About Jm Solutions - Labels, Stickers, Logos Supplier in Canada

Canada lists Jm Solutions as a supplier with an active product count of 5. The catalogue includes a Metallic Sticker, a Steel Wool product classified under HS code 7323.10 and described as low‑carbon mild steel (C1008/C1010) in a galvanized finish, a Green Pad, a Spray Bottle, and a Table Planner. The top categories reported are Labels, Stickers, Logos; Steel; Wiping Rags, Mops, Dusters, Sponge, Brushes, Scourer; Plastic Bottles & Sealings; and Canned Vegetables. Each product is presented without price information, focusing on material composition where provided. The supplier is tagged with a "harbor" trust tier, indicating a moderate level of verification in the platform.

Product Range and Specialties of Jm Solutions

The listed items cover three distinct material groups: printed adhesive media (Metallic Sticker), metal cleaning products (Steel Wool), and assorted polymer or paper based consumables (Green Pad, Spray Bottle, Table Planner). In the label and sticker market, typical grades include polyester or vinyl substrates with thicknesses from 0.07 mm to 0.15 mm and adhesives ranging from permanent acrylic to removable rubber. Steel wool is commonly offered in grades 0 (extra fine) to 3 (coarse) and may be coated to improve corrosion resistance, matching the low‑carbon mild steel description. Cleaning pads such as the Green Pad are usually cellulose or non‑woven synthetic fibers, often quantified by GSM (150‑250 g/m²) and moisture content below 8 %. Spray bottles are generally made from PET or HDPE, with capacities from 250 ml to 2 L and thread standards of 28‑400 or 38‑400 for sealing. Table planners are paper‑based office supplies, typically sized A4 and printed with eco‑friendly inks.

Trade and Export Information - Jm Solutions

Canada exports adhesive printed media, steel cleaning products and polymer containers primarily to the United States, the European Union and selected Asian markets. HS chapter 73 (including 7323.10 for steel wool) is subject to customs duties that vary by destination, while HS chapter 39 covers plastic bottles and HS chapter 96 covers printed stationery. Buyers in the food packaging sector often request REACH compliance and, where the product contacts food, FDA or CFIA food‑contact approvals. Steel wool used in industrial cleaning is frequently required to meet ISO 9001 quality management audits and to provide a Material Safety Data Sheet (MSDS) confirming low‑lead content. Shipping of bulk steel wool typically uses 20‑ft containers with a net weight around 1 ton per container, whereas lightweight items such as stickers and pads are shipped in cartons on palletized loads.

Sourcing from Jm Solutions - Buyer Guidance

When sourcing the Metallic Sticker, request a sample to verify print registration, adhesive shear strength (typically >150 N) and thickness tolerance. For the Steel Wool, ask for an MSDS, test report on tensile strength (often 200‑350 MPa for the steel grade) and confirmation of the galvanized coating thickness (minimum 10 µm). The Green Pad should be accompanied by a paper‑type specification sheet indicating GSM, moisture content and any anti‑static treatment. For the Spray Bottle, request a declaration of the polymer grade (e.g., PET #1) and a seal integrity test report, especially if the bottle will hold chemicals. Confirm packaging dimensions (e.g., 40 × 30 × 20 cm cartons for stickers, 1 m³ pallets for steel wool) and the preferred Incoterm such as CIF or FOB.

What types of stickers does Jm Solutions offer?

The catalogue lists a Metallic Sticker produced on a printable substrate; typical industry grades are polyester or vinyl with a thickness of 0.1 mm and an acrylic adhesive.

Is the Steel Wool product coated?

The product description specifies a galvanized finish on low‑carbon mild steel (C1008/C1010); buyers usually request confirmation of coating thickness and a corrosion resistance test.

Which HS code applies to the steel product?

The Steel Wool is classified under HS code 7323.10, covering steel wool of iron or steel.

Can I obtain a sample of the Green Pad?

Samples are commonly provided for cleaning pads; request a 10 × 10 cm swatch to assess fiber density, GSM and moisture level.

What certifications should I verify for the Spray Bottle?

Typical requirements include REACH registration for the plastic material and, if the bottle is for food use, a CFIA or FDA food‑contact approval.

What are the usual MOQ and lead time for the Table Planner?

Office stationery like Table Planners is often ordered in multiples of 1 000 sheets, with a standard lead time of 3‑4 weeks from order confirmation.

How are the products packaged for export?

Stickers and pads are packed in cardboard cartons on standard Euro pallets; steel wool is shipped in bulk bags or sealed drums, all within 20‑ft or 40‑ft containers.

Which Incoterms are commonly used for these goods?

Exporters from Canada typically quote FOB or CIF terms, allowing buyers to arrange freight and insurance as needed.