About Shanghai PAD Automatic Doors Technology Co., Ltd. - Cupboards, Doors, Gates, Grills & Windows Supplier in China

Shanghai PAD Automatic Doors Technology Co., Ltd. is located in Shanghai, China and currently lists five active products. The catalogue falls under the broader categories of "Cupboards, Doors, Gates, Grills & Windows" and "Agriculture", although all five items are automatic door solutions that use electromechanical assemblies classified under HS code 8479.89. The listed products include a Popular Design Intelligent Glass Door Opener, Automatic Sensor Sliding Door Operators, an Elegant Curved Automatic Glass Door, an Australia Best Sell Automatic Glass Door System, and an Automatic Sensor Glass Sliding Door. Each product description references materials such as steel, aluminum alloy, ABS plastic, tempered safety glass and electronic control components, reflecting a focus on industrial‑grade door hardware.

The supplier’s portfolio concentrates on motorised glass door systems that integrate sensor technology, sliding mechanisms and reinforced frames. The Intelligent Glass Door Opener and Sensor Sliding Door Operators are described as electromechanical assemblies with steel housings and aluminum rails, while the Elegant Curved Automatic Glass Door and the Australia Best Sell system emphasize aluminum alloy housings, steel tracks and tempered glass panels. The Automatic Sensor Glass Sliding Door combines a tempered safety glass pane with an aluminum alloy frame and steel rail system, indicating compliance with typical safety‑glass construction practices. All items share the HS‑code family 8479.89, which covers parts of machines used for a variety of applications.

Product Range and Specialties of Shanghai PAD Automatic Doors Technology Co., Ltd.

The five catalogued items cover motorised glass door openers, sensor‑driven sliding operators, curved glass door units and complete automatic glass door systems. In the industry, such products are commonly offered in grades that meet EN 124 (European standard for doors and gates) and UL 10B (fire safety testing). Tempered safety glass used in these doors typically complies with IEC 60335‑2‑15 and EN 12150, providing a minimum impact resistance of 30 J and a thickness range of 8 - 12 mm. Aluminum alloy frames are usually fabricated from EN 755‑2 alloy series (e.g., 6063‑T5) to balance strength and corrosion resistance, while steel housings often meet ASTM A36 specifications for structural applications. Buyers also look for motor torque ratings between 150 - 300 Nm, opening speeds of 30 - 120 mm s⁻¹ and sensor detection ranges of 2 - 5 m, which are standard performance parameters for commercial automatic doors.

Trade and Export Information - Shanghai PAD Automatic Doors Technology Co., Ltd.

China is a leading exporter of electromechanical door solutions, with major shipment volumes directed to Southeast Asia, the Middle East, Europe and North America. Products classified under HS code 8479.89 are typically inspected for conformity with safety standards such as CE marking for the EU, UL certification for the US and ISO 9001 quality management systems, although the supplier’s specific certifications are not listed. Export logistics commonly use 20‑ft or 40‑ft containers, with doors packed in reinforced wooden crates or bulk‑palletized units to protect glass panels and electronic components during sea transit. Standard Incoterms for these goods include FOB Shanghai or CIF destination port, allowing buyers to arrange inland freight and customs clearance. Chinese customs procedures for HS 8479.89 require a product safety declaration and, where applicable, a test report confirming compliance with the relevant national standards (e.g., GB 4208 for safety glass).

Sourcing from Shanghai PAD Automatic Doors Technology Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should request CE or UL test reports for the glass panels, motor torque specifications, and sensor performance data. A factory acceptance test (FAT) report that documents load‑bearing capacity, opening/closing cycles and emergency release operation is also customary. Because the catalogue does not state any certifications, buyers are advised to verify the supplier’s ISO 9001 registration and request material certificates for the aluminum alloy (e.g., EN 755‑2) and steel (e.g., ASTM A36). Sample units of the Intelligent Glass Door Opener or the Sensor Sliding Door Operator can be requested to assess fit, finish and control interface before committing to larger orders. Typical minimum order quantities for custom‑size glass door systems range from one unit for prototyping to multiples of ten for standard sizes, with lead times of 4 - 8 weeks after final design approval.

What product categories does Shanghai PAD Automatic Doors Technology Co., Ltd. list?

The supplier lists five automatic door products, including intelligent glass door openers, sensor‑driven sliding door operators, a curved glass door unit, a complete glass door system for the Australian market, and a sensor‑controlled glass sliding door.

Which HS code is associated with most of the listed products?

Four of the five items are classified under HS code 8479.89, which covers parts of machines used for various applications, including electromechanical door assemblies.

What materials are used in the Automatic Sensor Glass Sliding Door?

The Automatic Sensor Glass Sliding Door combines tempered safety glass, an aluminum alloy frame, a steel rail system and electronic sensor components, reflecting typical construction for commercial glass doors.

Are any certifications mentioned for these door systems?

The catalogue does not specify certifications. Buyers should request CE, UL or other relevant safety test reports and verify ISO 9001 quality management certification before purchase.

What are common specifications buyers look for in automated glass doors?

Typical specifications include tempered glass thickness of 8 - 12 mm, motor torque of 150 - 300 Nm, opening speed of 30 - 120 mm s⁻¹, sensor detection range of 2 - 5 m and compliance with EN 124 or UL 10B safety standards.

What packaging and shipping methods are standard for these products?

Automatic door units are usually packed in reinforced wooden crates or bulk‑palletized bundles, loaded into 20‑ft or 40‑ft containers, and shipped under FOB Shanghai or CIF terms.

What is a reasonable lead time for a custom glass door system?

For custom‑size glass door systems, lead times typically range from four to eight weeks after design approval and receipt of required certifications.

How should a buyer request a sample?

Buyers can request a functional sample of the Intelligent Glass Door Opener or the Sensor Sliding Door Operator, specifying the desired dimensions and requesting accompanying material certificates and performance test reports.