About Kharkov Energo Pribor Ltd. - Electric Components Supplier in Ukraine

Ukraine hosts Kharkov Energo Pribor Ltd., which currently lists eight distinct products in its catalogue. The supplier’s portfolio spans electric components, tools and instruments, agriculture equipment, light and medium machinery, DC/AC inverters and converters, and electric circuit breakers. Each entry corresponds to a specific testing or measurement device used in high‑voltage and low‑frequency applications. The catalogue includes items such as an insulating oil tester, a vehicle‑mounted diagnostic system, and a fault locating system. The product set reflects a focus on electrical testing and measurement equipment. The eight listed products cover both hardware and software‑enabled instruments, with three items assigned HS codes: the New Vlf‑60 AC Hipot (HS 9030.39) and the Circuit Breaker Tester (HS 9030.32) fall under the HS chapter 9030 group for measuring and testing equipment, while the Low Frequency Generator Lfg‑50 (HS 8543.70) is classified under HS chapter 8543 for electrical machines. Materials noted in the facts include steel housings, electronic components, copper wiring, and printed circuit boards, typical for rugged test equipment. High‑voltage test systems such as the Hvts‑hp Series are designed for insulation testing up to several hundred kilovolts. The catalogue therefore provides a concise view of Ukrainian‑manufactured testing gear for power‑system maintenance and commissioning.

Product Range and Specialties of Kharkov Energo Pribor Ltd.

Kharkov Energo Pribor Ltd.’s catalogue features insulating oil testers, high‑voltage test systems, VLF (very‑low‑frequency) hipot units, low‑frequency generators, fault locating systems, and circuit‑breaker testers. In the electrical test equipment market, insulating oil testers are typically calibrated to IEC 60587 specifications and measure dielectric strength in kV·cm. VLF hipot devices such as the Vlf‑60 series commonly operate at frequencies between 0.1 Hz and 10 Hz, delivering test voltages up to 500 kV in accordance with IEC 60060‑2. Low‑frequency generators under HS 8543.70 are usually rated for output powers between 1 kW and 10 kW, with frequency ranges of 0.1 Hz to 100 Hz, and are built to IEC 60034 standards for electrical machines. Circuit‑breaker testers and fault locating systems are generally designed to verify breaking capacity and insulation integrity, often adhering to IEC 60947‑2 and IEC 61850 testing protocols. Typical steel‑enclosed test units incorporate copper windings and PCB assemblies, providing robustness for field deployments. Buyers in the power‑distribution sector frequently request compliance documentation such as IEC type‑approval certificates and calibration logs for these instruments.

Trade and Export Information - Kharkov Energo Pribor Ltd.

Ukraine has a well‑established export base for electrical testing and measurement devices, with primary markets in the European Union, the Middle East, and Central Asia. Products classified under HS 9030 and HS 8543 are subject to customs inspections that verify conformity with international safety standards, and many importers require CE marking or IEC type‑approval before acceptance. Shipping of the eight‑item range is typically arranged in standard 20‑ft or 40‑ft containers, using wooden crates or reinforced pallets to protect steel‑housing equipment during sea freight. Common Incoterms used by Ukrainian exporters include FOB (Ukrainian port) and CIF (destination port). Buyers should anticipate documentation packages that include a commercial invoice, packing list, certificate of origin, and any relevant test certificates. For high‑voltage test systems, export controls may apply, and exporters often secure an export license in accordance with Ukrainian regulations. Logistics providers familiar with hazardous‑goods handling are engaged when devices contain oil or other liquids, ensuring compliance with IMO and IATA guidelines.

Sourcing from Kharkov Energo Pribor Ltd. - Buyer Guidance

Prospective buyers of Kharkov Energo Pribor Ltd.’s equipment should request the latest IEC calibration certificates and, where applicable, CE conformity declarations for each unit. Verification of the HS code on the commercial invoice (9030.32, 9030.39, 8543.70) helps customs authorities match the shipment to the declared product category. It is advisable to obtain a functional sample or a video demonstration, especially for VLF hipot and high‑voltage test systems, to confirm voltage range, frequency settings, and user interface. Typical minimum order quantities for test equipment are one unit per model, with lead times ranging from four to eight weeks depending on the complexity of the device and any required calibration. Buyers should also confirm packaging details - crated steel cases with foam padding - and request a pre‑shipment inspection report to ensure no damage occurred during handling. Ensuring that the supplier can provide ISO 9001 quality‑management certificates, even if not listed, adds an extra layer of assurance for long‑term procurement.

What types of testing equipment does Kharkov Energo Pribor Ltd. offer?

The catalogue includes an insulating oil tester, VLF hipot units (New Vlf‑60), a vehicle‑mounted diagnostic system, a high‑voltage test system (Hvts‑hp series), a fault locating system (Swg‑12), a low‑frequency generator (Lfg‑50), and a circuit‑breaker tester.

Which HS codes are associated with the supplier’s products?

Three products carry HS codes: New Vlf‑60 Ac Hipot is classified under 9030.39, Low Frequency Generator Lfg‑50 under 8543.70, and the Circuit Breaker Tester under 9030.32. The remaining items fall within the broader HS 9030 testing‑equipment chapter.

What standards should buyers verify for the high‑voltage test systems?

Buyers should request compliance with IEC 60060 for high‑voltage measurements and IEC 60587 for insulating oil testing, along with any CE or IEC type‑approval certificates that accompany the equipment.

Are sample units or test reports available before placing an order?

Suppliers typically provide calibration certificates, type‑approval documents, and, on request, a functional sample or video demonstration to verify performance specifications such as voltage range and frequency.

What are the typical packaging and shipping methods for these devices?

Items are packed in steel‑reinforced crates with foam padding, loaded on wooden pallets, and shipped in 20‑ft or 40‑ft containers using FOB or CIF terms, complying with standard maritime handling requirements.

What documentation is required for customs clearance of these products?

Customs usually require a commercial invoice, packing list, certificate of origin, and any applicable IEC calibration or CE conformity certificates that match the HS code declared on the invoice.

What is the usual lead time and minimum order quantity for a single unit?

Lead times are generally four to eight weeks from order confirmation, and the minimum order quantity is one unit per model, subject to availability of calibration and certification documents.