About Jade Trading Oy - Industrial Pumps Supplier in Finland

Finland‑based Jade Trading Oy lists 28 active products in its catalogue. The offering spans industrial pumps, food processing machinery, heavy machinery, breweries & distillery machinery, packaging machinery, compressors, used machineries & equipments, and light & medium machinery. Products include a CO2 recovery plant rated at 1000 kg/h, a liquid‑ring vacuum pump, the SAB 128 HF cooling screw compressor, and a vacuum compressor model delivering 38 m³/min. Additional items such as overhead cranes, screw compressors, a KHS bottling line, and a wind turbine are also listed. The inventory reflects the Finnish emphasis on robust, energy‑efficient engineering solutions.

The only product with a disclosed HS classification is the plasma surface pre‑treatment and cleaning unit, recorded under HS 8456.10 and built from stainless steel, aluminium and engineered polymer components. Other catalogue entries include a KHS bottling line with a capacity of 20 000 bph, a GEA Westfalia beer separator, and a stainless‑steel tank of 3.5 m³ volume. Equipment such as the convection oven TRIAB, heat exchangers, and a horizontal thermoformer (SS Tiromat Powerpak 660) are also offered. The mix of new and used machinery spans capacities from small 38 m³/min vacuum compressors to large‑scale steam boilers. This product set aligns with typical export portfolios of Finnish industrial equipment providers.

Product Range and Specialties of Jade Trading Oy

The pump and compressor portfolio follows industry standards such as ISO 9001 quality management and CE marking for conformity with the EU Machinery Directive. Industrial centrifugal pumps are commonly supplied in stainless‑steel grades 304 or 316, with flow ratings from 10 m³/h up to 200 m³/h and pressure classes up to 10 bar. Screw compressors like the SAB 128 HF are typically rated for pressures of 7‑10 bar and flow rates of 15‑30 m³/min, with energy‑efficiency classes IE2‑IE3. Food‑processing machinery, including bottling lines, yogurt production lines and convection ovens, usually complies with EU food‑contact regulations (Regulation EC 1935/2004) and hygiene standards such as 3‑A sanitary design. Packaging machinery such as the wrap‑around packer Kisters 310 often operates at speeds of 300‑500 packs per minute and is designed for easy CIP (clean‑in‑place) procedures. Wind turbines and heavy equipment follow IEC 61400 standards for design and safety, with typical turbine capacities from 1 MW to 3 MW.

Vacuum equipment such as liquid‑ring vacuum pumps and vacuum compressors are generally built with cast iron or stainless‑steel casings, delivering vacuum levels down to 10 kPa and flow rates from 0.5 m³/min to 40 m³/min. Overhead cranes listed are typically rated for loads between 2 tonnes and 25 tonnes, conforming to EN 15011 safety standards. Heat exchangers and steam boilers are designed for pressures up to 16 bar and thermal efficiencies above 85 %. The plasma surface pre‑treatment unit (HS 8456.10) combines stainless steel, aluminium and engineered polymers to meet surface‑preparation requirements for metal parts, a configuration common in advanced coating lines. All these categories are supported by standard test reports such as performance curves, material certification sheets and CE Declarations of Conformity.

Trade and Export Information - Jade Trading Oy

Finland is a major exporter of high‑tech industrial machinery within the EU, and its equipment is routinely shipped to Western Europe, the Nordics, the Middle East and selected African markets. The catalogue items fall mainly under HS Chapter 84 (machinery and mechanical appliances) and Chapter 85 (electrical machinery), with the plasma surface treatment unit classified under HS 8456.10. Buyers typically request CE certification, ISO 9001 quality‑management certificates and, where applicable, ATEX certification for equipment used in explosive atmospheres. Standard export logistics involve containerisation in 20‑ft or 40‑ft containers, wooden pallets for larger units, and Incoterms such as CIF or DAP to European ports. Finnish exporters also provide material safety data sheets (MSDS) and conformity test reports to satisfy customs and regulatory inspections.

Typical importers of this equipment include beverage producers, food processors, metal‑coating plants and renewable‑energy developers. Regulatory checks focus on EU Machinery Directive compliance, REACH chemical safety for any lubricants, and, for pressure equipment, the Pressure Equipment Directive (PED). Export documentation commonly includes a commercial invoice, packing list, certificate of origin, CE Declaration of Conformity and, where required, a test report from an accredited laboratory. Finnish manufacturers benefit from a strong reputation for precision engineering, which assists in meeting the stringent quality expectations of buyers in the EU and GCC regions.

Sourcing from Jade Trading Oy - Buyer Guidance

When sourcing from Jade Trading Oy, buyers should request the latest CE Declaration of Conformity and any applicable ISO‑9001 or ISO‑14001 certificates to verify compliance with EU standards. Performance data such as flow curves for pumps, pressure‑temperature charts for boilers, and efficiency ratings for compressors should be examined before finalising an order. For food‑processing and packaging lines, buyers normally ask for hygienic design documentation, stainless‑steel grade specifications (e.g., 304 vs 316), and a sanitary design validation report.

Sample units or on‑site demonstrations are common practice for large‑scale equipment such as bottling lines or wind turbines; buyers should arrange for a pre‑shipment inspection by a third‑party surveyor. Verify that packaging meets ISPM 15 standards for wooden pallets and that the units are crated to withstand sea‑freight handling. Confirm lead times, which for new machinery can range from 8 weeks to 20 weeks depending on customization, and clarify the Incoterm to understand responsibility for freight, insurance and customs clearance.

What types of industrial pumps are listed in Jade Trading Oy’s catalogue?

The catalogue includes a liquid‑ring vacuum pump and a screw compressor package, both typical of the industrial pump segment. These units are generally supplied in stainless‑steel construction and rated for flow rates up to 200 m³/h with pressures up to 10 bar.

Does Jade Trading Oy provide certifications for its compressors?

The supplier does not list specific certifications in the facts, so buyers should request CE marking documents and any ISO‑9001 quality‑management certificates relevant to the compressor models. ATEX certification may be required for use in explosive atmospheres.

What is the capacity of the KHS bottling line offered?

The KHS bottling line is specified for a throughput of 20 000 bottles per hour. It is typically installed in beverage production facilities and complies with EU food‑contact regulations.

Is there information on the material of the plasma surface pre‑treatment unit?

Yes, the product is described as a multi‑material construction using stainless steel, aluminium and engineered polymer components, and it is classified under HS 8456.10.

What are the typical lead times for heavy machinery such as the overhead crane?

Lead times for heavy machinery from Finnish exporters usually range from 8 weeks to 12 weeks, depending on customization and availability. Buyers should confirm the exact schedule during the quotation stage.

Which packaging format is used for shipping the stainless‑steel tank?

Large steel tanks are normally shipped in wooden crates or on open‑deck containers, secured with straps and padded to prevent damage. The tank listed has a volume of 3.5 m³, which fits standard 40‑ft container dimensions when disassembled.

What documentation should a buyer request for the wind turbine?

Buyers should ask for the IEC 61400 compliance certificate, a CE Declaration of Conformity, and a performance test report showing rated power output and grid‑connection specifications. Shipping documents will include a commercial invoice, packing list and certificate of origin.