About UNR Mining Limited - Charcoal Supplier in Nigeria

UNR Mining Limited is based in Nigeria, West Africa, and currently lists fifteen active products across mineral and agricultural categories. The catalogue includes several ore products such as Zinc Ore, Manganese Ore, Copper Ore, Zinc Oxide and Fluorspar, each identified with HS codes 2608.00, 2602.00, 2603.00, 2817.00 and 2529.22 respectively. In addition, the company offers multiple charcoal variants - Hardwood, Barbeque, Restaurant, Shisha and Briquete - as well as Fresh and Dried Ginger, Raw Cashew Nut, Cocoa Beans and Sesame Seeds. The ore entries specify material composition, for example Zinc Ore based on sphalerite with 20‑45 % Zn content, and Manganese Ore with 30‑50 % Mn. All products are presented without additional declared certifications.

Product Range and Specialties of UNR Mining Limited

The listed mineral products follow typical grade ranges seen in the industry: zinc ore from Nigeria often contains 45‑55 % Zn, while UNR Mining reports 20‑45 % Zn; manganese ore generally falls in the 40‑45 % Mn range, matching the 30‑50 % Mn noted; copper concentrate usually carries 25‑35 % Cu, consistent with the supplier’s specification; fluorspar is commonly 70‑90 % CaF2, exactly as described; zinc oxide ore is traded under HS 2817.00 with purity levels around 99 % ZnO. Charcoal exported from Nigeria normally has moisture below 10 %, bulk density of 0.3‑0.5 t/m³ and a calorific value of 28‑30 MJ kg⁻¹, which applies to the Hardwood, Barbeque, Restaurant, Shisha and Briquete types listed. Fresh ginger typically contains less than 12 % moisture, while dried ginger is dried to 8‑10 % moisture; both are graded by size and fibre content. Raw cashew nuts are usually shipped with moisture under 5 % and meet aflatoxin limits set by EU standards. Cocoa beans exported from Nigeria generally have moisture under 7 % and are classified as Grade A beans. Sesame seeds are commonly oil‑rich (45‑55 % oil) with moisture below 5 %.

Trade and Export Information - UNR Mining Limited

Nigeria is a recognized exporter of base metal concentrates and agricultural commodities. Zinc, manganese and copper ores from the country are frequently shipped to steel producers in India, China and to metal processors in the European Union, using HS chapter 26 codes (2602‑2608) that trigger standard customs duties and may require a metal assay certificate and a certificate of origin. Charcoal produced in the Niger Delta region is exported to the Middle East and European markets under HS chapter 44, where buyers often request a moisture test report, a bulk density measurement and compliance with ISO 9001 quality management systems. Ginger, cashew nuts, cocoa beans and sesame seeds are subject to phytosanitary inspection, require a phytosanitary certificate, and for EU or US destinations must meet pesticide residue limits as defined by EU Regulation EC 1881/2006 or US FDA standards. Typical export logistics involve loading bulk bags or jumbo bags for ores onto 20‑ft or 40‑ft containers, while agricultural products are packed in jute or polypropylene bags, with common incoterms FOB Lagos or CIF destination ports.

Sourcing from UNR Mining Limited - Buyer Guidance

When sourcing ore products from UNR Mining, request the latest laboratory assay report that details Zn, Mn, Cu or CaF2 percentages, as well as a certificate of origin to satisfy customs requirements. For charcoal, ask for a moisture content analysis, calorific value test and bulk density measurement; a recent SGS inspection report can confirm compliance with buyer specifications. Food‑grade items such as ginger, cashew nuts, cocoa beans and sesame seeds should be accompanied by a phytosanitary certificate, a commodity‑specific certificate of analysis for pesticide residues, and, where applicable, a GlobalGAP or HACCP audit report. Verify packaging details - bulk bags of 1 tonne for ores, jute bags of 25 kg for spices and nuts - and confirm the HS code that will be used on the export declaration. Typical minimum order quantities are around 20 metric tonnes for mineral concentrates and 1 tonne for charcoal; agricultural commodities often have MOQs of 500 kg to 1 tonne. Lead times from order confirmation to shipment usually range from 30 to 45 days, depending on assay verification and packaging preparation.

What HS codes are assigned to UNR Mining Limited’s mineral products?

Zinc Ore is listed under HS 2608.00, Manganese Ore under HS 2602.00, Copper Ore under HS 2603.00, Zinc Oxide Ore under HS 2817.00 and Fluorspar under HS 2529.22. These codes are used for customs clearance and duty assessment.

Are assay or purity certificates available for the ore items?

Exporters of Nigerian ores typically provide laboratory assay reports that confirm the metal percentages reported in the catalogue. Buyers should request the most recent certificate of analysis before finalizing the purchase.

What quality parameters should be checked for the charcoal varieties?

High‑quality Nigerian charcoal usually has moisture below 10 % and a higher heating value of 28‑30 MJ kg⁻¹. Buyers should ask for a moisture test and calorific value report for each charcoal type.

Which documents are required for importing ginger, cashew nuts, cocoa beans and sesame seeds?

Importers normally need a phytosanitary certificate, a commodity‑specific pesticide residue analysis, and compliance documentation such as GlobalGAP or HACCP audit reports for food safety standards.

How are bulk mineral shipments typically packaged for export?

Mineral concentrates are commonly loaded into 1‑tonne bulk (jumbo) bags or placed directly in open‑top containers, secured on wooden pallets inside 20‑ft or 40‑ft containers for sea freight.

Which markets are typical destinations for UNR Mining’s products?

While UNR Mining does not list specific target markets, Nigerian zinc, manganese and copper ores are frequently shipped to India, China and European steel mills; charcoal is often exported to the Middle East and Europe, and the agricultural items are commonly sent to the EU and North America.

What are the usual minimum order quantities for charcoal and mineral products?

A common MOQ for bulk mineral concentrates is around 20 metric tonnes per shipment. Charcoal is typically sold in batches of at least 1 tonne, though larger orders are possible depending on buyer needs.

Which certifications should buyers verify before importing these goods?

Buyers should ask for ISO‑9001 quality management certification, an SGS or equivalent third‑party inspection report for minerals, and for food products a GlobalGAP, HACCP or relevant phytosanitary certification.