About Zhengzhou Eming Aluminum Co., Ltd. - Aluminum Foils Supplier in China

China hosts Zhengzhou Eming Aluminum Co., Ltd., which currently lists six aluminium products in its catalogue. The items span the aluminium foil and aluminium pan families and are identified under HS code families 7607, 7612 and 7615. The heavy‑duty food‑wrapper foil is classified under HS 7607.11 and is made from a food‑grade aluminium alloy (8011/1235, approximately 99 % Al). Standard baking foil rolls of 5 m, 10 m and 30 m length also fall under HS 7607.11 and use alloy 8011. A full‑size disposable take‑away pan (HS 7615.10) and a reusable 7‑inch round pan (HS 7615.10) are produced from food‑grade alloys (3003/8011 series). Round aluminium foil containers are listed under HS 7612.10 with alloy 8011, while a general food aluminium foil roll is catalogued under HS 7607.12 and contains 98‑99 % aluminium with 1‑2 % Fe+Si.

Product Range and Specialties of Zhengzhou Eming Aluminum Co., Ltd.

The catalogue covers aluminium foil products that typically range from 0.02 mm to 0.05 mm thickness for food‑wrapping applications and up to 0.10 mm for reusable pans. Industry standards such as ASTM B209 (aluminium sheet) and ASTM B221 (extruded aluminium) define tensile strength requirements of 100‑150 MPa for alloy 8011 and 150‑200 MPa for alloy 3003. Food‑contact foils are commonly required to meet FDA 21 CFR 174‑179 and EU Regulation 1935/2004, with migration limits verified by laboratory testing. Buyers often request coated or printed variants, but the current listings are uncoated, plain foils suitable for direct food contact.

Trade and Export Information - Zhengzhou Eming Aluminum Co., Ltd.

China is a leading exporter of aluminium foil and related packaging, with shipments frequently destined for Southeast Asia, the Middle East, Europe and North America. The HS 7607 series (foil) and 7612/7615 series (containers and pans) are subject to routine customs inspection and may be accompanied by a Certificate of Origin and a product compliance declaration. Common buyer‑required certifications include FDA food‑contact approval, EU food‑contact compliance, and ISO 9001 quality‑management certification; exporters often provide SGS or BVQI inspection reports. Typical logistics involve 20‑ft or 40‑ft containers packed with cardboard cores for rolls and corrugated cartons for pans, using FOB or CIF Incoterms.

Sourcing from Zhengzhou Eming Aluminum Co., Ltd. - Buyer Guidance

When sourcing aluminium foil from this supplier, request an aluminium alloy certificate confirming the exact 8011 or 3003 composition and a recent tensile test report per ASTM B209 or B221. Verify foil thickness tolerance (usually ±5 %) and ask for a food‑contact migration test report to ensure compliance with FDA and EU regulations. Obtain a sample roll (e.g., 1 m) and a sample pan to inspect surface finish, edge quality and dimensional accuracy before confirming a bulk order. Confirm that packaging meets ISO 11607 if the product will be used in regulated environments, and ask for an inspection certificate from a recognized third‑party laboratory.

What HS codes are used for the aluminium foil products listed?

The heavy‑duty food‑wrapper foil, the standard baking rolls and the general food foil roll are classified under HS 7607.11 or HS 7607.12, while the round containers use HS 7612.10 and the disposable and reusable pans use HS 7615.10.

Which aluminium alloys are used for the foil and pan items?

Foil products are made from aluminium alloy 8011 (or the 8011/1235 blend) with about 99 % aluminium. The reusable 7‑inch pan uses a 3003/8011 series alloy, and the disposable pan is produced from a generic food‑grade aluminium alloy.

What typical thicknesses should a buyer expect for the food‑wrapping foils?

Standard food‑wrapping foils are usually supplied in the range of 0.02 mm to 0.05 mm thickness, with tolerance typically ±5 % of the nominal value.

Which certifications are normally required for food‑contact aluminium foil?

Buyers normally request FDA food‑contact approval, EU Regulation 1935/2004 compliance, and a material test report (ASTM B209) confirming alloy composition and migration limits.

How are the foil rolls and pans packaged for export?

Foil rolls are wound on cardboard cores and placed in double‑wall corrugated boxes; pans are stacked in cardboard cartons with protective separators. Both are loaded into 20‑ft or 40‑ft containers according to standard container loading calculations.

What documents should a buyer ask for before placing a bulk order?

A buyer should ask for a Certificate of Origin, an aluminium alloy certificate, recent tensile and thickness test reports, food‑contact compliance certificates, and a third‑party inspection report (e.g., SGS).

What are typical lead times and minimum order quantities for these aluminium products?

Lead times for foil rolls and pans are usually 20‑35 days after order confirmation, with minimum order quantities ranging from 5 metric tons for foil rolls to 2 metric tons for pans, depending on the specific product.