About RMY INTERNATIONAL - Stone Products Supplier in Pakistan

RMY INTERNATIONAL is based in Pakistan and currently lists nine active products. All items belong to the stone product segment, specifically onyx and related kitchen accessories, and are grouped under the HS‑code prefixes shown in the catalogue (e.g., rmy 002 to rmy 09). The supplier’s top categories are recorded as Granite & Marble Products, Marble & Granite, and Stone Products, indicating a focus on natural stone fabrication. The catalogue includes items such as ONYX BEAR, ONYX FLOWER VASES, ONYX CUBE LAMP and ONYX BALUSTRADE, each identified with its own HS‑code and material designation as Stone. This factual profile reflects a narrow product set centred on decorative onyx pieces rather than bulk stone slabs.

The listed products are all manufactured from natural onyx, a translucent carbonate stone commonly used for decorative interiors. Each entry specifies the material as "STONE" and the catalogue assigns a unique HS‑code string (for example, rmy 005 for ONYX CUBE LAMP). No additional product families such as tiles or countertops are mentioned, so the supplier’s current offering is limited to ornamental objects and a single kitchen‑accessories line. The active product count of nine confirms a concise catalogue that can be easily audited against the provided HS‑code identifiers.

Product Range and Specialties of RMY INTERNATIONAL

The catalogue covers nine distinct items, beginning with a generic "Kitchen Accessories" entry (HS‑code rmy 002) followed by eight onyx decorative pieces: ONYX BEAR (rmy 003), ONYX FLOWER VASES (rmy004), ONYX CUBE LAMP (rmy 005), ONYX TABLE (rmy 006), ONYX PLATE (rmy007), ONYX BALLS (rmy 008), ONYX BALUSTRADE (rmy 009) and ONYX OBELISKS (rmy 09). In the stone industry, onyx products are typically graded by colour uniformity, translucency and surface finish, with Grade A indicating minimal veining and a high polish level. Common specifications include thicknesses of 20 - 30 mm for decorative items, a polished or honed finish measured by a surface roughness of Ra ≤ 0.8 µm, and dimensions recorded in millimetres for each piece. Buyers often request a material data sheet that lists the stone’s compressive strength (generally 50 - 80 MPa for onyx) and water absorption (below 0.5 %).

Trade and Export Information - RMY INTERNATIONAL

Pakistan is a recognised exporter of natural stone, with the majority of shipments classified under HS Chapter 68 (stone, plaster, cement). Export volumes of onyx and other ornamental stones are traditionally directed to the Middle East, European Union, and North American markets, where interior designers source high‑visibility decorative objects. Typical import documentation includes a commercial invoice, packing list, certificate of origin, and, where required, a laboratory test report confirming mineral composition and mechanical properties. Buyers frequently ask for ISO 9001 quality‑management certification or a CE conformity declaration for stone products intended for the EU market, even though such certifications are not listed for this supplier. Logistics for onyx items usually involve wooden crates or reinforced cardboard boxes, palletised for 20‑ft or 40‑ft containers, with CIF or FOB terms most common in B2B trade.

Sourcing from RMY INTERNATIONAL - Buyer Guidance

When evaluating RMY INTERNATIONAL, buyers should request a detailed material certificate that confirms the onyx grade, origin, and key physical properties such as compressive strength and moisture content. A third‑party laboratory report verifying colour consistency, translucency and surface finish is standard for decorative stone items and should be obtained before finalising a purchase. Samples of representative pieces (e.g., a small onyx vase) are advisable to assess finish quality and dimensional accuracy, and the supplier’s response time to sample requests can indicate production flexibility. Verify that packaging complies with international freight standards - wooden crates should be heat‑treated according to ISPM 15 to prevent pest issues, and crate dimensions must match container loading plans to avoid damage during transit.

What material are the listed products made from?

All nine catalogue items are manufactured from natural onyx stone, identified in the facts as material "STONE".

Which HS‑code system is used for these products?

Each product is assigned a supplier‑specific HS‑code string (e.g., rmy 005 for ONYX CUBE LAMP) as provided in the catalogue; these map to the broader HS Chapter 68 for stone products.

What typical specifications should I check for onyx decorative items?

Buyers normally verify thickness (20‑30 mm), surface roughness (Ra ≤ 0.8 µm), colour uniformity, translucency level and compressive strength (50‑80 MPa).

Are any certifications required for importing onyx from Pakistan?

While the supplier does not list certifications, importers commonly request ISO 9001, a certificate of origin and a lab test report confirming mineral composition and mechanical properties.

What is the usual packaging for these stone products?

Onyx items are typically packed in heat‑treated wooden crates or reinforced cardboard boxes, palletised for 20‑ft or 40‑ft containers, with padding to protect delicate surfaces.

What are typical minimum order quantities and lead times?

For decorative onyx pieces, suppliers often set MOQ ranges from 50 to 200 units per item, with lead times of 30‑45 days after order confirmation, depending on production scheduling.

How can I request a sample before placing a full order?

Contact the supplier to arrange a sample of the specific onyx item; standard practice is to pay for shipping and receive a small unit that demonstrates finish, dimensions and colour.

Which regions most frequently import onyx products from Pakistan?

The primary import markets are the Gulf Cooperation Council countries, the European Union and the United States, where interior designers and architects source ornamental stone pieces.