About Yantai Takon Plastic Packaging Co., Ltd. - PP (Polypropylene) Woven Bag Supplier in China

China‑based Yantai Takon Plastic Packaging Co., Ltd., located in the port city of Yantai, lists eight active products in its catalogue. The portfolio covers Low Melt Point EVA Batch Inclusion Bags, Kraft Paper Valve Bags, several variants of PP woven bags with BOPP film or lamination, a PE isolating fresh‑keeping film, and related packaging laminates. Each product falls under the broader categories of polypropylene woven bags, general packaging items, and laminate films, reflecting the supplier’s focus on bulk flexible packaging solutions. The catalogue does not provide HS codes, but the product types correspond to standard customs tariff headings for plastic bags and films.

The supplier’s eight items represent typical commodity grades used in agricultural, food‑processing, and industrial sectors. Polypropylene woven bags are commonly classified under HS chapter 39, sub‑heading 3923, while EVA inclusion bags and PE fresh‑keeping films map to HS 3920‑3921 families. Buyers can expect material specifications such as melt flow index for PP (typically 2‑8 g/10 min) and film thicknesses ranging from 12 µm for BOPP lamination to 30 µm for PE isolating film. The product list reflects standard industry practices for bulk bag construction, including reinforced handles and top spouts for large‑capacity transport.

Product Range and Specialties of Yantai Takon Plastic Packaging Co., Ltd.

The catalogue lists four polypropylene woven bag formats: a standard PP woven bag, a PP woven bag with BOPP film and handle, a big bag with top spout, and a PP woven bag with BOPP lamination. In addition, the supplier offers Low Melt Point EVA bags (both batch inclusion and standard), a Kraft paper valve bag, and a PE isolating fresh‑keeping film. In the plastics packaging sector, PP woven bags are typically produced in weights of 500‑1500 g/m² and tensile strengths of 15‑30 MPa, while BOPP lamination adds a barrier layer of 12‑25 µm and a gloss finish. EVA inclusion bags are usually formulated to melt between 80 °C and 120 °C, allowing easy heat‑sealing of bulk powders or granules. PE fresh‑keeping films are often low‑density polyethylene (LDPE) with moisture vapor transmission rates below 150 g/m²·24 h, used for perishable goods.

Trade and Export Information - Yantai Takon Plastic Packaging Co., Ltd.

China remains one of the world’s largest exporters of flexible plastic packaging, with shipments of PP woven bags and laminates directed to Southeast Asian agricultural markets, European chemical distributors, and North American food‑processing firms. HS chapter 39 codes for these products typically trigger inspection regimes such as the EU’s REACH compliance check or the US FDA’s food‑contact material review when the end use involves food. Common buyer requirements include ISO 9001 quality‑management certification, and for food‑contact films, compliance with FDA 21 CFR 175.105 or EU Regulation 1935/2004. Export logistics from Yantai often employ 20‑foot or 40‑foot containers stacked on Euro pallets, with standard INCOTERMS of FOB Yantai Port or CIF destination.

Sourcing from Yantai Takon Plastic Packaging Co., Ltd. - Buyer Guidance

When sourcing from Yantai Takon, buyers should request material safety data sheets (MSDS), melt flow index reports for PP, and tensile strength test results for woven fabrics. Sample bags or film strips should be examined for seam strength, handle attachment integrity, and lamination adhesion before confirming bulk orders. Verify that the supplier can provide certificates of compliance such as ISO 9001, and, for food‑related films, FDA or EU food‑contact approvals. Typical minimum order quantities range from one 20‑ft container (≈1,200 kg of PP woven bags) to larger volumes for laminated films, with lead times of 30‑45 days after sample approval.

What types of polypropylene woven bags does Yantai Takon produce?

The supplier lists standard PP woven bags, PP woven bags with BOPP film and handles, big PP woven bags with top spouts, and PP woven bags with BOPP lamination. All are designed for bulk transport of powders, granules, or agricultural products.

Are the EVA inclusion bags suitable for heat‑sealing?

Yes. The Low Melt Point EVA Batch Inclusion Bags and the standard Low Melt EVA Bags are formulated to melt between 80 °C and 120 °C, which is typical for heat‑seal applications in bulk handling.

What is the material of the fresh‑keeping film?

The product is described as PE isolating fresh‑keeping film, which is generally low‑density polyethylene (LDPE) with moisture barrier properties used for perishable goods.

Which HS codes are relevant for these products?

Polypropylene woven bags fall under HS 3923, EVA bags under HS 3920, and polyethylene films under HS 3921. These codes are used for customs classification of flexible plastic packaging.

What certifications should a buyer request?

Buyers should ask for ISO 9001 quality‑management certification and, where the end‑use involves food contact, request FDA or EU food‑contact compliance certificates.

What are typical packaging and shipping methods?

Products are usually packed in bulk on Euro pallets, with 20‑ft or 40‑ft containers used for sea freight. Standard INCOTERMS include FOB Yantai Port or CIF to the buyer’s destination port.

What sample or testing information is advisable before ordering?

Request a material safety data sheet, melt flow index for PP, tensile strength data for woven fabrics, and lamination adhesion test results. Physical samples of bags or film strips allow verification of seam strength and handling performance.

What are the usual lead times and order sizes?

Lead times are typically 30‑45 days after sample approval. Minimum orders often start at one 20‑ft container, roughly 1,200 kg of PP woven bags, with larger quantities negotiated for laminated films.