About Shanghai Delex Mould Products Co., Ltd - Injection Moulded Products Supplier in China

China hosts the six listed products of Shanghai Delex Mould Products Co., Ltd, covering mould bases, plastic mould bases, die‑casting mold bases, tool steels, injection mould bases and blow mould bases. The catalogue aligns with the broader categories of Injection Moulded Products, Dies & Mouldings and Tools & Instruments, and each item falls under typical HS‑code families such as 8479 (parts for molding machines) and 8465 (tools and implements).

The supplier’s active product count of six reflects a focused portfolio that includes both standard mould bases and specialised steel grades for high‑pressure applications. Products are described by type rather than by a single material, indicating that the company offers variations suitable for injection, blow and die‑casting processes, all of which are common inputs for automotive, consumer‑electronics and appliance manufacturers.

Product Range and Specialties of Shanghai Delex Mould Products Co., Ltd

The catalogue lists six concrete items: mould base, plastic mould base, die‑casting mold base, tool steels, injection mould base and blow mould base. In the mould‑making industry these items are typically supplied in hardened steel grades such as P20, H13 or S7, with hardness values ranging from 28‑32 HRC for P20 up to 45‑50 HRC for H13. Standard tolerances for mould bases are usually ±0.02 mm on critical dimensions, and surface finish specifications often target Ra 0.8 µm or better for high‑speed injection cycles.

Tool steels offered for mould making are commonly delivered in round bars, billets or pre‑machined plates, and buyers usually request chemical composition certificates (e.g., C 0.30‑0.45 %, Cr 5‑6 %). For plastic and blow mould bases, pre‑treated surfaces such as nitrided or chrome‑plated finishes are standard to improve wear resistance and reduce sticking.

Trade and Export Information - Shanghai Delex Mould Products Co., Ltd

China is a leading exporter of mould components, with Europe, North America and Southeast Asia representing the largest import regions for injection‑moulded product tooling. HS‑code 8479.90 covers most mould bases, while HS‑code 8465.10 applies to tool steels and related implements. Buyers typically require ISO 9001 quality‑management certification and, for automotive‑related moulds, ISO/TS 16949 or IATF 16949 compliance. Export shipments are normally packed in wooden crates on standard 20‑ft or 40‑ft containers, with a typical load of 20‑30 medium‑size mould bases per 20‑ft box.

Incoterms most often used are FOB Shanghai for bulk orders and CIF major ports such as Rotterdam or Los Angeles for smaller consignments. Chinese manufacturers frequently provide pre‑shipment inspection reports (e.g., SGS or BVQI) to satisfy importer due‑diligence, especially when the destination market imposes CE or UL conformity for equipment that will be integrated into production lines.

Sourcing from Shanghai Delex Mould Products Co., Ltd - Buyer Guidance

When sourcing mould bases from this supplier, request a detailed material test report (MTR) that lists chemical composition, hardness, and heat‑treatment parameters. Verify that the supplied grades match the intended application - P20 for general‑purpose plastic injection, H13 for high‑temperature die‑casting, or S7 for shock‑resistant tooling. Buyers should also ask for dimensional drawings, a sample of the surface finish, and a third‑party inspection certificate before confirming the order.

Typical lead times for hardened mould bases range from four to eight weeks after order confirmation, depending on the heat‑treatment cycle and any custom machining. Minimum order quantities are usually one base per specification, but shipping costs are optimized when multiple units are consolidated into a single container. Ensure that the supplier can provide the required export documentation, such as a commercial invoice, packing list, and any country‑specific certificates of conformity.

What material grades are available for the mould bases listed by Shanghai Delex?

The catalogue does not list specific grades, but in the Chinese mould‑making market bases are commonly supplied in P20, H13 or S7 tool steel. Buyers should request the exact steel grade and heat‑treatment record in the material test report.

Are tool steels from this supplier pre‑hardened?

Tool steels are usually delivered pre‑hardened to meet industry hardness standards (e.g., 28‑32 HRC for P20). Confirm the hardness value and heat‑treatment process in the supplier’s certification before purchase.

Which HS codes apply to the products offered?

Mould bases fall under HS 8479.90 (parts for molding machines) and tool steels under HS 8465.10 (tools, implements and cutlery). These codes are used for customs clearance in most importing countries.

What certifications should a buyer request for these mould components?

Typical certifications include ISO 9001 for quality management, ISO 14001 for environmental compliance, and, for automotive‑related tooling, IATF 16949. Material test certificates and third‑party inspection reports are also standard.

How are the mould bases packaged for export?

Standard practice is to pack each base in a wooden crate with internal bracing, then load the crates onto standard pallets. A 20‑ft container can hold roughly 20‑30 medium‑size bases, while a 40‑ft container can accommodate 40‑60 depending on dimensions.

What Incoterms are commonly used for shipments from Shanghai?

FOB Shanghai is the most common term for bulk orders, allowing the buyer to arrange freight. For smaller consignments CIF to the buyer’s destination port is also frequently offered.

What documentation is needed for customs clearance in Europe or the US?

A commercial invoice, packing list, certificate of origin, material test report and any required conformity certificates (e.g., CE for EU, UL for US) are typically required.

What is a realistic lead time for an injection mould base?

Lead times usually range from four to eight weeks after order confirmation, depending on the heat‑treatment schedule and any custom machining requested.