About Vigo Chemicals FZE - Chemical Raw Materials Supplier in United Arab Emirates

Vigo Chemicals FZE is based in Sharjah, United Arab Emirates and lists 53 active chemical products. The catalogue covers a breadth of industrial chemicals including solvents, esters, glycols, alcohols and specialty plastics additives. Products are classified under HS chapters 29 (Organic chemicals) and 27‑28 (Petroleum products and inorganic chemicals), with examples such as Urea (HS 3102.10), Ethyl Acetate (2915.31) and Toluene (2902.20). The supplier identifies as an organic tier provider within a harbor trust tier, indicating compliance with internal quality frameworks. All listed items specify chemical composition, e.g., Methanol (CH3OH) as technical grade and Dioctyl Phthalate (C24H38O4) as a plasticizer.

The top‑listed categories include Ethyl Chloride, Ethylene, Methanol, Sodium Hexametaphosphate and Glycerine, reflecting a focus on bulk raw materials for downstream manufacturing. The product set also contains specialty monomers such as Vinyl Acetate Monomer (2915.32) and high‑purity solvents like Isopropyl Alcohol (2905.12) with typical purity of 99.9 %. Each entry provides the HS code and the primary material formula, enabling buyers to match tariff classifications and compliance requirements.

Product Range and Specialties of Vigo Chemicals FZE

The catalogue features ester solvents (Ethyl Acetate, N‑Butyl Acetate, Sec‑Butyl Acetate, Methyl Acetate) that are commonly supplied in 20 L drums or 200 L IBCs and meet ASTM D86 distillation ranges of 70‑80 °C for industrial grade. Glycol ethers such as Butyl Glycol Ether (2‑Butoxyethanol) and Diethylene Glycol are typical for coatings and cleaning formulations, with purity specifications of ≥ 99 % and water content ≤ 0.5 %. Alcohols listed - Methanol, Ethanol 92 %, Isopropyl Alcohol - are standard technical grades used in pharma intermediates and fuel additives, usually requiring REACH registration and an ISO 9001 quality system. Plasticizers (DOP, DOTP, Phthalic Anhydride) fall under HS 2917 and are graded by viscosity and plasticizing efficiency, with industry‑standard limits on residual monomers.

Aromatic hydrocarbons such as Toluene, Mixed Xylene and Solvent Naphtha 100 are classified under HS 2902‑2904 and are typically shipped in bulk tanker trucks or 40 ft containers, with specifications for aromatic content (e.g., xylene isomers ≥ 70 %). Base oil (anhydrous milk fat) and Paraffin Oil are listed under HS 0405 and 2710 respectively, commonly used in food‑grade lubricants and cosmetics, where purity ≥ 99.5 % and low odor are required.

Trade and Export Information - Vigo Chemicals FZE

Exporters of organic solvents and glycol ethers from the United Arab Emirates commonly serve chemical processing plants in the Middle East, South Asia and Europe. HS chapter 29 products such as Ethyl Acetate (2915.31) and MEG (2905.11.00) are subject to customs inspections for hazardous material classification, and buyers typically request a Material Safety Data Sheet (SDS) and a Certificate of Analysis (COA) that reference ISO 9001 or ISO 14001 compliance. Bulk shipments are frequently packed in 20‑ft or 40‑ft containers with inner drums, or in ISO bulk tank containers for petroleum‑derived oils, under Incoterms FOB Sharjah or CIF Dubai.

Regional import regulations often require REACH registration for EU destinations and EPA TSCA compliance for the United States. Quality certifications such as ISO 9001, ISO 14001 and OHSAS 18001 are standard expectations for chemical raw material suppliers, and customs authorities may request a declaration of hazardous classification under the GHS system. Export documentation normally includes commercial invoice, packing list, certificate of origin and, where applicable, a phytosanitary certificate for agro‑chemical grades.

Sourcing from Vigo Chemicals FZE - Buyer Guidance

Prospective buyers should request the latest SDS, COA and batch test reports that confirm purity, water content and heavy‑metal limits for each chemical. For solvents used in pharmaceuticals, a USP <467> or EP monograph reference may be required, while industrial users often verify compliance with ASTM D86 distillation ranges. Verifying the supplier’s ability to provide REACH‑registered documentation and ISO‑based quality management records helps mitigate regulatory risk.

Before placing a purchase order, confirm packaging size (e.g., 20 L drums, 200 L IBCs or bulk tanker) and the applicable Incoterm. Minimum order quantities typically start at one container load for bulk hydrocarbons, while specialty esters may be offered in smaller batches of 500 kg. Request a pre‑shipment sample if purity specifications are critical, and ensure that the sample is accompanied by a full analytical report.

What HS codes apply to the solvents offered by Vigo Chemicals FZE?

Solvent products such as Ethyl Acetate (2915.31), N‑Butyl Acetate (2915.39), and Methylene Chloride (2903.12) fall under HS chapter 29 for organic chemicals; aromatic hydrocarbons like Toluene use 2902.20, while bulk petroleum derivatives such as Paraffin Oil are classified under 2710.19.

Which certifications should I ask for when sourcing chemicals from this supplier?

Buyers should request a Certificate of Analysis, Material Safety Data Sheet, and evidence of ISO 9001 or ISO 14001 quality management. For EU shipments, REACH registration and for US shipments, EPA TSCA compliance are typical requirements.

What are the typical purity levels for the alcohols listed?

Isopropyl Alcohol is commonly supplied at ≥ 99.9 % purity, Ethanol 92 % is an aqueous solution with 92 % ethanol by volume, and Methanol is offered as technical grade, generally ≥ 99 % purity with moisture ≤ 0.2 %.

How are bulk chemicals like Solvent Naphtha 100 packaged for export?

Bulk aromatic hydrocarbon mixtures are usually loaded into ISO bulk tank containers or 40 ft containers with inner drums; packaging complies with UN 1993 hazardous material regulations for flammable liquids.

What is the standard lead time for a full container load of glycol ethers?

Lead times for glycol ethers such as Butyl Glycol Ether and Diethylene Glycol typically range from 4 to 6 weeks, depending on production scheduling and shipping route.

Are sample shipments available for the esters?

Yes, small‑scale samples (e.g., 5 L or 10 L) can be provided upon request, accompanied by a full analytical certificate that details purity, water content and flash point.

Which markets does Vigo Chemicals FZE primarily serve?

The supplier’s catalogue is oriented toward chemical manufacturers in the Middle East, South Asia and the European Union, sectors that use solvents, plasticizers and glycol intermediates for paints, polymers and pharmaceutical intermediates.

What documentation is required for customs clearance of the listed chemicals?

Customs typically require a commercial invoice, packing list, certificate of origin, SDS, COA and, where applicable, REACH or TSCA declarations; hazardous chemicals also need a UN number and proper labeling under GHS.