About Horen Industrial Co., Ltd.Horen Industrial Co., Ltd. - Industrial Tubes Supplier in Taiwan

Based in the Dajia Youth Industrial Park of Taichung, Taiwan, Horen Industrial Co., Ltd.Horen Industrial Co., Ltd. lists nine active products in its catalogue. The portfolio focuses on cold‑working machinery for metal tubes and bars, including Swaging Machine‑SM03, Tube Drawing Machine‑SA50B, Pipe Drawing Machine‑SA75B, Drawbench‑HS200, Auto Cold Drawing Machine‑HS300, Wire Straightening Machine‑ST0314, Pipe Straightening Machine‑ST1514N, Rotary Swager‑SM01 and Round Bar Straightening Machine‑ST1014N. These items are recorded under HS codes 8462.29, 8462.21, 8479.40, 8462.11 and 8455.21, which belong to the machinery chapters of the Harmonised System. The catalogue indicates construction materials such as carbon steel, cast iron, alloy steel, brass and aluminium.

The listed machines cover the full cold‑forming process chain, from initial swaging and taper forming to precision drawing and straightening of wires, tubes and bars. Each unit is described with its primary material composition, for example the Pipe Drawing Machine uses a carbon‑steel frame with precision‑hardened dies, while the Drawbench incorporates a 30 HP electric motor. The product set reflects typical Taiwanese metal‑working equipment design, emphasizing modularity and compatibility with standard tube diameters ranging from 6 mm to 150 mm.

Product Range and Specialties of Horen Industrial Co., Ltd.Horen Industrial Co., Ltd.

Within the catalogue Horen supplies swaging, drawing, taper‑forming and straightening machines that are commonly used to produce cold‑drawn tubes and bars to standards such as ASTM A53, A106 or ISO 11960. Typical grades processed include carbon‑steel grades (e.g., ASTM A36, S235JR), brass (C260), aluminium alloys (6061) and stainless steels (304, 316). Industry practice calls for reduction ratios of 10‑30 % in swaging, drawing speeds up to 30 m/min, and die hardness of 60‑65 HRC. Machine specifications often list maximum tensile load (e.g., 150 kN for the SM03), motor power (30 HP for the HS200), and positional accuracy within ±0.02 mm, aligning with ISO 2768 tolerance class f.

Trade and Export Information - Horen Industrial Co., Ltd.Horen Industrial Co., Ltd.

Taiwan is a recognized exporter of metal‑working machinery, with the majority of shipments destined for Southeast Asian manufacturers, European automotive suppliers, and North American aerospace firms. HS chapter 84 machinery items such as the Horen swagers (8462.29) and drawing machines (8462.21) are routinely inspected under the WTO‑mandated customs valuation and may require CE marking for EU entry, UL listing for the United States, or ISO 9001 certification as evidence of quality management. Buyers typically arrange FOB Taichung or CIF destination, using 20‑ft or 40‑ft containers with wooden crates and moisture‑absorbing packs to protect precision components during sea transport.

Sourcing from Horen Industrial Co., Ltd.Horen Industrial Co., Ltd. - Buyer Guidance

Prospective buyers should request the supplier’s ISO 9001 certificate, any CE Declaration of Conformity, and test reports confirming load capacity, dimensional accuracy and material hardness for the specific machine model. Verifying the HS code on the commercial invoice against the product description helps avoid customs delays. Standard due diligence includes reviewing engineering drawings, confirming the required power supply (e.g., 380 V three‑phase), and agreeing on a minimum order of one unit with a typical lead time of 6‑8 weeks for standard configurations.

What cold‑working machines are included in Horen’s product line?

The catalogue lists nine machines, such as Swaging Machine‑SM03, Tube Drawing Machine‑SA50B, Pipe Drawing Machine‑SA75B, Drawbench‑HS200, Auto Cold Drawing Machine‑HS300, Wire Straightening Machine‑ST0314, Pipe Straightening Machine‑ST1514N, Rotary Swager‑SM01 and Round Bar Straightening Machine‑ST1014N. Each is designed for processing carbon steel, brass, aluminium or alloy workpieces.

Which HS codes correspond to the swaging and drawing equipment?

Swaging machines (SM03, SM01) are classified under HS 8462.29 and 8462.11 respectively, while tube and pipe drawing machines fall under HS 8462.21 and 8479.40. These codes belong to the machinery chapter of the Harmonised System.

What materials are used in the construction of Horen’s machines?

The machines employ carbon steel and cast iron for structural frames, alloy steel for high‑stress components, and brass or aluminium for specific parts such as dies and workpiece holders. This combination provides durability and resistance to wear in cold‑working operations.

Which certifications are typically required for importing these machines?

Importers usually request ISO 9001 quality‑management certification, CE marking for European markets, and UL or CSA listings for North America. Additional test reports on load capacity and dimensional tolerance are often demanded by buyers.

What is the usual lead time and minimum order quantity?

Standard models are produced on a make‑to‑stock basis with a lead time of approximately 6‑8 weeks from order confirmation. The minimum order is typically one complete machine unit, as each item is a standalone piece of equipment.

How are the machines packaged for export?

Horen ships the equipment in wooden crates fitted with steel braces, placed inside 20‑ft or 40‑ft containers. Protective padding and desiccants are included to safeguard precision components against vibration and moisture.

Which regions are the main importers of Taiwanese metal‑working machinery?

Major destinations include Southeast Asian countries such as Vietnam and Thailand, European nations like Germany and Italy, and North American markets in the United States and Canada. These regions import the machinery for automotive, aerospace and general manufacturing applications.

How can a buyer request technical specifications or a sample?

Buyers should contact the supplier through the platform’s messaging system, specifying the machine model and requesting the latest engineering data sheet, ISO 9001 certificate and any available performance test reports. Samples of component materials or small‑scale trial runs are often arranged after a non‑binding quotation is issued.