About Idst Nozzle Co., Ltd. - Nozzle Supplier in China

Idst Nozzle Co., Ltd. is based in China and lists five active products in its catalogue. The company focuses on nozzle‑type equipment used in irrigation and fluid distribution, covering spray, fog, mist, spiral and a generic nozzle model. Each product is identified by its functional type rather than a specific model number, and all fall under the broader HS chapter 84 machinery classification used for hydraulic and spray devices. The catalogue does not provide HS‑code details, so buyers should verify the exact code during order processing. The supplier is classified as an imported tier with a harbor trust rating, indicating it operates through established trade channels in China.

The five listed items reflect common nozzle categories employed in agricultural irrigation, fire‑suppression systems and misting applications. Idst Nozzle Co., Ltd. does not disclose certifications such as ISO or CE, so buyers typically request conformity documentation before shipment. The product set is limited to mechanical nozzles without electronic controls, suggesting a focus on basic hydraulic components rather than advanced smart irrigation devices.

Product Range and Specialties of Idst Nozzle Co., Ltd.

The catalogue offers spray nozzles, fog nozzles, mist nozzles, spiral nozzles and a generic nozzle entry. In the irrigation industry, spray nozzles are usually rated between 0.5 L/min and 12 L/min with pressure tolerances up to 1.5 MPa, while fog and mist nozzles operate at finer droplet sizes (10‑30 µm) for humidification or cooling. Spiral nozzles are often employed for high‑volume, low‑pressure distribution, typically fabricated from stainless steel AISI 304 or brass CuZn 39. Common material grades for these devices include stainless steel (corrosion‑resistant), brass (machinable), and high‑density polyethylene (HDPE) for lightweight plastic variants. Buyers should expect standard dimensions such as thread sizes M12‑M24 and inlet/outlet connections compatible with ½‑inch to 1‑inch hoses.

Industry standards for irrigation nozzles reference ISO 9001 quality management, EN 13330 for water‑spraying equipment, and ASTM A240 for stainless steel components. While Idst Nozzle Co., Ltd. does not list certifications, the products fall within the typical specification envelope of 0.2‑1.5 MPa operating pressure, 0‑10 mm orifice diameter, and flow coefficients (Cv) ranging from 0.2 to 2.5.

Trade and Export Information - Idst Nozzle Co., Ltd.

China is a major exporter of irrigation hardware, with the majority of nozzle shipments destined for Southeast Asia, the Middle East, Africa and Latin America. HS chapter 84‑90 (sprinklers, spray nozzles and related parts) governs customs duties for these items, and many importers require a commercial invoice, packing list and a test report confirming flow rate and pressure rating. Common certifications requested by overseas buyers include ISO 9001, CE marking for EU markets, and compliance with local agricultural standards such as India’s BIS or Saudi Arabia’s SASO. Packaging is typically in wooden crates or 20‑ft containers, with each crate containing 50‑200 units depending on nozzle size and weight (average 2‑5 kg per unit).

Sourcing from Idst Nozzle Co., Ltd. - Buyer Guidance

When sourcing from Idst Nozzle Co., Ltd., buyers should request a product data sheet that lists material grade, nominal flow rate, operating pressure, droplet size range and connection dimensions. A third‑party test report, such as an ISO‑9001‑based flow test or an ASTM‑compliant corrosion test, helps verify performance before bulk purchase. Because the supplier does not disclose existing certifications, buyers are advised to ask for a copy of any ISO or CE certificates that the factory may hold, and to confirm that the nozzles meet the target market’s regulatory standards. Verify packaging details (crate dimensions, wood treatment according to ISPM 15) and confirm the Incoterm (often FOB Shanghai or CIF destination) to avoid unexpected freight charges.

Typical minimum order quantities for basic hydraulic nozzles range from 500 to 2 000 pieces, with lead times of 20‑35 days after order confirmation and receipt of a pro‑forma invoice. Samples are usually offered in small packs (5‑10 units) for flow‑rate testing, and buyers should request a sample with the exact material and size they intend to order to validate compatibility with their irrigation system.

What types of nozzles does Idst Nozzle Co., Ltd. list in its catalogue?

The catalogue includes spray nozzles, fog nozzles, mist nozzles, spiral nozzles and a generic nozzle entry, all intended for irrigation or fluid‑distribution applications.

Which material grades are typical for the listed nozzles?

Industry practice uses stainless steel (AISI 304), brass (CuZn 39) and HDPE plastic for these nozzle types, providing corrosion resistance and durability.

What HS code family do these products fall under?

Nozzle products are generally classified under HS chapter 84, specifically sub‑heading 8424‑90 for spray nozzles and related parts.

Are there any certifications I should request from the supplier?

Since the supplier does not list certifications, buyers should ask for ISO 9001 quality‑management certification, CE marking for EU shipments, or any local compliance certificates required by the destination market.

What is a typical MOQ and lead time for these nozzles?

Minimum order quantities usually start at 500 units, with a production lead time of 20‑35 days after order confirmation and payment of the pro‑forma invoice.

How are the nozzles packaged for export?

Export shipments are commonly packed in wooden crates or pallets, complying with ISPM 15 wood‑treatment standards, and loaded into 20‑ft or 40‑ft containers depending on order volume.

What documentation should I expect with the shipment?

Standard export documents include a commercial invoice, packing list, bill of lading, and, if requested, a test report confirming flow rate and pressure specifications.

Which regions commonly import Chinese irrigation nozzles?

Major import regions include Southeast Asia, the Middle East, Africa and Latin America, where agricultural and landscape irrigation projects drive demand.