About Metais Jaime Dias S.A. - Scrap Materials Supplier in Portugal

Portugal‑based Metais Jaime Dias S.A. lists fifteen active product lines covering a broad mix of plastic and metal scrap. The catalogue groups items under top categories such as Plastic Scrap, Metal Scraps, Stainless Steel Scrap, Waste Paper, Aluminum Scrap, Steel Scraps and Steel Scrap, reflecting the typical segmentation used by European recyclers. Each entry is identified by material type and, where applicable, an HS‑code that aligns with international customs classifications. The supplier’s portfolio therefore spans both ferrous and non‑ferrous streams as well as assorted polymer residues.

The detailed product list includes Steel Scrap, Shredded (HS 7204.49, ferrous shredded steel, ISRI 211), Aluminum 6063 Scrap, PP Mix Plastic Scrap, Plastic Colored Containers Shredded, PP Bumpers Scrap, Stainless Steel Scrap, Paper Scrap, Aluminum Painted Profile Scrap (HS 7602.00, painted aluminum alloy 95‑98 % metal), Zorba Scrap (HS 7602.00, mixed non‑ferrous with 55‑75 % Al, 15‑30 % Zn, 5‑20 % Mg/Cu), PEHD Plastic Scrap, Exturded Plastic Scrap, Shredded Steel Scrap (HS 7204.49), Plastic PE Film Scrap, Zorba Metal Scrap (HS 7204.29, mixed non‑ferrous) and a second entry for Steel Scrap, Shredded (HS 7204.49).

Product Range and Specialties of Metais Jaime Dias S.A.

The catalogue reflects common European scrap streams. Shredded steel scrap is typically graded to ISRI 211 specifications, with particle sizes between 5 mm and 50 mm and a ferrous content above 95 %. Aluminum 6063 scrap corresponds to the alloy used in extrusion profiles and is usually accepted with a minimum aluminium purity of 94 %. Zorba mixes, identified under HS 7602 and 7204, are standard feedstock for secondary aluminium smelters and are expected to contain 55‑75 % aluminium, 15‑30 % zinc and trace copper or magnesium. Polypropylene (PP) mixes and PEHD (high‑density polyethylene) are graded by melt flow index (MFI) and colour consistency, with typical MFI values from 2 to 20 g/10 min. Waste paper grades are classified by basis weight (gsm) and fibre content, often supplied in bales of 1‑2 tonne. All items are generally supplied in bulk bales or loose bulk, packed on pallets for container loading.

Trade and Export Information - Metais Jaime Dias S.A.

Portugal’s recycling sector supplies scrap to major import markets in Western Europe, the Middle East and East Asia. Ferrous scrap under HS 7204 (including 7204.49 and 7204.29) is most frequently shipped to steel mills in Spain, Italy, Turkey and China, where it is melted in electric arc furnaces. Non‑ferrous scrap classified under HS 7602 is a key feedstock for aluminium smelters in the Netherlands, Germany and the United Arab Emirates. Buyers usually request ISO 9001 quality‑management certificates, REACH compliance for hazardous substances, and where applicable, CE marking for recycled plastics. Standard logistics involve 20‑foot or 40‑foot containers, with steel or aluminium bales secured by steel strapping; Incoterms such as FOB Lisbon or CIF Dubai are common. Export documentation typically includes a commercial invoice, packing list, material analysis certificate and, for metal grades, a heat‑treatment or alloy certification if required by the destination mill.

Sourcing from Metais Jaime Dias S.A. - Buyer Guidance

When sourcing from Metais Jaime Dias S.A., buyers should ask for a recent material analysis report that specifies elemental composition for metal grades and polymer type, melt flow index for plastics, and moisture content for paper. Request confirmation of the HS code used for customs clearance and any existing ISO 9001 or REACH compliance certificates; absence of these should be clarified before contract signing. Typical minimum order quantities for bulk scrap range from 5 tonnes for shredded steel to 10 tonnes for aluminium Zorba, with lead times of 2‑4 weeks after order confirmation, depending on container availability and export clearance procedures.

What HS codes are used for the metal scrap items?

Ferrous shredded steel scrap is listed under HS 7204.49, while mixed non‑ferrous Zorba metal scrap uses HS 7204.29. Aluminum painted profile and general Zorba mixes fall under HS 7602.00.

Which certifications should I verify before purchasing?

Buyers normally request ISO 9001 for quality management, REACH compliance for hazardous substances, and any alloy‑specific certificates for aluminium grades. Plastic grades may also require REACH or CE documentation.

What are the typical grades for the steel scrap offered?

The shredded steel scrap aligns with ISRI 211, meaning a ferrous content above 95 % and particle sizes between 5 mm and 50 mm. It is supplied as bulk bales suitable for electric‑arc furnace feedstock.

How is the Zorba scrap composition defined?

Zorba Scrap under HS 7602.00 contains 55‑75 % aluminium, 15‑30 % zinc, and 5‑20 % magnesium and copper combined. This composition is standard for secondary aluminium melting.

What packaging format is used for the plastic scrap?

Plastic scrap such as PP Mix, PEHD and coloured container fragments is typically baled or packed in bulk sacks, secured on pallets for 20‑foot or 40‑foot container loading.

What are the common export destinations for Portuguese scrap?

Key destinations include steel mills in Spain, Italy and Turkey, aluminium smelters in the Netherlands, Germany and the UAE, and plastic recyclers in the United Kingdom and South Korea.

What documentation accompanies a shipment?

Standard export documents include a commercial invoice, packing list, material analysis certificate, HS‑code declaration, and any applicable ISO or REACH certificates.

What are the typical minimum order quantities and lead times?

Minimum orders are usually 5 tonnes for shredded steel and 10 tonnes for aluminium Zorba, with a lead time of 2‑4 weeks after order confirmation, subject to container availability.