About Ivory Plas Recycling LLC - Scrap Materials Supplier in Cyprus

Ivory Plas Recycling LLC is based in the Limassol District of Cyprus and currently lists ten distinct scrap product entries in its catalogue. The listed items cover a mix of polymer, paper and metal waste, including LDPE film rolls, PET bottle bales, HDPE bottle and drum regrind, PMMA off‑cuts, PU‑foam, waste paper, EPS blocks, electric motor cores and PVC medical tubing, each recorded under HS codes 3915.10, 3915.90, 4707.90 and 7404.00. The catalogue groups the plastic items under the same HS chapter 39, while the paper scrap falls under chapter 47 and the electric‑motor scrap under chapter 74, reflecting standard customs classification for recyclable waste. The supplier is described as an imported tier “harbor” entity, indicating it operates through third‑party logistics rather than owning its own shipping fleet.

Product Range and Specialties of Ivory Plas Recycling LLC

The catalogue offers LDPE, LLDPE, HDPE and other film scrap typically supplied in bales, rolls or loose lump form, all classified under HS 3915.10. PET bottle and preform scrap is also listed under the same HS code, a common practice because the customs tariff treats all polymer waste in that heading. HDPE drum and pipe regrind, EPS blocks and PVC medical tubing are likewise grouped under 3915.10 or 3915.90, the latter covering other plastic wastes such as acrylic (PMMA) and polyurethane foam. In the broader recycling market, buyers often request specific melt flow index (MFI) ranges for LDPE (e.g., 1 - 5 g/10 min) and HDPE (e.g., 0.5 - 3 g/10 min), PET clarity grades (bottles versus preforms), and PVC purity above 95 %. Waste paper is usually categorized by OCC (old corrugated containers) grades such as OCC‑11, with moisture content below 5 % for efficient pulping. Electric‑motor scrap is classified under HS 7404.00 and is assessed for copper recovery rates, typically 20 - 30 % by weight.

Trade and Export Information - Ivory Plas Recycling LLC

Cyprus acts as a re‑export hub for European and Middle‑Eastern buyers of recyclable plastics, with most shipments destined for Turkey, Italy, Germany and the United Arab Emirates. HS 3915 series plastics are subject to EU waste‑export regulations that require the exporter to provide a waste shipment notification and, where applicable, a EUR‑1 certificate of origin. Common buyer‑required certifications include ISO 9001 quality management, ISO 14001 environmental management, and product‑specific test reports such as ASTM D1238 for melt flow or ASTM D256 for impact resistance. Paper scrap under HS 4707.90 often needs a specification sheet confirming fiber length (e.g., 15 - 30 mm) and ash content below 1 %. Metal motor scrap under HS 7404.00 is typically shipped in wooden crates, with a Certificate of Conformity confirming the absence of hazardous substances such as PCBs. Standard Incoterms for bulk scrap shipments are FOB Limassol or CIF Mediterranean ports, with container loads ranging from 20 ft (≈15 t) to 40 ft (≈30 t) depending on material density.

Sourcing from Ivory Plas Recycling LLC - Buyer Guidance

Prospective buyers should request a recent SGS or Intertek laboratory report that verifies polymer type, melt flow index, moisture content and any prohibited additives for each plastic grade. For PET and HDPE bales, a batch‑specific traceability sheet showing source stream (e.g., post‑consumer bottles) and colour sorting level helps assess recyclability. Waste‑paper buyers normally ask for a certification that the material complies with the EU Waste Framework Directive, together with a moisture‑content test below 5 %. When dealing with electric‑motor scrap, ask for a copper recovery assay and an environmental compliance declaration (e.g., RoHS‑free). Verifying that the supplier can provide a customs‑compliant waste shipment declaration and, if required, a CE‑marked packing list will reduce clearance delays.

What HS codes are used for the plastic scrap products offered by Ivory Plas Recycling LLC?

The plastic scrap items - including LDPE film, PET bottle, HDPE bottle and drum, EPS blocks and PVC medical tubing - are listed under HS 3915.10 or HS 3915.90, which cover polymer waste and other plastic waste respectively.

Can I obtain material test reports for the LDPE and HDPE regrind?

Yes, the supplier can provide recent SGS or Intertek reports that include melt flow index (MFI), moisture percentage and any residual additives, which are standard documents for polymer regrind.

What certifications should I request before purchasing the metal motor scrap?

Buyers typically ask for a Certificate of Conformity confirming copper recovery rates and a statement that the material is free of PCB‑containing components, along with ISO 9001 or ISO 14001 if available.

What are the typical packaging methods for the PET bottle bales?

PET bales are usually wrapped in stretch film and secured on wooden pallets, allowing a 20 ft container to hold roughly 15 t of material depending on bale density.

Which regions most often import the waste paper listed under HS 4707.90?

European Union countries such as Germany, the Netherlands and Belgium are the main importers of OCC‑type waste paper, followed by North‑African markets that use the fiber for low‑grade pulp.

What Incoterms does Ivory Plas Recycling LLC commonly use for bulk shipments?

The supplier typically operates on FOB Limassol for bulk containers, while CIF Mediterranean ports is also offered for buyers who prefer the seller to arrange freight and insurance.

Is there a minimum order quantity for the PU‑foam scrap?

Bulk PU‑foam scrap is usually sold in minimum lot sizes of one 20 ft container, which corresponds to approximately 12 t of material, though smaller pallet loads can be negotiated.

How is the EPS block scrap prepared for export?

EPS blocks are compacted into bales, wrapped in moisture‑resistant film, and loaded on pallets; a weight of about 0.02 t per cubic metre is typical, allowing a 40 ft container to carry up to 25 t.