Import Electric Stacker — Buy in Bulk from Supplier in China

Smooth travel and lift combine excellent controls to reduces product damages and increases productivity. Lift limit switch operates at maximum lift height to shut off pump motor. A heavy-duty 24-volt electrical system provides good travel and lift speeds. High quality hydraulic pump assures very little noise, maximum efficiency and durability. Drive units is equipped with an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonomically designed with a raise, lower and horn button. Speed automatically reduces when driving with the forks at a height of 12" or higher. Small turn radius makes it suitable for narrow passage ways. The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life. Foot pedal reduces fatigue. Built-in charger. Technical data Residual Capacity at different lifting height. 1KG=2.2LB 1INCH=25.4MM Up to h3 mm ACTUAL CAPACITY (Q) kg 2500, 1500, 1000 2900, 1000, 700 3400, 800, 500 Load center distance (C)mm 600, 700 With CURTIS electric control from Germany Equipped with METRLROTA driving wheel and HPI pump unit from Europe. Heavy duty design with top quality mast construction of HOSCH steel from Germany. Identification 1.2 Manufacturer's type designation FL1529 FL1534 1.3 Drive:electric(battery or mains), diesel, petrol, fuel gas, manual electric 1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker Pedestrian 1.5 Load Capacity /rated load Q (t) 1.5 1.6 Load center distance C mm 600 1.8 Load distance, center of drive axle to fork X mm 677 1.9 Wheelbase y mm 1183 1168 Weights 2.1 service Weight Kg 1020 1120 2.2 Axle loading, laden front/rear Kg 1195/1325 1245/1375 2.3 Axle loadings, unladen front/rear Kg 755/265 826/295 Wheels Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane 3.2 Tyre size, front 250x78 3.3 Tyre size, rear 80x70 1) 3.4 Additional wheels(dimensions) 150x54 3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4 3.6 Track width,front b10(mm) 685 3.7 Track width,rear b11(mm) 390/515 Basic Dimensions 4.2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465 Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.4 5.2 Lift speed, laden/unladen mm/s 105/170 5.3 Lowering speed, laden/unladen mm/s 100/95 5.8 Max.gradient performance, laden/unladen % 6/12 5.10 Service brake Electromagnetic E-Motor 6.1 Drive motor rating s2 60min kw 1.2 6.2 Lift motor rating at s3 15% kw 3.0 6.3 Battery acc. To DIN, no 3PZS 6.4 Battery voltage, norminal capacity V/Ah 24/210 Others 8.1 Type of drive control MOSFET Control 8.4 Sound level at driver's ear acc.to EN12053 dB(A) 67 1)Single wheel 80x93 .2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465.