About Euke MagTech Ltd. - Magnet Supplier in China

Based in China, Euke MagTech Ltd. lists five active products across its catalogue. The company’s offerings fall under the categories of Machined Components, Electric Components, Magnets & Magnetic Products, and Industrial Supplies. Its product list includes an N48 sintered NdFeB permanent magnet designed for wind‑turbine generators, an N45 D25×10×20 mm sintered NdFeB magnet, a generic rare‑earth magnet entry, an N35 D15×3 mm small disc magnet intended for packaging and box applications, and an N42 large‑block Y30BH separator magnet. These items are commonly classified under HS chapter 85, particularly heading 8505 for permanent magnets. The catalogue does not provide additional specifications such as coating or dimensions beyond those stated.

The N48 and N45 magnets are described as sintered NdFeB (neodymium‑iron‑boron) products, indicating a high maximum energy product typical of grades above N40. The N35 disc magnet is listed with a 15 mm diameter and 3 mm thickness, a size often used for lightweight fastening. The N42 separator magnet is identified as a “big block” type, which in industry is applied in magnetic separation equipment. The generic “Rare earth magnets” entry suggests the supplier can source additional NdFeB or other rare‑earth compositions on demand. All five items are presented without explicit HS‑code numbers, but they align with the standard HS classification for permanent magnet articles.

Product Range and Specialties of Euke MagTech Ltd.

Euke MagTech’s catalogue covers sintered NdFeB magnets ranging from N35 to N48 grade. In the magnet industry, N35 typically delivers a maximum energy product (BHmax) around 35 MGOe, suitable for low‑field applications, while N48 reaches approximately 48 MGOe and is used in high‑performance generators such as wind‑turbine rotors. Standard specifications for these grades include coercivity (Hc) above 10 kOe for N45 and higher for N48, and operating temperatures up to 150 °C when coated with nickel‑copper‑nickel. Disc magnets like the N35 D15×3 mm are frequently supplied with a surface coating to prevent corrosion and are packaged in anti‑static bags. Large‑block magnets such as the N42 Y30BH are commonly employed in magnetic separators and are sized to fit industrial steel frames. Buyers of rare‑earth magnets also look for IEC 60404 test reports that verify magnetic flux density and temperature stability.

Trade and Export Information - Euke MagTech Ltd.

China is one of the world’s largest exporters of NdFeB permanent magnets, and shipments from the country are typically recorded under HS heading 8505. Major import destinations include the European Union, the United States, Japan, and South Korea, where the magnets are used in automotive electric‑drive systems, renewable‑energy generators, and consumer electronics. Export logistics usually involve 20‑ft or 40‑ft containers packed with moisture‑proof liners, and common Incoterms are FOB Shanghai or CIF European ports.

Importers frequently require certifications such as ISO 9001 quality‑management, IEC 60404 magnetic‑property test reports, and RoHS compliance to confirm the absence of hazardous substances. Additional documentation may include a material‑composition certificate specifying the percentages of neodymium, iron, boron, and any added dysprosium or terbium for high‑temperature grades. Customs authorities often inspect the HS code declaration and request a commercial invoice that details the magnet grade, dimensions, and coating type.

Sourcing from Euke MagTech Ltd. - Buyer Guidance

When sourcing from Euke MagTech, buyers should request a detailed specification sheet that lists the magnet grade (N35‑N48), dimensions, coating material, and maximum operating temperature. A third‑party IEC 60404 test report confirming magnetic flux density, coercivity, and temperature stability helps verify product performance before bulk ordering.

Typical minimum order quantities for standard sizes range from a few hundred pieces to several thousand, depending on the grade and shape. Lead times of four to six weeks are common for sintered NdFeB magnets after order confirmation, and buyers should confirm packaging details such as nickel‑copper‑nickel coating and moisture‑barrier bags to avoid corrosion during transit.

What magnet grades are listed in the catalogue?

The catalogue lists N35, N42, N45, and N48 sintered NdFeB grades, plus a generic rare‑earth magnet entry.

What are the typical dimensions of the listed magnets?

The N45 magnet is specified as D25 × 10 × 20 mm, the N35 disc magnet as D15 × 3 mm, while the N48 wind‑turbine magnet and the N42 separator block are described without exact dimensions but are sold as standard high‑energy‑product blocks.

Which HS code is applicable to these products?

Permanent rare‑earth magnets are generally classified under HS chapter 85, heading 8505 for permanent magnet articles.

What certifications should I request before purchasing?

Buyers usually ask for an ISO 9001 quality‑management certificate, an IEC 60404 magnetic‑property test report, and a RoHS compliance statement.

How are the magnets packaged for export?

Magnets are typically coated with nickel‑copper‑nickel, placed in moisture‑proof anti‑static bags, and loaded into wooden crates or pallets inside a sealed container.

What are the common Incoterms used for shipping from China?

Suppliers often quote FOB Shanghai or CIF to major ports in Europe or the United States.

What is a typical lead time for an order of standard sintered NdFeB magnets?

Standard production and shipping usually require four to six weeks from order confirmation, longer for custom sizes or special coatings.