About Tex America's LLC - Magnets & Magnetic Products Supplier in United States

Tex America's LLC is based in the United States and currently lists five active products across its catalogue. The supplier’s top categories include Magnets & Magnetic Products, Medical Equipment & Machinery, Orthopedic Equipments & Implants, Light & Medium Machinery, and Medical Thermometers, indicating a focus on both industrial hardware and specialized medical devices. Within the magnet segment the catalogue references permanent magnet products that fall under HS chapter 85, specifically codes 8505.11 for neodymium‑based magnets and 8505.19 for ferrite magnets. The remaining product, a Wire Stripping Machine, is listed without an HS code but belongs to the light‑medium machinery segment and is commonly classified under HS 8466 for machine tools.

The product list comprises a Wire Stripping Machine, a Bucky Ball Sphere, disc‑shaped and rectangle‑shaped neodymium magnets, and ferrite magnets. All three neodymium items share HS code 8505.11 and are described as NdFeB Grade N35 with a nickel‑copper‑nickel plating, a standard finish for corrosion resistance. The ferrite magnets carry HS code 8505.19 and are made from iron oxide combined with barium carbonate or strontium carbonate, typical of ceramic magnet compositions. No additional HS codes are provided for the stripping machine, which is usually classified under HS 8466.92 for wire processing equipment.

Product Range and Specialties of Tex America's LLC

The catalogue’s magnetic offerings include a spherical Bucky Ball, disc‑shaped and rectangle‑shaped neodymium magnets, all specified as NdFeB Grade N35. In the permanent‑magnet market, N35 is a common entry grade offering a maximum energy product (BHmax) around 35 MGOe, suitable for general industrial applications such as sensors, actuators, and small motors. Buyers also encounter higher grades like N42 or N52, which provide greater magnetic flux density and temperature tolerance, but the listed N35 meets many standard requirements. Ferrite magnets in the list are ceramic, typically characterized by lower magnetic strength (BHmax 3 - 4 MGOe) but high corrosion resistance and cost efficiency, making them popular in automotive and consumer electronics housings. The Wire Stripping Machine is a light‑medium machinery item used to remove insulation from copper or aluminum conductors; typical specifications include stripping speed of 0.5 - 2 m/min, capability for wire gauges from 12 AWG to 30 AWG, and power ratings between 110 V and 240 V. Buyers often compare such machines on stripping accuracy, cycle time, and compliance with IEC 60204 safety standards.

Trade and Export Information - Tex America's LLC

United States manufacturers of permanent magnets frequently ship to Europe, Southeast Asia, and North America, where demand for electric‑vehicle motors, renewable‑energy generators, and consumer electronics drives imports. HS code 8505.11 covers neodymium‑iron‑boron magnets and is subject to anti‑dumping investigations in the EU, so importers commonly require a Certificate of Origin and a compliance declaration for REACH and RoHS. Ferrite magnets under HS 8505.19 are less regulated but still need material safety data sheets (MSDS) for the barium or strontium compounds used in the composition. Standard export packaging includes wooden crates or bulk pallets with 20‑ft or 40‑ft containers, each crate typically protected with moisture‑resistant liners to preserve magnetic performance. Common Incoterms for U.S. magnet exporters are FOB US West Coast ports or CIF to major Asian hubs, with freight forwarders handling customs clearance under the relevant HS codes.

Sourcing from Tex America's LLC - Buyer Guidance

When sourcing the listed neodymium magnets, buyers should request a material test report that confirms the NdFeB composition, grade (N35), and magnetic properties such as residual flux density (Br) and coercivity (Hc). A coating inspection report confirming the nickel‑copper‑nickel layer thickness (usually 5 - 10 µm) helps assess corrosion protection. For the ferrite magnets, an MSDS and a certification of compliance with IEC 60404‑2 for magnetic safety are typical prerequisites. Prospective purchasers of the Wire Stripping Machine should verify the machine’s voltage rating, stripping speed range, and compliance with IEC 60204‑1 for electrical safety; a UL or CE test certificate is often requested before finalising a contract. In all cases, confirming the HS code declaration, country of origin label, and any required export licenses from the United States is essential to avoid customs delays.

What magnetic grades are available in Tex America's catalogue?

The catalogue lists neodymium‑iron‑boron magnets graded N35 and ferrite (ceramic) magnets, which are standard grades for general industrial use.

Which HS codes apply to the listed magnets?

Neodymium disc, rectangle and Bucky Ball magnets use HS code 8505.11, while the ferrite magnets are classified under HS code 8505.19.

What material specifications should a buyer verify for the neodymium magnets?

Buyers should verify the NdFeB composition, Grade N35, magnetic performance values (Br and Hc), and the nickel‑copper‑nickel plating thickness.

Is a sample or test report available for the Wire Stripping Machine?

Suppliers typically provide a functional sample or a detailed test report covering stripping speed, wire gauge range, power consumption, and IEC 60204 safety compliance.

What certifications are commonly required for importing these magnets?

Importers usually request a Certificate of Origin, REACH and RoHS compliance statements, and for neodymium magnets, a material test report; ferrite magnets often need an MSDS.

What are typical packaging and shipping methods for these products?

Magnets are usually packed in moisture‑resistant wooden crates or bulk pallets, secured in 20‑ft or 40‑ft containers; the stripping machine is shipped on a pallet with edge protection, often under FOB or CIF terms.

What is the usual minimum order quantity (MOQ) for the magnets?

MOQs vary by size and shape; for standard disc or rectangle neodymium magnets, suppliers often set an MOQ of 500 units per size, while ferrite magnets may be ordered in bulk by kilogram.

What lead time can a buyer expect for the Wire Stripping Machine?

Lead times for the stripping machine typically range from 4 to 6 weeks after order confirmation, depending on configuration and any required safety certifications.