About Care Optical Industrical Co. - Dental Equipments & Materials Supplier in China

Care Optical Industrical Co. is registered in China and currently lists eight active products across four categories: Dental Equipments & Materials, Optical Machinery & Equipment, Optical Lenses, and Industrial Goggles. The catalogue includes dental and surgical loupes, binocular TTL loupes, polarized sunglasses with CR‑39 tinted lenses, safety goggles, and a dental surgical illumination unit. Three items - the TTL loupes, the quality dental surgical loupes, and the surgical light - are recorded under HS code 9018.90 and feature frames of titanium alloy or aluminum alloy combined with optical‑glass lenses or LED housings.

The remaining products are described without HS codes but fall within the same HS chapter for optical instruments and safety equipment. Materials listed include titanium alloy frames, optical glass lenses, aluminum alloy frames, and medical‑grade LED assemblies housed in ABS or metal. The product set reflects a focus on precision visual aids for dental and medical applications as well as protective eyewear for industrial use.

Product Range and Specialties of Care Optical Industrical Co.

The supplier’s catalogue offers a range of magnifying loupes with magnifications from 2.5× to 8.0×, typical for dental and surgical procedures where depth of field and ergonomic design are critical. Industry standards such as ISO 16359 for optical instruments and IEC 60950 for safety of medical electrical equipment are commonly applied to similar products. Materials like titanium alloy provide lightweight strength, while optical glass lenses meet refractive index specifications around 1.523 for clear vision. Polarized sunglasses listed with CR‑39 lenses usually conform to UV‑400 protection and meet standards like ANSI Z80.3 for optical radiation.

Industrial safety goggles are generally required to meet ANSI Z87.1 impact resistance or the European EN 166 standard. For the LED surgical illumination unit, typical specifications include a luminous flux of 5,000‑10,000 lumens, color temperature around 5,000 K, and a power consumption under 30 W, aligning with IEC 60601‑1 medical device safety requirements.

Trade and Export Information - Care Optical Industrical Co.

China is a major exporter of optical instruments and protective eyewear, with the HS chapter 90 (9018.90) covering medical, surgical and optical devices. Buyers in Europe, North America, and the Middle East frequently import these goods, often requiring CE marking for the EU market and FDA registration for the United States. Commonly requested certifications include ISO 13485 for medical device quality management and ISO 9001 for general manufacturing quality.

Typical export logistics involve shipping in 20‑foot or 40‑foot containers, with products packed in sturdy cartons and protective foam to avoid lens damage. Incoterms such as FOB Shanghai or CIF destination ports are standard. Chinese exporters of optical equipment often provide inspection reports from SGS or Intertek, and may arrange pre‑shipment sampling under CIP terms.

Sourcing from Care Optical Industrical Co. - Buyer Guidance

When sourcing loupes or surgical illumination units, buyers should request a product data sheet that lists magnification, field of view, lens material, frame weight, and any anti‑reflective coating specifications. Sample lenses should be inspected for optical clarity (MTF values above 0.8 at 50 lp/mm are typical) and for compliance with ISO 16359.

For safety goggles, verify compliance certificates for ANSI Z87.1 or EN 166 and request a test report showing impact resistance at the required velocity (e.g., 150 ft/s). Confirm that LED units include an IEC 60601‑1 conformity statement and that the packaging meets ISPM 15 phytosanitary regulations for wooden pallets if used in the shipment.

What magnification ranges are available for the dental loupes listed by Care Optical?

The catalogue specifies dental surgical loupes with magnifications from 2.5× up to 8.0×, which matches the common range used in restorative and implant dentistry.

Which HS code applies to the TTL loupes and the surgical illumination unit?

Both the TTL loupes and the dental surgical illumination unit are recorded under HS code 9018.90, the classification for optical instruments and medical devices.

What material is used for the frames of the listed loupes?

The TTL loupes use a titanium alloy frame with optical glass lenses, while the quality dental surgical loupes use an aluminum alloy frame combined with optical glass lenses.

Are there standard certifications buyers should request for these optical products?

Buyers typically request CE marking for EU markets, FDA clearance for the United States, and quality management certificates such as ISO 13485 or ISO 9001 for medical‑grade optical devices.

What safety standards apply to the industrial safety goggles offered?

The safety goggles should comply with ANSI Z87.1 impact resistance or EN 166 vision protection standards, and buyers should ask for the corresponding test report.

How are the LED surgical lights packaged for export?

The surgical illumination unit is described with a medical‑grade LED housed in ABS/metal and is usually packed in reinforced cartons with foam inserts to protect the lens and electronics during container shipping.

What typical lead time and MOQ can buyers expect for these products?

Chinese manufacturers of optical equipment often quote a lead time of 30‑45 days for production after receiving a confirmed purchase order, with minimum order quantities ranging from 100 to 500 units depending on the specific item.

Which documentation is needed to verify the quality of the polarized sunglasses?

Buyers should request a product data sheet indicating CR‑39 lens grade, UV‑400 protection level, and any coating specifications, along with a compliance certificate for ANSI Z80.3 or CE for sunglasses.