About Burifil S.L - Fireplaces Supplier in Spain

Spain hosts 31 active products from Burifil S.L. The catalogue covers items in the fireplaces, tapes, zipper bags, polyester, fasteners and springs categories. Products listed include Mattress Tape models (ES32002, LS32002, LS32001, ES32001 and variants with smooth or spike designs), continuous nylon zippers (S60, T10 18 g, T12 No. 7), a wide selection of polyester threads such as Sunstop, Nomassol, Filan BT, AFITEX 80, Quilting Thread 60/3, Thread to close 36 and several branded lines (Aficore, Afispun, Afitex, Permacore, Polylux, Filan), braided waxed, semi‑waxed and lubricated polyester, as well as hardware items like stainless‑steel hinges (HS 8302.10) and gas springs, plus a 3 mm round elastic for masks. The hinges are specified as stainless steel 304/316, brass or zinc alloy, matching the HS code supplied. The list also mentions “Buribobbins (cocoons)” and generic bobbins used for thread winding.

The supplier’s active range does not provide HS codes for most items; the only explicit code is 8302.10 for the stainless‑steel hinges, which belongs to HS chapter 83 for base metal fittings. The remaining products fall under HS chapter 39 (plastic and rubber articles) for tapes and zippers, chapter 63 (textile articles) for polyester threads and braided yarns, and chapter 73 for metal fasteners and springs. The catalogue is organized by product type rather than batch numbers, giving a clear view of the 31 distinct SKUs available for export.

Product Range and Specialties of Burifil S.L

The listed tapes are typical PVC‑coated polyester tapes used for mattress edging, commonly supplied in widths from 20 mm to 40 mm and tensile strengths around 250 N. Industry standards such as ISO 9001 for dimensional stability and colorfastness (ISO 105‑C06) are frequently applied. Continuous nylon zippers T10 and T12 are standard coil zippers with tooth widths of 5 mm and 7 mm respectively, weighing about 18 g per meter for the T10 version, and are tested to ISO 6330 for seam strength. Polyester threads in the catalogue include denier grades 60/3 and 36, textured yarns of 20 000 m per roll, and waxed or lubricated variants that meet Oeko‑Tex Standard 100 for textile safety. Braided polyester yarns (waxed, semi‑waxed, lubricated) are typically rated for tensile loads of 300 MPa and are used in outdoor applications such as tarps and industrial sewing. The stainless‑steel hinges (HS 8302.10) are offered in 304/316 grades, providing corrosion resistance up to 150 °C, and are commonly supplied with a load capacity of 150 N per hinge. Gas springs listed are generally sized for forces between 300 N and 1 500 N with stroke lengths of 30 mm to 100 mm, and the 3 mm round elastic for masks is usually silicone‑based with an elongation of 400 %.

Trade and Export Information - Burifil S.L

Spain’s textile and metal accessory sector exports heavily to the European Union (Germany, France, Italy), North America, the Middle East and North‑African markets. HS 8302.10 hinges typically require CE marking and REACH compliance, while polyester threads and tapes are often accompanied by ISO‑9001 quality certificates and Oeko‑Tex Standard 100 test reports. Zippers fall under EN 71 when destined for children’s products and may need additional safety testing. Common export packaging includes 20‑ft or 40‑ft containers, with tapes and zippers packed on Euro pallets, threads in moisture‑barrier bags, and hardware in corrugated boxes. Incoterms such as FOB Barcelona or CIF Mediterranean ports are standard for Spanish exporters. For non‑EU destinations, a customs duty of around 2.7 % applies to metal fittings, while textile accessories benefit from preferential rates under various trade agreements.

Sourcing from Burifil S.L - Buyer Guidance

When sourcing from Burifil S.L, request a product data sheet that details material composition (e.g., PVC‑coated polyester, nylon 6.6, stainless‑steel 304/316), dimensions, tensile strength, colour code and any relevant ISO test results. Ask for a sample of the specific tape width or zipper type before placing a bulk order, and verify that the hinges are accompanied by a CE conformity declaration and REACH safety data sheet. For polyester threads, request Oeko‑Tex Standard 100 certification and a mill test report confirming denier, twist per metre and colour fastness. Confirm the gas spring’s force‑deflection curve and stroke length, and ensure the 3 mm elastic for masks includes a material safety data sheet indicating hypo‑allergenic properties. Typical minimum order quantities are 500 m for tapes, 1 000 pcs for continuous zippers, 200 kg for bulk polyester thread, and 100 pcs for hinges; lead times range from 15 to 30 days after sample approval.

What product codes are associated with the stainless‑steel hinges?

The hinges are listed under HS code 8302.10 and are made from stainless steel 304/316, brass or zinc alloy, matching the standard classification for base metal fittings.

Which standards apply to the polyester threads offered by Burifil S.L?

Typical standards include ISO 9001 for quality management and Oeko‑Tex Standard 100 for textile safety; buyers should request the corresponding certificates and mill test reports.

What are the common dimensions and strengths of the Mattress Tape products?

Mattress tapes are generally 30 mm wide, PVC‑coated polyester, with tensile strength around 250 N and are supplied in colour variants such as smooth design and spike design.

How are the continuous nylon zippers specified?

The catalogue lists a continuous nylon S60 zipper, a T10 coil weighing 18 g per metre (tooth width 5 mm) and a black T12 coil (tooth width 7 mm). They meet ISO 6330 seam‑strength requirements.

What certifications should a buyer verify for the gas springs?

Buyers should request a CE declaration of conformity, a REACH safety data sheet, and a test report showing the force range (e.g., 300‑1 500 N) and stroke length.

Are there any packaging norms for the polyester threads?

Threads are normally packed in moisture‑barrier bags of 20 kg or 50 kg rolls, placed on Euro pallets, and labelled with batch number, denier and colour.

What is the typical lead time for an order of hinges?

After sample approval and receipt of required certifications, hinges are usually ready for shipment within 20‑25 days.

Which documents are essential before finalising a purchase?

Essential documents include product data sheets, material safety data sheets (MSDS), relevant ISO or Oeko‑Tex certificates, CE conformity for metal parts, and a commercial invoice specifying HS codes.