About Gulf Factory For White Solvent - Petroleum By Products Supplier in Kuwait

Gulf Factory For White Solvent operates from Kuwait and currently lists five distinct products in its catalogue. The portfolio includes furnace oil, white spirit, base oil, heavy fuel oil, and a mineral product classified under HS code 2601.11 as iron ore fines with an iron content of 62 %.

These items are grouped under three supplier‑declared categories: Petroleum By Products, Other Ores & Minerals, and Industrial Chemicals. The petroleum derivatives are standard refinery outputs used as fuel intermediates or lubricant bases, while the mineral entry represents a low‑grade iron ore concentrate commonly supplied to steel producers.

Product Range and Specialties of Gulf Factory For White Solvent

The catalogue shows furnace oil, white spirit, base oil, heavy fuel oil and a mineral iron‑ore fine. In the petroleum sector, furnace oil is typically offered as API 2 grade with a viscosity of 150‑200 cSt at 50 °C, while base oil is supplied in ISO VG grades such as VG‑32, VG‑46 or VG‑68. White spirit is usually a petroleum‑derived solvent with an aromatic content below 30 % and a flash point above 30 °C, and heavy fuel oil is graded by sulfur content, often ranging from 0.5 % to 3.5 % for marine use. The mineral product at 62 % Fe aligns with the low‑grade iron‑ore fines used in sintering or direct‑reduction processes.

Industry practice for these categories includes compliance with ASTM standards (e.g., ASTM D445 for viscosity, ASTM D975 for fuel oil), API specifications for base oils, and REACH registration for chemical solvents. Buyers typically request material safety data sheets (MSDS), assay reports for iron content, and conformity certificates such as ISO 9001 or API 6A when applicable.

Trade and Export Information - Gulf Factory For White Solvent

Kuwait exports a significant share of its refined petroleum by‑products to markets in Asia (China, India, South‑East Asia), Europe and the Middle East, with bulk tanker shipments for fuel oils and containerised drums for solvents. The HS‑code families that apply are 2709 for furnace oil, 2710 for base oil, white spirit and heavy fuel oil, and 2601 for iron‑ore fines. Commonly required certifications include API product specifications, ISO 9001 quality management, and REACH compliance for solvents; buyers often request third‑party test reports (e.g., SGS, Bureau Veritas). Export logistics normally use CIF or FOB terms, 20‑ft or 40‑ft containers for drums, and bulk carriers for large volumes of fuel oil.

Typical buyers of these Kuwaiti exports are power generators, marine fuel suppliers, lubricant manufacturers and steel producers. Packaging standards call for 200 L steel drums for liquids, wooden pallets for bulk bags, and bulk ship loading for heavy fuel oil. Customs inspections frequently verify HS codes, country of origin markings and conformity documents before release.

Sourcing from Gulf Factory For White Solvent - Buyer Guidance

When sourcing from Gulf Factory For White Solvent, request a detailed product data sheet that lists viscosity (cSt), flash point (°C), sulfur or aromatic content and any applicable ASTM or API grades. For the mineral iron‑ore fines, obtain an assay certificate confirming the 62 % Fe content, moisture level and particle size distribution. Buyers should also ask for an up‑to‑date MSDS, ISO 9001 audit summary (if available) and any third‑party laboratory test reports before finalising an order.

Verification of packaging dimensions, drum integrity and container sealing procedures helps avoid damage in transit. Confirm the Incoterm (CIF, FOB) and the preferred loading port in Kuwait (e.g., Mina Al‑Ahmadi) to align logistics planning.

What HS code applies to the mineral product offered by Gulf Factory For White Solvent?

The mineral product is listed under HS code 2601.11 and is described as iron‑ore fines with an iron content of 62 %.

Which standard specifications are relevant for the furnace oil listed in the catalogue?

Furnace oil is typically supplied to meet ASTM D975 fuel oil specifications and API 2 grade, with viscosity values around 150‑200 cSt at 50 °C.

What documentation should a buyer request for the white spirit?

Buyers should request a material safety data sheet (MSDS), a certificate of analysis showing aromatic content below 30 % and flash point above 30 °C, and any REACH registration evidence.

Is there a minimum order quantity (MOQ) for the base oil?

Suppliers of base oil generally set MOQs based on container size; a common minimum is one 20‑ft container (approximately 12‑15 metric tons) unless otherwise negotiated.

What certifications are commonly required for heavy fuel oil exports from Kuwait?

Heavy fuel oil shipments are often required to provide API product specifications, ISO 9001 quality management certificates and third‑party test reports for sulfur content and calorific value.

How is the iron‑ore fine product typically shipped?

Iron‑ore fines are usually packed in bulk bags or jumbo bags for container loading, with HS code 2601.11 customs declarations and moisture test results accompanying the shipment.

What testing should be performed on the base oil before acceptance?

Standard acceptance testing includes viscosity measurement (cSt at 40 °C and 100 °C), flash point determination, and check for contaminants against ASTM D4737.

Which regions most frequently import the petroleum by‑products offered by this supplier?

Key import regions include East Asia (China, India, South‑East Asia), the European Union and the Gulf Cooperation Council states, where these products are used for power generation, marine fuel and lubricant manufacturing.