Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Kaf Grup Healthcare manufactures a fully ultrasonic-sealed 3 ply disposable face mask using non-woven polypropylene in a spunbond-meltblown-spunbond configuration. The full ultrasonic construction replaces stitched seams with high-frequency welded bonds, eliminating needle perforations that could compromise barrier integrity. The masks incorporate adjustable ear loops and a soft inner layer intended to reduce irritation during prolonged wear. The supplier operates from Kucukcekmece, Atakent Mah., 221 Sok. No 3A, Rotaoffice A Blok, Istanbul, Turkey.
The full ultrasonic sealing process applies 20-40 kHz vibration to thermally bond polypropylene layers at the edges and attachment points without thread or glue. This method produces consistent seal strength and reduces particle penetration at the periphery compared to conventional stitched masks. The three-layer filtration follows standard SMS architecture: outer spunbond for moisture repellence, middle meltblown for mechanical and electrostatic capture, inner spunbond for skin contact comfort. Typical weight ranges for this construction grade are 25-35 gsm outer, 25-30 gsm meltblown, and 25-35 gsm inner layers.
Primary applications span hospital wards, outpatient clinics, diagnostic laboratories, pharmaceutical manufacturing clean areas, and general workplace protection. The lightweight, breathable design targets healthcare professionals, essential service workers, and organisations maintaining respiratory hygiene protocols. Buyers should confirm whether the product is positioned at medical device grade or general protective use grade, as this determines applicable conformity assessment requirements for import into regulated markets.
| Material Construction | Non-woven PP Spunbond + Meltblown + Spunbond (SMS, typical 3-ply medical mask architecture) |
| Sealing Method | Full ultrasonic welding (20-40 kHz, typical frequency range for polypropylene bonding) |
| Layer Configuration | 3-ply with middle meltblown filtration layer |
| Ear Loop Design | Adjustable elastic ear loops (attachment by ultrasonic welding, confirm with supplier) |
| Typical Outer/Inner Spunbond Weight | 25-35 gsm (standard industry range for reinforced ultrasonic-sealed masks) |
| Typical Meltblown Layer Weight | 25-30 gsm (standard range for enhanced filtration ultrasonic masks) |
| Breathability Target | Differential pressure <40 Pa/cm² typical for medical-grade masks (confirm test value with supplier) |
| Intended Use Classification | Medical, clinical, and general protective use (confirm CE marking class and notified body with supplier) |
| Available Incoterms | FOB, CIF (per listing; other terms to be negotiated) |
| Packaging | Bulk carton for B2B export (inner quantities and palletisation to be confirmed) |
Kaf Grup Healthcare is located at Kucukcekmece, Atakent Mah., 221 Sok. No 3A, Rotaoffice A Blok 8283, Istanbul, 34307, Turkey. The supplier holds a harbor trust tier. The response rate is recorded at 0.00% with zero average response hours, indicating no platform-mediated response history. Buyers should establish direct communication channels to evaluate responsiveness and account management capability before relying on this supplier for time-sensitive procurement.
The listing positions Kaf Grup Healthcare as a manufacturer of ultrasonic-sealed 3 ply face masks for medical and general protective markets. No manufacturing facility details, quality system certifications, production capacity figures, or client references are provided in the source data. The company name suggests healthcare sector specialisation, but buyers should request Turkish Chamber of Industry registration, tax identification, and any ISO 13485 or CE marking documentation to substantiate medical device manufacturing claims.
This 3 Ply Face Mask Full Ultrasonic is a disposable protective face covering engineered with three filtration layers of non woven polypropylene for reliable particle and droplet barrier performance. The full ultrasonic sealing construction ensures strong edge bonding without stitching, making it suitable for medical, clinical, and general public use in hospitals, clinics, laboratories, and daily protection scenarios. Widely sourced from major manufacturing hubs, these masks are a high-demand import/export item in the global PPE trade market, traded in bulk cartons with competitive pricing for B2B procurement at scale.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | Contact Supplier |
| Response Rate | New Supplier |
Before contracting Kaf Grup Healthcare, buyers should verify the supplier's manufacturing location, whether production occurs in Turkey or through subcontracted facilities elsewhere, and confirm that the Istanbul address represents manufacturing or trading operations. Request current ISO 13485 certification, CE marking certificates with notified body identification, and recent batch test reports. Evaluate sample masks for ultrasonic weld uniformity by inspecting edge bonds under magnification, checking for cold welds or incomplete fusion that could create failure points during wear. Confirm nose wire mouldability and whether the wire is fully encapsulated to prevent sharp ends.
