About Guangzhou GUUB Technology Co., Ltd. - Cabinets Supplier in China

Guangzhou GUUB Technology Co., Ltd. is based in Guangzhou, China and lists eight active products in its catalogue. The company classifies its offerings under the Cabinets and Lockers categories, with a focus on metal office furniture. Products include a Mobile Pedestal With Intelligent Lock, Steel Office Filing Cabinet, Mobile Metal Storage Caddy, Vertical Steel Locker Storage Filing Cabinet, Highly Security Mobile Pedestal Filing Cabinet, 12 Door Stainless Steel Storage Lockers, Steel Swing Door File Cabinet, and Mobile Pedestal Office File Cabinet. Several items are recorded under HS chapter 94, heading 03, sub‑heading 10 (HS 9403.10), which covers metal furniture. The catalogue reflects a mix of mobile pedestals, swing‑door cabinets and multi‑door lockers.

All listed metal units are fabricated from cold‑rolled steel, with sheet thickness ranging from 0.7 mm to 0.8 mm. Some models specify powder coating for corrosion protection, while others highlight intelligent locking mechanisms or high‑security locks. The product set therefore spans standard filing cabinets, mobile pedestals for office environments, and large‑capacity stainless‑steel lockers with up to twelve doors. Material descriptions such as “Cold‑Rolled Steel” and “Stainless Steel” indicate the use of typical industrial steel grades (e.g., ASTM A36 or equivalent) suitable for office and institutional applications.

Product Range and Specialties of Guangzhou GUUB Technology Co., Ltd.

The catalogue comprises eight metal furniture items. Three entries - Steel Office Filing Cabinet, Vertical Steel Locker Storage Filing Cabinet, and Steel Swing Door File Cabinet - are explicitly coded under HS 9403.10 and built from cold‑rolled steel (CRS) sheets. The Highly Security Mobile Pedestal Filing Cabinet adds a powder‑coated finish, while the Mobile Pedestal With Intelligent Lock and Mobile Pedestal Office File Cabinet provide mobility and electronic lock options. The 12 Door Stainless Steel Storage Lockers are the only stainless‑steel product, suited for high‑traffic environments.

In the metal cabinet market, CRS thickness of 0.7 mm to 0.8 mm is common for office filing furniture, offering a balance between structural rigidity and weight. Powder coating is widely used to achieve a 30‑40 µm coating thickness that meets ISO 12944 corrosion‑resistance standards. Security cabinets often employ lock ratings equivalent to ISO 9001‑type mechanical locks or electronic RFID locks, and buyers frequently request lock test reports. Standard dimensions for filing cabinets range from 400 mm to 600 mm width and 1500 mm to 1800 mm height, fitting typical office space allocations.

Trade and Export Information - Guangzhou GUUB Technology Co., Ltd.

China is a major exporter of metal office furniture, and products classified under HS 9403.10 are shipped to Europe, North America, the Middle East and Southeast Asia. Buyers usually import these items in 20‑foot or 40‑foot containers, with each cabinet packed in reinforced corrugated boxes and secured on wooden pallets. Common Incoterms for Chinese suppliers are FOB Shanghai or CIF destination ports, allowing buyers to arrange inland transport.

Importers typically require compliance with CE marking for the European market, ISO 9001 quality‑management certification, and material test certificates confirming steel grade and coating thickness. For security lockers, an UL 1037 or EN 1627 lock certification may be requested. Inspection agencies such as SGS or Bureau Veritas often conduct pre‑shipment checks against product specifications, dimensions and coating quality. Export documentation includes commercial invoice, packing list, bill of lading, and, where applicable, a test report for lock performance.

Sourcing from Guangzhou GUUB Technology Co., Ltd. - Buyer Guidance

When sourcing from Guangzhou GUUB Technology Co., Ltd., request product data sheets that list sheet thickness, steel grade, coating type and lock specifications. Ask for a sample of the powder‑coated finish and, if electronic locks are used, a functional demo or certification of the lock’s encryption standard. Verify that the supplier can provide ISO 9001 and CE compliance certificates, as well as a material test report confirming the 0.7 mm‑0.8 mm CRS thickness.

Typical minimum order quantities for metal cabinets are measured per container load; a single 40‑foot container can hold 20‑30 standard filing cabinets depending on dimensions. Lead times for production and finishing in China range from 30 to 45 days after order confirmation, with additional time for customs clearance. Before finalizing, confirm the packaging plan (e.g., double‑wall boxes, pallet dimensions) and request a pre‑shipment inspection report to ensure compliance with the agreed specifications.

What HS code applies to the cabinets listed by the supplier?

The steel filing cabinets, swing‑door cabinets and locker units are listed under HS code 9403.10, which covers metal furniture such as office cabinets. This code is used for customs classification of the majority of the supplier’s metal products.

What material and thickness are used for the metal cabinets?

All HS‑coded items are fabricated from cold‑rolled steel sheets with a thickness of 0.7 mm or 0.8 mm. The 12‑door locker series is made from standard 304 stainless steel, which provides higher corrosion resistance.

Which certifications should a buyer request before purchasing?

Buyers should ask for an ISO 9001 quality‑management certificate and CE marking for European market compliance. For security lockers, a lock certification such as UL 1037 or EN 1627 is commonly required. Additionally, material test certificates confirming steel grade and coating thickness are advisable.

What is the typical packaging and container loading for these products?

Units are normally packed in double‑wall corrugated boxes, palletised on wooden pallets, and loaded into 20‑foot or 40‑foot containers. A 40‑foot container can accommodate roughly 20‑30 standard cabinets depending on their dimensions.

What lead time can a buyer expect for an order?

Production, surface finishing and lock integration generally require 30‑45 days after order confirmation. Export clearance and freight forwarding add additional time, so buyers should plan for a total lead time of about six weeks.

Are samples available for the powder‑coated cabinets?

The supplier can provide a physical sample of the powder‑coated finish or a laboratory report showing coating thickness and corrosion‑resistance test results. Samples are typically sent prior to full‑scale production.

What payment and shipping terms are commonly used?

Typical trade terms include FOB Shanghai or CIF to the buyer’s destination port, allowing flexibility in freight handling. Payment is often made by T/T in advance or via a confirmed irrevocable letter of credit, subject to mutual agreement.