About Kushal Poly Plast - Plastic Household Products Manufacturer in India

Kushal Poly Plast is a manufacturer of plastic household products based in Ahmedabad, Gujarat, on India's western industrial corridor, with 5 active products listed across plastic personal-care accessories and adjacent FMCG categories. The company's catalogue is built around polypropylene (PP) soap cases and a polypropylene cloth clip, all classified under HS code 3924.90, which covers tableware, kitchenware, other household articles and toilet articles of plastics. Its listed top categories span soap dispensers, baby soap, soaps and detergents, paper soap, cosmetic spray bottles, hand sanitizer dispensers, cosmetic packaging boxes and frozen peach, indicating a broader interest in personal-care and consumable packaging beyond the 5 SKUs currently active in the catalogue. Operating from Gujarat gives Kushal Poly Plast direct access to one of India's largest polymer processing clusters, where polypropylene resin, masterbatch colourants and injection-mould tooling are sourced locally in high volume. The 5 active SKUs are all positioned in the bathroom and laundry accessory segment, a category where Indian manufacturers typically supply both domestic retail chains and overseas private-label buyers. The combination of HS 3924.90 raw-material classification (polypropylene) and the listed consumable categories suggests a supplier whose production line is set up for short-cycle injection moulding of small-format plastic articles rather than large hollowware or film products.

Product Range and Specialties of Kushal Poly Plast

The active catalogue of Kushal Poly Plast covers 5 SKUs: Regent Soap Case, Peach Soap Case, Aristocrat Soap Case, Ecstacy Soap Case, and Viola Cloth Clip. All five items are moulded from polypropylene and classified under HS 3924.90 (tableware, kitchenware and other household articles of plastics). Polypropylene is the standard material for this category because it tolerates repeated wet-room exposure, resists common surfactants in soap and detergent solutions, and accepts a broad selection of pastel and translucent masterbatch colours used in bathroom accessories. Buyers in this segment typically see nominal wall thicknesses of 1.5 to 2.5 mm, part weights in the 15 to 60 g range for soap cases, and clip-style accessories in the 5 to 20 g range, depending on size. In the broader plastic household accessories category, buyers usually work with injection-moulded PP and, less commonly, ABS or SAN for transparent parts. Common variants include hinged clamshell soap boxes, two-piece snap-fit cases, vented designs for soap drying, and magnetic or spring-clip laundry pegs. Surface finishes range from matte soft-touch to high-gloss polish, and colour matching is typically done against Pantone or RAL references. For personal-care accessories sold alongside soaps and detergents, food-contact and skin-contact safety expectations apply in many import markets, so buyers generally request declarations on heavy-metal content, phthalate-free status and, where relevant, REACH or FDA compliance for the finished article.

Trade and Export Information - Kushal Poly Plast

Plastic household articles under HS 3924.90 from India are typically exported to the Middle East (UAE, Saudi Arabia, Oman), Africa (Kenya, Nigeria, South Africa, Egypt), South and Southeast Asia (Sri Lanka, Bangladesh, Vietnam, Indonesia), and to a lesser extent Eastern Europe and Latin America. Indian PP moulders in Gujarat and Maharashtra commonly ship in corrugated 5-ply export cartons with inner polybags, packed in standard 20 ft or 40 ft dry containers at roughly 15 to 25 cubic metres of usable volume per FCL depending on SKU dimensions. For bathroom and laundry accessories, Incoterms such as FOB Mundra or Nhava Sheva, CIF destination port, and occasionally DAP are the most frequently used terms in this trade lane. Buyers of plastic personal-care accessories in these regions typically require a baseline set of documents: commercial invoice, packing list, bill of lading or airway bill, certificate of origin (often under a preferential scheme such as India's GSP or bilateral FTA where applicable), and a material safety data sheet or technical data sheet for the polypropylene grade used. For goods entering the EU, REACH compliance and, where the article can be mouth-contacted, food-contact statements under EU Regulation 1935/2004 or FDA 21 CFR for the US market are commonly requested. India is one of the larger exporters of HS 3924.90 articles globally, and Gujarat-based manufacturers benefit from proximity to the ports of Mundra and Kandla, which handle a significant share of India's plastic-houseware export volume.

