About Ningbo Ideal Anticorrosion Material Co., Ltd. - Packaging Tapes Supplier in China

Ningbo Ideal Anticorrosion Material Co., Ltd. is located in Ningbo, Zhejiang province, China and currently lists six active packaging‑tape products. The catalogue is grouped under the single category “Packaging Tapes” and includes items such as inner tape, cold‑applied tape, polyethylene (PE) anticorrosion tape for pipes, protective steel‑pipeline primer tape, jumbo roll tape, joint tape and outer tape. Each product is presented without additional HS‑code data, focusing on functional descriptions rather than technical codes.

The supplier’s product set covers both surface‑protective and sealing applications. Inner and outer tapes are typically used for temporary protection during handling, while joint and protective pipeline tapes provide corrosion resistance for steel infrastructure. Jumbo rolls refer to large‑diameter rolls designed for high‑volume users. The cold‑applied tape line indicates a pressure‑sensitive adhesive that does not require heat activation, a common requirement for fast installation in field conditions.

Product Range and Specialties of Ningbo Ideal Anticorrosion Material Co., Ltd.

The catalogue lists six tape variants that address different stages of pipe and steel‑structure protection. Inner tape and outer tape are generally supplied in widths of 50‑150 mm and thicknesses of 0.1‑0.3 mm, with rubber‑based adhesives offering peel adhesion values of 150‑250 g/25 mm (ASTM D‑2256). Cold‑applied tape uses acrylic adhesives that retain flexibility from - 20 °C to +80 °C, a typical temperature range for outdoor installation. Polyethylene anticorrosion tape for pipes is usually a PE‑film laminate with a thickness of 0.2‑0.5 mm, providing a water‑vapor transmission rate below 5 g/m²·24 h and chemical resistance to common pipeline fluids.

Joint tape and protective pipeline primer tape often incorporate a primer layer that improves bond to steel, followed by a self‑adhesive film. Industry standards such as ASTM D‑2559 (standard test method for anticorrosion coating adhesion) and ISO 9001 quality‑management practices are frequently referenced for these products. Jumbo rolls are supplied on cores up to 1 m in diameter, allowing 3 000‑5 000 m of tape per roll, which reduces handling time for large projects.

Trade and Export Information - Ningbo Ideal Anticorrosion Material Co., Ltd.

China is a major exporter of packaging and protective tapes, with shipments typically directed to the Middle East, Southeast Asia, Africa and parts of Europe where oil‑and‑gas, construction and infrastructure sectors require corrosion‑resistant sealing solutions. The HS‑chapter 39 family (self‑adhesive plates, sheets, film, foil etc.) covers most tape products, and customs authorities often request material safety data sheets (MSDS) and compliance certificates for chemical‑resistant grades.

Export logistics for the listed tape types commonly use 20‑ft or 40‑ft containers; a standard 20‑ft container can hold roughly 1 200 rolls of 50 m length, while a 40‑ft container accommodates up to 2 300 rolls depending on core size. Buyers usually request ISO 9001 or ISO 14001 certification, CE marking for EU markets, and test reports confirming tensile strength (10‑30 N/mm), elongation at break (150‑250 %), and adhesion performance. Packaging is typically shrink‑wrapped at the roll level and palletized on wooden pallets with Euro‑pallet dimensions for ease of handling.

Sourcing from Ningbo Ideal Anticorrosion Material Co., Ltd. - Buyer Guidance

When sourcing tapes from Ningbo Ideal Anticorrosion Material Co., Ltd., buyers should request a product data sheet that specifies film thickness, adhesive type, temperature range and mechanical properties such as tensile strength and elongation. Samples of each tape variant (e.g., 10 m of inner tape, 5 m of PE anticorrosion tape) allow verification of adhesion, flexibility and resistance to oil or water exposure before committing to larger orders.

Buyers are advised to ask for recent third‑party test reports that cover ASTM D‑2256 peel adhesion, ASTM D‑2559 coating adhesion and any relevant chemical‑resistance tests. Confirmation of ISO 9001 quality‑management certification or equivalent documentation helps assess the supplier’s compliance with international quality expectations. Verify packaging details (shrink‑wrap, pallet configuration) and confirm Incoterms such as CIF or FOB to align logistics responsibilities.

What types of tapes does Ningbo Ideal Anticorrosion Material Co., Ltd. offer?

The supplier lists six tape products: inner tape, cold‑applied tape, PE anticorrosion tape for pipes, protective steel‑pipeline primer tape, jumbo roll tape, joint tape and outer tape, all classified under Packaging Tapes.

Are the tapes suitable for pipe corrosion protection?

Yes, the polyethylene anticorrosion tape and the protective pipeline primer tape are designed for steel pipe surfaces and typically meet ASTM D‑2559 adhesion requirements for anticorrosive coatings.

What adhesive systems are used in the cold‑applied tape?

Cold‑applied tape usually incorporates an acrylic pressure‑sensitive adhesive that remains effective from - 20 °C to +80 °C and provides peel adhesion in the range of 150‑250 g/25 mm (ASTM D‑2256).

How are the jumbo rolls packaged for shipment?

Jumbo rolls are wound on cores up to 1 m in diameter, shrink‑wrapped individually and palletized on standard Euro‑pallets, allowing efficient loading into 20‑ft or 40‑ft containers.

Which certifications should a buyer request from this supplier?

Buyers should request ISO 9001 or ISO 14001 quality‑management certificates, CE marking for EU shipments, and third‑party test reports for tensile strength, adhesion and chemical resistance.

What are typical minimum order quantities (MOQs) for these tapes?

MOQs vary by product; for standard width rolls the supplier generally requires a minimum of one full roll per SKU, while jumbo rolls may have an MOQ of one roll due to their size.

What documentation is needed for customs clearance?

Customs authorities usually ask for a commercial invoice, packing list, material safety data sheet (MSDS) for the tape material, and any applicable certification copies such as ISO or CE.

Which regions commonly import these packaging tapes?

Major import markets include the Middle East (oil‑and‑gas pipelines), Southeast Asian construction projects, African infrastructure developments and European manufacturers that need protective sealing solutions.