About Foshan Cityjiaweixin Ceramics Co. Ltd. - Tiles Supplier in China

Foshan, China supplier Foshan Cityjiaweixin Ceramics Co. Ltd. lists five active products in its catalogue. The company focuses on the Blocks, Tiles & Slabs and Floor Tiles categories, with each item described as a Rustic tile. Two of the Rustic tile entries include explicit HS codes: 6907.21 for glazed ceramic tiles and 6908.90 for glazed ceramic or porcelain tiles. Materials cited in the catalogue range from standard glazed ceramic to ceramic/porcelain tiles with nano‑gloss or nano‑polished finishes. The product identifiers J33401, J33402, J33404 and J33405 differentiate the specific finishes and HS classifications offered.

The Rustic tile series is presented under two HS‑code families: 6907.21, which generally covers ceramic tiles for wall and floor applications, and 6908.90, which covers other ceramic products not elsewhere specified. The listings note variations such as “Glazed Ceramic”, “Ceramic / Porcelain Tile with Nano Gloss Finish”, and “Glazed Ceramic / Nano‑Polished Porcelain Tile”, indicating a focus on surface treatment technologies. No additional product types beyond these five Rustic tile variants are shown in the current catalogue.

Product Range and Specialties of Foshan Cityjiaweixin Ceramics Co. Ltd.

The catalogue comprises Rustic tile products identified by four model numbers (J33401, J33402, J33404, J33405) and a generic Rustic tile entry. All items fall within the ceramic tile segment, with HS codes 6907.21 and 6908.90 indicating glazed ceramic or porcelain tiles. In the broader market, ceramic floor tiles are commonly supplied in sizes from 300 × 300 mm to 600 × 600 mm, with thicknesses of 8 - 12 mm and a water absorption rate below 0.5 % as required by ISO 13006. Typical industry grades include PEI (Porcelain Enamel Institute) ratings from 1 to 5 for slip resistance, and R‑values for abrasion resistance. Buyers often request specifications such as glaze gloss level, nano‑coating thickness, and dimensional tolerances of ±1 mm.

Trade and Export Information - Foshan Cityjiaweixin Ceramics Co. Ltd.

China is the world’s largest exporter of ceramic tiles, and Foshan is a major production hub within the country. Export shipments of tiles in HS‑code 6907 and 6908 are usually loaded in 20‑foot or 40‑foot containers, palletised on wooden or plastic pallets and wrapped in shrink film to protect the glazed surface. Primary import markets for Chinese ceramic tiles include the European Union, the United States, the Middle East, and Southeast Asia, where construction and interior‑design projects drive demand. Buyers typically require certificates such as ISO 9001 quality‑management, CE marking for EU compliance, and test reports for water absorption, breaking strength, and slip resistance. Common Incoterms used are FOB Foshan or CIF destination port, with freight forwarders handling customs clearance under the relevant HS‑code declarations.

Sourcing from Foshan Cityjiaweixin Ceramics Co. Ltd. - Buyer Guidance

When sourcing Rustic tiles from this supplier, buyers should request a material test report that covers water absorption (≤0.5 %), breaking strength (≥30 MPa for floor tiles), and slip resistance (PEI rating). Samples of the nano‑gloss and nano‑polished finishes should be examined for surface uniformity, gloss level (measured in gloss units), and edge quality. Verify that the HS codes on the commercial invoice match the catalogue entries (6907.21 or 6908.90) and that the packaging description aligns with palletised, shrink‑wrapped loads. Ask for any available certifications - ISO 9001, CE, or third‑party laboratory reports - to confirm compliance with international standards. Confirm lead times, minimum order quantities (often expressed in square metres per container), and the preferred Incoterm before finalising the purchase order.

What product codes does Foshan Cityjiaweixin Ceramics list for Rustic tiles?

The catalogue includes Rustic tile codes J33401, J33402, J33404 and J33405, each linked to either HS 6907.21 or HS 6908.90 depending on the glaze and finish.

Which HS codes apply to the Rustic tile range?

Two HS codes are used: 6907.21 for glazed ceramic tiles and 6908.90 for other glazed ceramic or porcelain tiles not otherwise specified.

What material finishes are offered for the Rustic tiles?

Finishes include standard glazed ceramic, a nano‑gloss finish on ceramic/porcelain tile, and a nano‑polished surface on glazed ceramic porcelain tile.

What standard specifications should buyers check for these tiles?

Buyers should verify water absorption below 0.5 %, breakage strength of at least 30 MPa, PEI slip‑resistance rating appropriate for the intended area, and compliance with ISO 13006 size and tolerance rules.

Which certifications are typically required for Chinese ceramic tile exports?

Importers usually request ISO 9001 quality‑management certification, CE marking for EU markets, and laboratory test reports for water absorption, breaking strength and slip resistance.

How are the Rustic tiles typically packaged for shipment?

Tiles are commonly palletised, each pallet wrapped in shrink film, and loaded in 20‑ft or 40‑ft containers to protect the glazed surfaces during ocean freight.