About Ho Chung Co. Ltd. - Plastic Items Supplier in Taiwan

Ho Chung Co. Ltd. is based in Taiwan and currently lists ten active products in its catalogue. The supplier is classified under the “Other - Fabric and Raw Material” and “Plastic Items” categories. Its product portfolio covers both polymer recyclates and textile‑related fibers. All items are grouped within the broader plastic and fabric raw‑material segments used by manufacturers worldwide. The catalogue does not include any disclosed certifications, so buyers should verify compliance independently.

Product Range and Specialties of Ho Chung Co. Ltd.

The catalogue includes PET chip, which is typically supplied with a purity of 99 % or higher and measured by melt flow index values between 10 and 30 g/10 min for injection molding. PVC regrind and PC regrind are usually graded by residual chlorine content (below 0.1 % for PVC) and intrinsic viscosity ranges that match the original polymer specifications. Synthetic fibers such as PA carpet, PVA fiber and K nylon film are described in industry terms by denier, tensile strength (often 3 - 5 cN/tex) and elongation at break, allowing buyers to match textile performance standards. PE film and non‑woven fabric are commonly supplied in roll widths of 1 m to 2 m, with thicknesses measured in microns and basis weight (GSM) that align with packaging or filtration requirements.

Trade and Export Information - Ho Chung Co. Ltd.

Taiwan is a recognized exporter of recycled plastics and engineered fibers, with major shipment destinations including mainland China, Southeast Asian countries, the European Union and the United States. Products such as PET chip, PVC regrind and PC regrind fall under HS Chapter 39 (Plastics), while synthetic fibers and non‑woven fabrics are classified in HS Chapters 54 and 55, which are standard for customs clearance of textile raw materials. Importers typically require compliance with REACH registration, ISO 9001 quality‑management systems and, where food contact is intended, FDA or EU food‑contact regulations. Bulk shipments are usually loaded in 20 ft or 40 ft containers, often on pallets or in 1‑ton HDPE drums, and are traded on FOB or CIF terms depending on the buyer’s preference.

Sourcing from Ho Chung Co. Ltd. - Buyer Guidance

Buyers should request material safety data sheets (MSDS), melt flow index or intrinsic viscosity test reports for polymer regrind, and tensile strength, denier and elongation data for synthetic fibers. Verification of REACH registration, ISO 9001 certification and any specific food‑contact approvals is standard practice before confirming an order. Samples are typically provided in sealed bags for granules or on rolled fabric for films, allowing the buyer to run independent laboratory tests prior to full‑scale procurement.

What types of plastic materials does Ho Chung Co. Ltd. supply?

The catalogue lists PET chip, PVC regrind, PC regrind, PE film and assorted plastic waste, all of which are common feedstocks for recycling and reprocessing operations.

Are the synthetic fibers compliant with standard textile specifications?

Buyers should request test reports that detail denier, tensile strength and elongation, which are the usual parameters used to verify compliance for PA carpet, PVA fiber and K nylon film.

Which certifications are typically needed for these plastic and fiber products?

Importers usually ask for REACH registration, ISO 9001 quality‑system certification and, when relevant, FDA or EU food‑contact approval; Ho Chung Co. Ltd. can provide any certificates it holds upon request.

What packaging formats are used for bulk shipments?

Bulk polymer regrind and PET chip are often packed in 1‑ton HDPE drums or bulk bags, while films and non‑woven fabrics are rolled on cores, palletised and loaded into standard 20 ft containers.

What is the typical lead time for an order?

Lead times vary by product; standard regrind orders generally require 15 days, whereas custom‑spec synthetic fibers may need up to 30 days from order confirmation.

How can a buyer obtain a sample?

Samples of PET chip, PVC regrind or fabric swatches can be requested in small quantities; the supplier ships them in sealed bags or rolled fabric together with the relevant test data.

What HS code chapters do these products fall under?

Most listed items belong to HS Chapter 39 for plastics and Chapters 54 - 55 for synthetic fibers and non‑woven fabrics, which are the typical classification groups used by customs authorities.

Are there any minimum order quantities?

Minimum order quantities differ by product; bulk regrind usually starts at 500 kg, while specialty films or fibers often require a minimum of 1 ton per order.