Shipping from Istanbul typically utilises air freight through Istanbul Airport (IST) or sea freight through Ambarli Port. Clarify whether FOB terms refer to Istanbul port or another designated handover point, and whether CIF includes marine insurance and destination port charges. For EU-bound shipments, verify that the supplier is registered in EUDAMED and can provide EU Declaration of Conformity. Payment structures for Turkish suppliers often include 30% advance with 70% against shipping documents, though documentary letters of credit may be negotiated for larger volumes. Confirm the supplier's acceptance of payment in EUR, USD, or TRY.
Upon arrival, conduct dimensional verification against the specification sheet, measure nose wire length and position, and perform seal integrity testing on a representative sample. If the intended use is clinical, verify that the CE marking is valid and linked to an active notified body designation. Check labelling compliance with destination market requirements, including language, manufacturer identification, and lot numbering for traceability. Retain samples from each shipment batch for potential retesting and maintain documentation for regulatory inspection. For healthcare facility supply, ensure the supplier can provide sterile or non-sterile certification as required by the end user's infection control protocol.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing 3 Ply Face Mask Full Ultrasonic for your business, securing the right balance of quality and cost is essential. Kaf Grup Healthcare, a verified supplier based in Turkey, offers this product with key specifications including 3 Ply Disposable Face Mask, Full Ultrasonic Sealed, Outer Spunbond + Middle Meltblown (BFE/PFE Filter) + Inner Spunbond, and 17.5 cm x 9.5 cm (Standard Adult) / 14.5 cm x 9 cm (Child). By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $14/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is actively traded under HS Code 6307.90, making it a staple in the 3 Ply Face Mask sector with strong demand from importing countries worldwide.
Importing 3 Ply Face Mask Full Ultr requires careful attention to shipping logistics, customs compliance, and secure payment terms. Kaf Grup Healthcare offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 6307.90 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this 3 Ply Face Mask Full Ultr has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the 3 Ply Face Mask category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing 3 Ply Face Mask Full Ultr requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 6307.90 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for 3 Ply Face Mask Full Ultrasonic from Kaf Grup Healthcare is $14/Bags on FOB terms from Turkey. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Kaf Grup Healthcare through EximNext.
The supplier, Kaf Grup Healthcare, has set a Minimum Order Quantity (MOQ) of 1 Bags for 3 Ply Face Mask Full Ultr. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, 3 Ply Face Mask Full Ultrasonic is classified under HS Code 6307.90. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import 3 Ply Face Mask Full Ultr from Turkey, negotiate shipping terms (FOB, CIF, or EXW) directly with Kaf Grup Healthcare. Ensure you have the necessary import licenses for 3 Ply Face Mask products in your destination country.
Yes, Kaf Grup Healthcare is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for 3 Ply Face Mask Full Ultrasonic supplied by Kaf Grup Healthcare include 3 Ply Disposable Face Mask, Full Ultrasonic Sealed, Outer Spunbond + Middle Meltblown (BFE/PFE Filter) + Inner Spunbond, and 17.5 cm x 9.5 cm (Standard Adult) / 14.5 cm x 9 cm (Child). For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Kaf Grup Healthcare offers 3 Ply Face Mask Full Ultr with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
3 Ply Face Mask Full Ultr is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Kaf Grup Healthcare through our platform.
Kaf Grup Healthcare maintains international quality certifications. These ensure that the 3 Ply Face Mask Full Ultr meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Kaf Grup Healthcare will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Kaf Grup Healthcare.
Discover more products in 3 Ply Face Mask from verified suppliers worldwide.