About yahya&co - Leather Goods Supplier in Pakistan

Based in Punjab, Pakistan, yahya&co currently lists eight active products in its catalogue. The company focuses on leather‑based accessories and related metal‑component items. Its product set includes various belts, wallets, shoes and specialty footwear, each identified with specific HS‑code families such as 8308.90 for metal‑alloy belts, 4203.40 for genuine leather belts, 4202.32 for leather wallets, and the 6403.xx series for footwear. The catalogue differentiates between metal‑finished belts (zinc alloy, brass or stainless steel) and genuine leather belts made from cowhide. All footwear entries are classified under 6403.91 or 6403.19 depending on sole material, while the woven moccasin carries HS 6403.99.

The listed top categories cover industrial and sports belts, martial‑arts and massage belts, standard leather belts, belt buckles and leather footwear such as Chuka boots, Peshawari chappals, Oxford shoes and woven moccasins. Materials range from cow‑hide and goat‑hide leather to mixed metal alloys for buckles, with soles in rubber, leather or woven textile. The eight catalogue entries map directly to these categories, providing buyers with clear HS‑code references for customs clearance. The product mix reflects typical Pakistani leather export lines that combine traditional craftsmanship with metal‑hardware accessories.

Product Range and Specialties of yahya&co

The catalogue shows two belt families: metal‑alloy belts (HS 8308.90) made from zinc alloy, brass or stainless steel, and genuine leather belts (HS 4203.40) cut from cowhide. Leather wallets (HS 4202.32) use full‑grain or top‑grain cowhide, while footwear items - shoes, Chuka boots, Peshawari chappals, Oxford shoes and woven moccasins - fall under HS 6403.91, 6403.19 and 6403.99 and feature leather uppers with rubber, leather or woven textile soles. In the broader leather goods market, buyers typically specify leather grades (full‑grain, top‑grain), thickness of 1‑3 mm for belts, stitching counts of 100‑150 stitches per inch, and buckle corrosion‑resistant coatings such as nickel or chrome plating. Footwear specifications often include sole hardness measured by Shore A (45‑55 for casual shoes) and outsole slip‑resistance ratings. These industry standards help buyers compare quality across suppliers.

Trade and Export Information - yahya&co

Pakistan’s leather sector exports primarily to the European Union, the United States, the Gulf Cooperation Council and East Asian markets. HS chapter 42 items such as belts and wallets are subject to REACH compliance for metal components and to leather‑specific phytosanitary checks in the EU. Common certifications requested by importers include ISO 9001 for quality management, Oeko‑Tex Standard 100 for chemical safety of metal buckles, and leather‑grade certificates confirming full‑grain or top‑grain status. Shipping is usually arranged on FOB Karachi or FCA Lahore, with products packed in reinforced cardboard boxes or wooden crates for bulk orders. Typical container loads are 20‑ft containers holding up to 1,200 pairs of shoes or 1,800 belts, depending on packaging density.

Sourcing from yahya&co - Buyer Guidance

When sourcing from yahya&co, buyers should ask for a leather grade certificate that details the hide source, tannage method and thickness. For metal‑alloy belts and buckles, request a material safety data sheet (MSDS) and a compliance statement for REACH lead‑content limits (≤0.1 % Pb). Sample requests should include at least one belt of each material, one wallet and one pair of shoes to verify stitching quality, colour consistency and sole adhesion. Verify that the supplier can provide third‑party inspection reports (e.g., SGS or Bureau Veritas) covering dimensional tolerances, tensile strength of belts (minimum 200 N) and sole hardness for footwear. Confirm packaging details - inner poly‑bags, outer cardboard, and wood pallets - and the preferred Incoterm before finalising the order.

What types of belts does yahya&co offer and under which HS codes?

The company lists metal‑alloy belts classified under HS 8308.90 and genuine leather belts classified under HS 4203.40. Both categories cover industrial, gym, martial‑arts and fashion belts.

Which material is used for the wallets and what HS code applies?

Wallets are made from genuine cowhide leather and are recorded under HS 4202.32.

What are the main material differences between the shoes and the moccasins?

Shoes and Chuka boots use a genuine leather upper with a rubber or leather outsole and fall under HS 6403.91, while woven moccasins have a leather upper combined with a woven textile detail and are classified under HS 6403.99.

What certifications should a buyer request for metal belt components?

Buyers should request an REACH compliance statement and an MSDS for the zinc alloy, brass or stainless steel parts, as well as any third‑party test report confirming lead content below EU limits.

What typical minimum order quantities (MOQ) are expected for belts and footwear?

In the Pakistani leather export market, MOQs commonly range from 500 to 1,000 units for belts and 300 to 600 pairs for footwear, depending on the product style and packaging.

What lead time does yahya&co usually require for a standard order?

Standard production lead times are typically 30‑45 days from order confirmation, with longer periods for custom finishes or special metal‑coated buckles.

How are the products usually packaged for international shipment?

Products are packed in sealed poly‑bags, grouped in reinforced cardboard boxes, and loaded onto wooden pallets. For bulk footwear shipments, wooden crates are used to protect the soles during transit.