Shandong Yafeite Metal Products Co., Ltd

Shandong Yafeite Metal Products Co., Ltd is based in Shandong province, China and currently lists eight active products across its catalogue. The company’s top categories include abrasives, steel balls and lead, and the product list covers cast steel shot, forged grinding steel ball, garnet abrasive, cast steel grit (HS code 7204.10, high‑carbon cast steel), steel cut wire shot (HS code 7326.90, high‑carbon steel S330/S550), cast grinding steel ball (HS code 7325.90, high‑carbon chrome steel or low‑chrome alloy), lead sheet (HS code 7804.11, electrolytic grade 99.99 % Pb) and iron shot and grit for balance weight (HS code 7205.10, chilled cast iron with defined C, Si, Mn contents). Each item is classified under the HS‑code families for steel products, abrasive minerals and lead, reflecting standard customs tariff headings. The catalogue entries specify material compositions such as 0.85‑1.2 % carbon for cast steel grit and 2.0‑3.5 % carbon for the chilled cast iron grit used in balance weights. These compositions align with typical industrial requirements for shot blasting media, grinding media and lead sheet applications. The supplier’s product set therefore spans both metallic shot media and mineral abrasive, as well as high‑purity lead sheet used in electrical and radiation shielding contexts.

The eight listed items include metallic shot and grit products such as cast steel shot, steel cut wire shot, cast steel grit and iron shot for balance weight, each produced from high‑carbon steel or cast iron grades that meet ISO 13399 for abrasive media and ISO 3317 for steel shot. Typical size ranges for steel shot run from 0.2 mm to 4 mm diameter, with hardness values of 55‑65 HRC for high‑carbon grades. Garnet abrasive is commonly supplied in grain sizes ranging from 40 to 120 mesh, with a Mohs hardness of 7.5 and a typical Fe₂O₃ content above 70 %. The forged and cast grinding steel balls are usually offered in diameters from 2 mm to 20 mm and conform to ISO 6508 hardness specifications (HRC 58‑62). Lead sheets are produced in thicknesses from 0.2 mm up to 5 mm, with purity of 99.99 % Pb and are often certified to ASTM B52 for lead sheet. Industry practice for these categories requires material test reports that confirm carbon content, alloying elements, grain size distribution for abrasives and purity for lead. Buyers also look for compliance with REACH for lead products and with ISO 9001 quality management in the metal shot and grinding media supply chain.