About Jiacheng Metal Button Co., Ltd. - Tin Plate Supplier in China

Jiacheng Metal Button Co., Ltd. is based in China and currently lists five distinct metal products in its online catalogue. The catalogue covers eyelets, prong buttons, two tin‑plate packaging items, and a brass snap button, each classified under the supplier’s top categories of Tin Plate, Buttons (Tailoring Material) and Packaging Items & Containers. The tin‑plate craft box is recorded with HS code 7210.11 and is made from tempered tin‑coated steel, while the snap button carries HS code 9606.21 and is produced from brass with a typical Cu 58‑62 % composition. The remaining items - eyelet, prong button and tinplate packing box - are listed without specific HS codes in the source data. All five items are presented as separate product entries.

The eyelet and prong button are typical tailoring hardware, usually supplied in diameters from 3 mm to 10 mm and finished with plating or polishing to meet garment industry standards. Tinplate craft boxes and packing boxes are commonly used for premium packaging, often fabricated from 0.2 mm or thicker tin‑coated steel sheets that satisfy the mechanical strength requirements of the 7210.11 tariff heading. Brass snap buttons under HS 9606.21 are generally produced to meet CE and RoES compliance for lead content, with brass alloys falling within the 58‑62 % copper range. Buyers typically request material certificates, dimensional drawings and, where applicable, test reports for tensile strength, corrosion resistance and plating thickness.

Product Range and Specialties of Jiacheng Metal Button Co., Ltd.

The supplier’s catalogue contains eyelets, prong buttons, a tinplate craft box (HS 7210.11, tempered tin‑coated steel), a brass snap button (HS 9606.21) and a tinplate packing box. In the metal‑hardware market eyelets and buttons are offered in standard diameters of 3 mm‑10 mm, with finishes such as nickel plating, zinc coating or polished brass to meet garment and accessory specifications. Tinplate packaging items are typically produced from sheets meeting the 0.2 mm‑0.3 mm thickness range, with a tin coating of around 0.5 % by weight, conforming to the specifications of HS chapter 72.1. Brass snap buttons are usually manufactured from alloy Cu 58‑62 % Zn 37‑41 % and are tested against ASTM B20 for mechanical properties and lead‑content limits mandated by RoHS. Buyers often look for ISO 9001‑certified production lines, material composition certificates and surface‑finish inspection reports for these categories.

Trade and Export Information - Jiacheng Metal Button Co., Ltd.

China is a major exporter of metal fasteners and tin‑plate packaging, with shipments frequently destined for garment manufacturers in South‑East Asia, packaging firms in Europe and consumer‑goods assemblers in North America. The HS code 7210.11 places the tinplate craft and packing boxes in the “tin‑coated steel” tariff line, which commonly requires a certificate of origin and, for certain markets, compliance with EU REACH or US FDA regulations for food‑contact packaging. The brass snap button falls under HS 9606.21, a heading that often triggers requests for CE Declaration of Conformity and RoHS compliance, especially when the end product is an electronic device or a child‑care item. Export logistics typically involve 20‑ft or 40‑ft containers; a standard 20‑ft container can hold roughly 1,200 tinplate boxes or 15,000 small buttons, packed in cardboard cartons with internal dividers. Common Incoterms used by Chinese metal component exporters include FOB Shanghai or CIF Hong Kong, depending on the buyer’s preference for freight handling.

Sourcing from Jiacheng Metal Button Co., Ltd. - Buyer Guidance

When sourcing eyelets, prong buttons or snap buttons from this supplier, buyers should request a full material test report indicating alloy composition, hardness (e.g., Brinell 80‑120 for brass) and plating thickness where applicable. For the tinplate craft and packing boxes, a coating thickness report (typically 0.5 % tin by weight) and a tensile‑strength test (minimum 250 MPa for 0.2 mm sheet) are standard verification documents. Buyers are advised to confirm that the supplier can provide ISO 9001 certification, CE and RoHS statements for brass items, and a certificate of origin for customs clearance. Typical minimum order quantities range from 5,000 pieces for eyelets or buttons to 500 units for tinplate boxes, with lead times of 20‑30 days after order confirmation, subject to material availability.

What product categories are listed by Jiacheng Metal Button Co., Ltd.?

The catalogue includes eyelets, prong buttons, a tinplate craft box, a brass snap button and a tinplate packing box, covering the categories Tin Plate, Buttons (Tailoring Material) and Packaging Items & Containers.

Which HS codes apply to the tinplate craft box and the snap button?

The tinplate craft box is classified under HS code 7210.11 for tempered tin‑coated steel sheets, while the snap button falls under HS code 9606.21 for base‑metal buttons and press studs.

What material composition is typical for the brass snap button?

Brass snap buttons are usually made from an alloy containing 58‑62 % copper and 37‑41 % zinc, with trace elements limited to meet RoHS lead‑content limits.

Which certifications are commonly required for metal buttons and tinplate packaging?

Buyers often request ISO 9001 quality‑management certification, CE marking for safety, RoHS compliance for lead‑free brass, and a certificate of origin for customs. REACH compliance may be needed for European markets.

How are the tinplate boxes typically packaged for shipment?

Tinplate boxes are normally packed in double‑wall cardboard cartons, stacked on pallets, and secured with stretch‑film. For container loading, pallets are arranged to maximize the use of a 20‑ft or 40‑ft container.

What are typical minimum order quantities and lead times for eyelets or buttons?

Minimum order quantities are generally around 5,000 pieces per style for eyelets and buttons. Lead times after order confirmation are usually 20‑30 days, depending on material stock and finish requirements.

What test reports should a buyer request for the tinplate packaging items?

Buyers should ask for a coating thickness report (tin layer around 0.5 % by weight) and a tensile‑strength test (minimum 250 MPa for 0.2 mm sheet) to verify compliance with HS 7210.11 specifications.

What documentation is needed to clear customs for these metal products?

A certificate of origin, commercial invoice, packing list and, where applicable, CE/ROHS declarations and material safety data sheets are standard documents for customs clearance of metal fasteners and tinplate packaging.