About Mannohar Lal Hira Lal Limited - Steel Wires Supplier in India

India hosts Mannohar Lal Hira Lal Limited, a supplier that lists 18 distinct wire products across steel and copper families. The catalogue spans Steel Wires, Metal Wire, Wires & Cables, Welding Wires & Supplies, Copper Wires and Washers. Items include MIG Wire, Copper Coated‑Wire (HS 7409.29, mild steel rod with copper electrode coating), Barbed Wire (HS 7313.00, galvanized steel), Cable Armouring Wire, Spring Steel Wire/High Carbon Wire (HS 7217.10, unalloyed high carbon steel 0.60‑0.95% C), ACSR Core Wire, Galvanised Wire (HS 7217.20, low carbon steel hot‑dip zinc), and several specialised forms such as G.I. Wire, Earth Wire, Circlip Wire, Spring Washer Wire, Shaped Wire, Stay Wire, Bearing Wires, Rope Wire, Needle Wire and Spoke Wire. Each product is identified by its HS code and base material: for example, Galvanised Spring Steel Wire (HS 7217.20) uses high‑carbon steel (0.60‑0.95% C) with zinc coating, while Spoke Wire (HS 7217.20) is high‑carbon steel with manganese content 0.3‑0.9%. The supplier’s range covers low‑carbon (≤0.30% C) and high‑carbon (≥0.60% C) steel grades, copper‑coated electrode wire, and zinc‑galvanised variants used in fencing, cable armouring, and mechanical springs. The product list also includes bearing wires (HS 7217.30, SAE 1070 equivalent) and various wire forms for construction and automotive applications.

Product Range and Specialties of Mannohar Lal Hira Lal Limited

From the 18 listed items, Mannohar Lal Hira Lal Limited offers MIG welding wire, copper‑coated electrode wire, barbed and galvanised fencing wire, ACSR core strands, and a suite of high‑carbon spring and bearing wires. In the steel wire market, common grades include ASTM A131 for low‑carbon steel wire (≤0.25% C) and ASTM A228 for music‑wire spring steel (0.70‑0.95% C). Copper‑coated wires for welding typically meet ISO 14345 specifications and are supplied in diameters from 0.8 mm to 2.5 mm, with tensile strengths between 600 - 900 MPa. Buyers of wire products usually specify tensile strength, elongation, coating thickness and corrosion resistance. For galvanized wires, a zinc coating of 5 - 12 µm is standard, while copper‑coated wires often require a copper layer of 5 - 15 µm to achieve adequate conductivity for welding. Standard packaging includes 1 ton cardboard bundles or 25 kg paper reels, and HS chapter 72 (iron and steel) and chapter 74 (copper) classifications apply for customs duties.

Trade and Export Information - Mannohar Lal Hira Lal Limited

India is a major exporter of steel and copper wire products, with shipments frequently directed to the Middle East, Africa, Southeast Asia and Europe. The HS 72 series (e.g., 7217.10, 7217.20, 7217.30) and HS 74 series (7409.29) are subject to anti‑dumping duties in several markets, and buyers often request ISO 9001 quality management certification and compliance with ASTM or IEC standards. For copper‑coated welding wire, CE marking or EN ISO 14345 may be required for European customers. Typical export logistics involve 20‑ft or 40‑ft containers loaded with bundled wire reels, with moisture‑resistant packaging to prevent corrosion. Common Incoterms are FOB Mumbai or CIF Dubai, depending on the destination port. Export documentation generally includes commercial invoice, packing list, certificate of origin, and where applicable, a test report confirming tensile strength and coating thickness.

Sourcing from Mannohar Lal Hira Lal Limited - Buyer Guidance

Prospective buyers should request mill test certificates that detail chemical composition, tensile strength, elongation and coating thickness for each wire grade. For galvanized products, a zinc coating weight test (ISO 14713) and corrosion resistance test (salt spray, ASTM B117) are standard verification steps. Samples of typical diameters allow assessment of flexibility and spring properties before bulk orders. Verify that the supplier can provide ISO 9001 or equivalent quality system documents, and confirm the HS code alignment with the intended customs classification. Minimum order quantities for bulk wire reels are usually 2 tons, with lead times ranging from 30 to 45 days depending on the grade and coating process. Buyers should also confirm packaging dimensions (e.g., 1 ton per 120 cm × 80 cm × 100 cm crate) to plan container loading.

What wire grades are available for fencing applications?

The catalogue includes Barbed Wire (HS 7313.00) made from galvanized steel, Galvanised Wire (HS 7217.20) and Stay Wire (HS 7217.20), all with hot‑dip zinc coating and carbon content up to 0.30 % for low‑carbon variants. Typical tensile strength for these grades ranges from 400 MPa to 600 MPa.

Which specifications apply to the Copper Coated‑Wire?

Copper Coated‑Wire (HS 7409.29) uses a mild‑steel rod with a copper electrode coating, commonly meeting ISO 14345 for welding wire. Buyers usually request a copper layer thickness of 5 - 15 µm and a tensile strength of 600‑900 MPa.

What are the standard coating requirements for galvanized wires?

Galvanised Wire and G.I. Wire (HS 7217.20) are hot‑dip zinc coated, typically with a coating weight of 5 - 12 µm as per ISO 14713. This provides corrosion resistance suitable for outdoor and agricultural use.

Which certifications should be requested for steel wire imports?

Importers normally ask for ISO 9001 quality management certification, mill test certificates conforming to ASTM A131 (low‑carbon) or ASTM A228 (spring steel), and where applicable CE or EN compliance for European markets.

What packaging and container sizes are used for bulk wire shipments?

Bulk wire is usually packed in 25 kg paper reels or 1 ton cardboard bundles, loaded into 20‑ft or 40‑ft containers. A standard 1 ton crate measures approximately 120 cm × 80 cm × 100 cm.

What is the typical lead time for high‑carbon spring wire?

Lead times for high‑carbon spring wire (e.g., Bearing Wires, Rope Wire, Needle Wire) are generally 30‑45 days from order confirmation, depending on coating and heat‑treatment requirements.

How can a buyer verify the HS code classification before ordering?

Buyers should compare the product description, material composition and coating with the HS code listed in the catalogue (e.g., 7217.10 for high‑carbon spring steel, 7217.20 for zinc‑galvanised low‑carbon steel) and request a customs pre‑clearance opinion or a certificate of origin that confirms the code.