About JinTongGuang Machinery (Dalian) Co., Ltd - Food Processing Machinery Supplier in China

Dalian, Liaoning province in China hosts JinTongGuang Machinery (Dalian) Co., Ltd, which currently lists nine active products in its catalogue. The company’s catalogue focuses on food and fish processing machinery, including fish belly splitting machines, fish back splitting machines, fish fillet cutting machines, and various squid cutting machines. Each product is identified with an HS‑code in the 8438 series, which covers “Machinery for making food or drink; other food processing machinery”, and a material specification that predominantly cites stainless steel grades 304 or 316L. The firm also offers a machine described under HS 8479.89 that integrates steel and plastic processing mechanisms for squid flower shaping.

The supplier reports exports to more than 30 countries, among them Malaysia, Indonesia, Japan, South Korea, Ecuador, Vietnam, India, Russia, Peru, Argentina, Brazil, Australia and New Zealand. All spare‑parts such as knives and saw blades are sourced from the United States, indicating a reliance on imported high‑precision components. The product list reflects a focus on both fish and squid processing lines, with a secondary mention of plastic processing mechanisms used in specialty cutting equipment.

Product Range and Specialties of JinTongGuang Machinery (Dalian) Co., Ltd

The catalogue comprises three fish‑related machines classified under HS 8438.50 (fish belly splitting, fish fillet cutting, squid flower cutting) and four machines under HS 8438.80 (fish back splitting, fish skin remover, fish skin peeling, squid cutting flower). Materials are consistently described as food‑grade stainless steel 304, with occasional use of stainless steel 316L for higher corrosion resistance, and carbon‑steel frames for structural strength. In the broader industry, fish‑processing equipment is typically built to meet hygienic design standards such as 3‑A Sanitary Standards, with surface roughness below 0.8 µm and corrosion resistance to saline environments. Common performance metrics include cutting speed (up to 30 m min‑¹), blade change time under 5 minutes, and compliance with FDA Food Contact Material regulations.

Industry‑wide, machinery in the 8438 HS chapter often adheres to ISO 9001 quality management and may obtain CE marking for European markets. Buyers frequently request specifications on motor power (typically 0.75 - 2 kW for small‑scale units), food‑grade lubricant compatibility, and the ability to integrate with conveyor systems. The squid‑flower machine listed under HS 8479.89 reflects a hybrid design where plastic processing components are combined with steel frames, a configuration that is common in specialty shape‑forming equipment for premium seafood products.

Trade and Export Information - JinTongGuang Machinery (Dalian) Co., Ltd

China is a major exporter of food‑processing machinery, with the 8438 HS chapter accounting for a significant share of global shipments. Buyers in Southeast Asia, Europe, and South America regularly import such equipment for seafood processing plants, aquaculture facilities, and value‑added fish product manufacturers. Typical import documentation includes a commercial invoice, packing list, certificate of origin, and where required, CE or FDA conformity certificates. Shipping is usually arranged in 20‑ft or 40‑ft containers, with machines packed in wooden crates, metal pallets, or a combination of both to protect stainless‑steel components during sea transit.

Customs authorities in destination countries often inspect the HS code declaration and may require a pre‑shipment inspection (PSI) for machinery exceeding a certain value threshold. Buyers should anticipate Incoterms such as CIF or FOB, with the supplier specifying the port of loading in Tianjin or Dalian. Chinese exporters of fish‑processing machinery commonly work with freight forwarders experienced in handling oversized cargo, ensuring compliance with weight limits (typically 22 t per 40‑ft container) and securing proper lashing.

Sourcing from JinTongGuang Machinery (Dalian) Co., Ltd - Buyer Guidance

When sourcing these machines, buyers should request a detailed specification sheet that lists the stainless‑steel grade, motor power, blade type, and any food‑grade lubricant certifications. Test reports confirming compliance with 3‑A sanitary standards, ISO 9001 audit summaries, and, where applicable, CE or FDA conformity documentation are standard verification items. Because spare parts are imported from the United States, buyers may also ask for part numbers and warranty terms to confirm long‑term serviceability.

It is advisable to arrange a pre‑shipment sample or a factory visit to verify build quality, especially the finish of stainless‑steel surfaces and the alignment of cutting blades. Buyers should also confirm the packaging configuration (crate dimensions, palletization) and the expected lead time, which for custom‑built fish or squid processing lines typically ranges from 8 to 12 weeks after order confirmation.

What HS code is used for the fish belly splitting machine?

The fish belly splitting machine is classified under HS code 8438.50, which covers machinery for making food or drink and other food processing machinery.

Which material grades are typical for the fish processing machines?

The machines are built primarily from food‑grade stainless steel 304, with some models offering stainless steel 316L for higher corrosion resistance, and carbon‑steel frames for structural components.

What certifications should a buyer request for these machines?

Buyers should request ISO 9001 quality management certification, 3‑A sanitary compliance reports, and, if the destination market requires, CE marking or FDA food‑contact material approval.

What is the usual minimum order quantity for a single machine?

The typical minimum order is one complete unit, as each machine is a custom‑engineered piece of equipment.

What lead time can a buyer expect after placing an order?

Lead times generally range from 8 to 12 weeks, depending on the specific model, any custom options, and the availability of imported spare‑part components.

How are the machines packaged for export?

Machines are usually packed in reinforced wooden crates, secured on steel or wooden pallets, and loaded into 20‑ft or 40‑ft containers to protect the stainless‑steel components during sea freight.

Which regions commonly import Chinese fish processing machinery?

Key import regions include Southeast Asia (Malaysia, Indonesia, Vietnam), Europe, and South America (Brazil, Argentina, Peru), where the equipment is used in seafood processing and aquaculture operations.

What documentation is required for customs clearance?

Customs typically requires a commercial invoice, packing list, certificate of origin, and any applicable certification such as CE or FDA approval, along with the HS code declaration.