About Hanover Resource Recovery Corporation - Wire & Cable Harness, Wire Mesh Supplier in United States

The supplier is based in the United States and currently lists six active products across four broad categories: wire and cable harnesses, air‑conditioner components, copper scrap and mixed metal scrap. The catalogue includes insulated copper harness wire, two items identified as “Taint tabor” and “Talk”, cast aluminium, copper scrap and a mixed non‑ferrous scrap known as Zorba. Each of the scrap entries is recorded under HS code 7404.00, the standard chapter for copper and copper alloy waste. The copper scrap entry specifies insulated copper wire scrap with a 60 % copper recovery rate, while Zorba is described as mixed non‑ferrous metal scrap containing roughly 4 % copper together with precious and base metals. The product list therefore covers both finished wire assemblies and raw secondary metal materials suitable for melting and re‑processing.

In the wire‑related segment the company offers insulated copper harness wire, a product typically supplied in gauges ranging from 0.5 mm² to 2.5 mm² and insulated with PVC or silicone to meet IEC 60364 and UL 758 standards. The cast aluminium item is likely a raw or semi‑finished alloy used for extrusion or machining, commonly falling under ASTM B209 specifications for aluminium sheet and plate. Copper scrap and Zorba are both classified under HS 7404.00, a tariff line that requires documentation of material composition and recovery rates for customs clearance. The inclusion of air‑conditioner parts, although not detailed, suggests additional components that may be subject to IEC 60335 safety standards. Overall, the catalogue reflects a mix of finished electrical components and recyclable metal streams that are typical in secondary‑metal trade.

Product Range and Specialties of Hanover Resource Recovery Corporation

Hanover Resource Recovery Corporation’s catalogue lists insulated copper harness wire, cast aluminium, copper scrap and Zorba mixed scrap alongside two unspecified items. Insulated copper harness wire is generally produced in standard voltage ratings of 300 V to 600 V, with copper conductors complying with ASTM B170 and insulation meeting IEC 60227 for PVC or IEC 60245 for silicone. Cast aluminium products are usually supplied in standard alloy series (e.g., 3003, 6061) and conform to the mechanical properties defined in ASTM B209, such as tensile strength of 110 - 310 MPa depending on alloy. The copper scrap entry notes a 60 % copper recovery, which aligns with typical secondary‑copper grades ranging from 60 % to 95 % Cu, and buyers often request an assay certificate confirming the exact purity. Zorba, a mixed non‑ferrous scrap, commonly contains 3 - 5 % copper, 1 - 2 % aluminium, and trace precious metals; industry practice is to provide a composition analysis according to ISO 17025 laboratory standards.

Trade and Export Information - Hanover Resource Recovery Corporation

United States exporters of copper and mixed non‑ferrous scraps such as those listed under HS 7404.00 primarily ship to Southeast Asian smelters, European metal recyclers and North‑American downstream processors. Typical importers require material test reports, a declared recovery percentage for copper scrap and a detailed composition breakdown for Zorba to satisfy both customs valuation and environmental compliance under the U.S. Resource Conservation and Recovery Act (RCRA). For cast aluminium, HS 7601.00 is the usual tariff line, and shipments are commonly packed in 20‑ft or 40‑ft containers with wooden pallets, protected by moisture‑resistant film to meet ASTM B209 handling guidelines. Buyers in the automotive, construction and electronics sectors frequently request ISO 9001 certification for the processing facility and REACH compliance documentation for any alloying elements. Standard Incoterms used by U.S. metal exporters include FOB Gulf Coast or CIF Shanghai, with freight forwarding firms handling the required phytosanitary and hazardous‑material declarations where applicable.

Sourcing from Hanover Resource Recovery Corporation - Buyer Guidance

When sourcing insulated copper harness wire from this supplier, request the product data sheet specifying conductor size, insulation type, voltage rating and compliance with IEC 60364 or UL 758. For copper scrap and Zorba, obtain an independent assay report that details copper recovery, impurity levels and the presence of any precious metals, ideally accredited to ISO 17025. Verify that the HS code 7404.00 matches the material description on the commercial invoice and that the supplier can provide a customs‑compliant declaration of origin. Ask for any available ISO 9001 or ISO 14001 certificates to assess the environmental and quality management systems of the recycling operation. Confirm packaging details - typically bulk bags of 1 ton or containerized pallets - and ensure that moisture content is below 1 % for copper scrap to avoid re‑melting penalties.

What types of insulated copper harness wire does Hanover Resource Recovery Corporation list?

The catalogue lists insulated copper harness wire, which is generally supplied in standard gauges from 0.5 mm² to 2.5 mm², insulated with PVC or silicone, and compliant with IEC 60364 and UL 758 safety standards.

Which HS code applies to the copper scrap and Zorba products?

Both copper scrap and Zorba are recorded under HS code 7404.00, the tariff heading for copper and copper alloy waste and mixed non‑ferrous metal scrap.

What material specifications should a buyer request for the cast aluminium item?

Buyers should request the alloy designation (e.g., 3003 or 6061), tensile strength range (110‑310 MPa), and compliance with ASTM B209 for aluminium sheet or plate.

What documentation is typically required for copper scrap shipments?

A material assay report showing copper recovery percentage, impurity levels and any precious‑metal content, along with a customs‑compliant invoice that cites HS 7404.00, is standard.

Are there common certifications buyers look for with metal scrap exporters?

Buyers usually ask for ISO 9001 quality‑management certification, ISO 14001 environmental‑management certification and, where applicable, REACH compliance for alloying elements.

What are typical packaging and container sizes for the listed products?

Copper scrap and Zorba are often packed in bulk bags of 1 ton or stacked on wooden pallets for 20‑ft or 40‑ft containers; cast aluminium typically ships in pallets or crates sized to the product dimensions.

What lead times are typical for these metal products from the United States?

Lead times vary by product but generally range from 2 weeks for bulk copper scrap to 4‑6 weeks for cast aluminium, depending on production scheduling and export documentation.

How can a buyer verify the recovery rate of the insulated copper wire scrap?

The buyer should request an independent laboratory analysis that confirms the 60 % copper recovery claim, with results reported according to ISO 17025 standards.