Sourcing from Kushal Poly Plast - Buyer Guidance

When sourcing from Kushal Poly Plast, a buyer should request the production-grade polypropylene specification (for example, injection-moulding grade with melt flow index in the 8 to 15 g/10 min range) and confirm the colour masterbatch supplier, since colour consistency is a recurring issue in PP moulding. A pre-shipment sample of each of the 5 listed SKUs (Regent, Peach, Aristocrat, Ecstacy soap cases and Viola cloth clip) should be requested along with a dimensional drawing and weight tolerance, typically plus or minus 2 to 5 percent for small injection-moulded parts. Standard documents to ask for include the commercial invoice, packing list, certificate of origin, and a REACH or FDA declaration if the destination market requires it. Verification points specific to this category include checking the hinge or snap-fit cycle life for soap cases (commonly rated at 5,000 to 10,000 open-close cycles in quality production), confirming that the polypropylene used is BPA-free and phthalate-free, and reviewing the inner-pack polybag specification to avoid odour transfer in sealed export cartons. A reasonable MOQ for custom-coloured PP injection moulding in this segment typically starts at one 20 ft container mixed across SKUs, with production lead times of 25 to 45 days after mould approval. Third-party pre-shipment inspection covering AQL sampling (commonly 1.5 or 2.5 for general inspection of consumer plastics) is standard practice for first-time buyers.

What product categories does Kushal Poly Plast currently list?

Kushal Poly Plast lists 5 active SKUs in plastic household accessories: Regent, Peach, Aristocrat and Ecstacy soap cases, plus the Viola cloth clip. All are moulded from polypropylene and classified under HS code 3924.90. Its top categories also reference soap dispensers, baby soap, paper soap, cosmetic spray bottles, hand sanitizer dispensers and cosmetic packaging boxes, suggesting a wider personal-care packaging focus beyond the active catalogue.

Which material is used for the soap cases and cloth clip?

Every active SKU in the catalogue is made of polypropylene (PP), the standard injection-moulding polymer for bathroom and laundry accessories because of its moisture resistance, surfactant tolerance and colourability. Buyers should request the specific PP grade, melt flow index and masterbatch source on enquiry.

What HS code applies to the listed products?

All five items, Regent Soap Case, Peach Soap Case, Aristocrat Soap Case, Ecstacy Soap Case and Viola Cloth Clip, are classified under HS 3924.90, which covers tableware, kitchenware, other household articles and toilet articles of plastics. This is the standard tariff line for injection-moulded PP bathroom accessories in most customs regimes.

Which documents and certifications should a buyer request?

Buyers should request a commercial invoice, packing list, bill of lading, certificate of origin, and a technical or material data sheet for the polypropylene used. For the EU, a REACH declaration and, where relevant, an EU 1935/2004 food-contact statement are commonly required; for the US, an FDA 21 CFR food-contact declaration may be requested if the article can contact skin or mouth.

What quality parameters are typical for PP soap cases and clips?

Typical parameters include part weight tolerance of plus or minus 2 to 5 percent, wall thickness of 1.5 to 2.5 mm, hinge or snap-fit cycle life of 5,000 to 10,000 cycles, and colour match against an agreed Pantone or RAL reference. BPA-free and phthalate-free declarations are standard requirements in most import markets for personal-care plastic articles.

What is the typical MOQ and lead time for this category?

For custom-coloured PP injection moulding of bathroom accessories, MOQ usually starts at one 20 ft container mixed across SKUs, with production lead times of 25 to 45 days after mould or colour approval. Repeat orders of standard colours can often ship within 15 to 25 days, subject to machine availability.

How are the goods typically packed and shipped?

Plastic household accessories from India are typically packed in corrugated 5-ply export cartons with inner polybags, then loaded into 20 ft or 40 ft dry containers. Common Incoterms in this trade lane are FOB Mundra or Nhava Sheva, CIF destination port, and occasionally DAP, with Mundra being the closest major port to Ahmedabad in Gujarat.

How can a buyer verify quality before shipment?

A third-party pre-shipment inspection using AQL 1.5 or 2.5 general inspection levels is standard for consumer plastics, covering appearance, dimensions, weight, colour, and function (hinge or clip operation). Buyers should also request a golden sample signed off before production and a sealed reference sample retained for comparison against bulk shipments.