About Shenzhen Hoyatek Co., Ltd. - Laser Equipments & Products Supplier in China

Shenzhen Hoyatek Co., Ltd. is based in Shenzhen, China and lists seven active optical products. The catalogue focuses on laser equipment and light‑emitting diode (LED) sources that are commonly used in telecommunications, sensing and testing applications. Product titles include ASE C+L band 1550nm 17dBm Laser Optic, Ultra‑broadband Light Source, DFB Laser Source Tunable DWDM 100mW and several multi‑wavelength and SLED modules. In international trade these items fall under HS Chapter 85 which covers electrical machinery and equipment, and more specifically under sub‑headings for optical fibres, lasers and light sources. The supplier is classified as an imported tier with a harbor trust rating, indicating that transactions are typically mediated through established B2B platforms. No additional company size or financial data are disclosed in the source material.

Each listed item specifies a wavelength range or output power, for example the SLED Laser covers 650nm to 1650nm with a typical output of 20 mW. The DFB and tunable DWDM modules are described with power levels of 100 mW and are aimed at dense wavelength division multiplexing networks. The ultra‑broadband light source is positioned for broadband testing and calibration across the C‑band and L‑band. Industry practice requires compliance with IEC 60825‑1 laser safety classifications and, for telecom modules, adherence to ITU‑G.694 standards for channel spacing. Buyers usually request RoHS and CE conformity declarations for electronic components exported from China. The supplier’s catalogue does not list any proprietary certifications, so purchasers should verify compliance independently.

Product Range and Specialties of Shenzhen Hoyatek Co., Ltd.

The product portfolio consists of an ASE C+L band 1550 nm laser delivering 17 dBm output, an ultra‑broadband light source, two DFB laser sources labeled as tunable DWDM 100 mW, a SLED module spanning 650‑1650 nm at 20 mW, a generic tunable light source and a multi‑wavelength light source. In the laser market, C‑band (1530‑1565 nm) and L‑band (1565‑1625 nm) wavelengths are standard for long‑haul fiber optic transmission, while ASE sources provide amplified spontaneous emission for testing. Typical specifications for DFB lasers include wavelength stability within ±0.1 nm, side‑mode suppression ratio above 40 dB and output powers from 10 mW to 200 mW. SLEDs are valued for their broad spectral width (often 30‑50 nm) and low coherence, making them suitable for optical coherence tomography and broadband sensing. Buyers often look for compliance with IEC 60825‑1 safety classes (Class 1 or 2) and may request test reports covering spectral power distribution, polarization mode dispersion and temperature stability. The catalogue does not provide material composition, but laser diodes are typically based on InGaAsP or similar III‑V semiconductor alloys.

Trade and Export Information - Shenzhen Hoyatek Co., Ltd.

China ranks among the top exporters of optical components, with Shenzhen serving as a hub for high‑tech photonic manufacturing. Laser and LED modules from this region are commonly shipped to North America, Western Europe, Japan and South Korea for telecom infrastructure, medical imaging and industrial metrology. The relevant HS sub‑headings fall under 8541 (optical fibres, cables and accessories) and 8543 (electrical machines and apparatus having optical functions). Importers typically require CE marking for EU markets, FCC certification for the United States and RoHS compliance for hazardous substance restrictions. Standard logistics involve packing units in anti‑static bubble wrap, placing them in sealed cartons with moisture‑absorbing packs, and loading them in 20 ft or 40 ft containers under temperature‑controlled conditions when long transit times are expected. Incoterms such as FOB Shenzhen or CIF Europe are frequently used for these high‑value, low‑weight items.

Sourcing from Shenzhen Hoyatek Co., Ltd. - Buyer Guidance

Prospective buyers should request a full datasheet that lists wavelength accuracy, output power, polarization extinction ratio and safety class for each laser or LED module. Test reports complying with IEC 60825‑1 and ITU‑G.694, as well as RoHS and CE declarations, are standard documents to verify before placing an order. Because the supplier does not publish internal certifications, buyers are advised to ask for a copy of the manufacturer’s ISO 9001 quality management certificate if available. Sample units are typically offered in quantities of one to five pieces, packaged in anti‑static bags inside a sturdy box, allowing the buyer to assess performance with an optical spectrum analyzer. Minimum order quantities for production runs often start at 10 units per model, with lead times ranging from four to six weeks after order confirmation. Verify that the shipping terms include insurance coverage for the full invoice value, as laser equipment is sensitive to mechanical shock.

What types of laser wavelengths does Hoyatek provide?

The catalogue lists ASE sources covering the C‑band and L‑band, a 1550 nm DFB laser, tunable DWDM modules rated at 100 mW, a broadband SLED spanning 650‑1650 nm and a generic tunable light source. Each product is aimed at telecom, testing or broadband illumination applications.

Which safety standards apply to these laser products?

Buyers should verify compliance with IEC 60825‑1 laser safety classifications, typically Class 1 or Class 2 for telecom lasers. A safety test report confirming the classification should be requested before shipment.

What certifications should I ask for when importing these optical components from China?

Commonly required certifications include CE marking for the European Union, FCC certification for the United States, RoHS compliance for hazardous substance restrictions, and an ISO 9001 quality management certificate from the manufacturer if available.

How are the laser and LED modules usually packaged for export?

Export packs normally use anti‑static bubble wrap, sealed cartons with desiccant packs, and are loaded into 20 ft or 40 ft containers. Temperature‑controlled handling is often specified for longer sea voyages.

What is a typical minimum order quantity and lead time?

Production orders generally start at 10 units per model, with a lead time of four to six weeks after order confirmation. Sample requests can be fulfilled in smaller quantities, usually one to five pieces.

Which HS codes are relevant for these products?

Optical laser and LED modules fall under HS Chapter 85, specifically sub‑headings 8541 for optical fibres and accessories and 8543 for electrical apparatus with optical functions.

Which markets most frequently import laser equipment from Shenzhen manufacturers?

Major importers are telecom and data‑center operators in North America, Europe, Japan and South Korea, as well as medical device manufacturers and industrial metrology firms that require precise optical sources.