both response rate and average response hours show as 0.00, indicating no response data is currently available through the platform profile. No information on year of establishment, employee count, annual turnover, or named clients is present in the source data, so none can be stated.

The listing focuses entirely on technical product lines rather than corporate narrative. Nine coil categories are catalogued with explicit alloy, temper, dimensional, and standard references, suggesting a mill or large-scale distributor with rolling and finishing capability. Chongqing's inland location implies rail or riverine logistics to coastal ports for export. Buyers should treat response verification as a critical first step and request mill test certificates and standard equivalency documentation before proceeding.