About Ross & Mount - Heavy Machinery Supplier in India

India, specifically Chennai in the state of Tamil Nadu, hosts Ross & Mount, which currently lists five active product lines in its catalogue. The supplier is classified as an imported tier with a voyage trust rating, indicating its participation in cross‑border trade. Ross & Mount’s catalogue focuses on press equipment rather than the broader pump categories listed in its top‑category profile. Each product entry reflects a distinct type of press used in industrial and laboratory settings. The company’s public data does not include financial or employee figures, limiting the description to the listed offerings.

The catalogue includes Hydraulic Presses (HS 8462.20) manufactured from carbon steel, Laboratory Presses with no HS code disclosed, C‑Frame Presses offered in 50 kN, 100 kN, 300 kN and 600 kN capacities, Hot and Cold Presses also in 50 kN, 100 kN, 300 kN and 600 kN variants, and Compression Moulding Presses (HS 8477.80) built from carbon steel or alloy‑steel frames combined with hydraulic components. These products cover a pressure range from 50 kN up to 600 kN, suitable for metal forming, composite molding, and laboratory sample preparation. The material specifications mention carbon steel and alloy steel, which are common for high‑strength press frames. No additional HS codes or material details are provided for the Laboratory Presses, C‑Frame Presses, or Hot and Cold Presses. The data set does not indicate any certifications held by the supplier.

Product Range and Specialties of Ross & Mount

Ross & Mount’s listed presses fall within the industrial press segment, where carbon steel grades such as S275 or ASTM A36 are frequently used for frame construction, while alloy‑steel variants often employ AISI 4140 for higher load tolerance. Hydraulic Presses classified under HS 8462 typically meet ISO 12100 safety standards and may carry CE marking for European markets. C‑Frame and Hot/Cold Press models with capacities from 50 kN to 600 kN are commonly equipped with double‑acting hydraulic cylinders, pressure gauges calibrated to ±1 % accuracy, and safety interlocks that comply with IEC 60204‑1. Compression Moulding Presses (HS 8477) are often designed for polymer or composite molding, using alloy‑steel frames to resist cyclic loading and may feature temperature control units that adhere to ASTM D3418 for thermal stability. Buyers usually request material test certificates confirming tensile strength and hardness (e.g., 250 MPa yield strength for carbon steel) and verify that hydraulic systems conform to ISO 4406 contamination class standards.

Trade and Export Information - Ross & Mount

India is a significant exporter of industrial machinery, and hydraulic or compression presses are routinely shipped to buyers in the Middle East, Southeast Asia, Africa, and Europe. The HS 8462.20 code for hydraulic presses and HS 8477.80 for compression moulding presses fall under Chapter 84, which is subject to standard customs valuation and may require a pre‑shipment inspection under the Indian Export Inspection Council (IEIC). Typical buyer requirements include CE Declaration of Conformity, ISO 9001 quality‑management certification, and, for certain markets, an Indian Export License. Presses of this size are usually packed in crate‑type wooden boxes with internal steel brackets, sized to fit a 20 ft or 40 ft container; weight per unit can range from 1 t for a 50 kN C‑Frame to over 5 t for a 600 kN hydraulic press. Common Incoterms used by Indian machinery exporters are FOB Chennai Port or CIF Dubai, allowing buyers to arrange inland transport and customs clearance in the destination country.

Sourcing from Ross & Mount - Buyer Guidance

When sourcing presses from Ross & Mount, buyers should request a full material test report that specifies the steel grade, tensile strength, and hardness of the frame. A hydraulic system test report confirming pressure rating, leak‑free operation, and compliance with ISO 4406 particle contamination limits is also advisable. Buyers typically ask for a CE Declaration of Conformity or equivalent national certification to ensure the equipment meets safety directives in the target market. Verifying the presence of safety interlocks, pressure gauges calibrated to international standards, and any optional temperature control modules helps confirm the unit matches the required specifications. Before placing a full order, requesting a single unit sample or a short‑lead‑time trial shipment (often 1 - 2 units) enables the buyer to inspect workmanship, packaging quality, and documentation completeness.

What pressure capacities are available for Ross & Mount’s presses?

The catalogue lists C‑Frame, Hot and Cold, and Hydraulic Presses in four standard capacities: 50 kN, 100 kN, 300 kN and 600 kN.

Which HS codes apply to the listed press products?

Hydraulic Presses are classified under HS 8462.20, while Compression Moulding Presses fall under HS 8477.80. The other press types have no specific HS code disclosed in the public data.

What material is used for the frames of the Hydraulic Presses?

The frames are manufactured from carbon steel, a common choice for high‑strength industrial press structures.

Are certifications such as CE or ISO available for these presses?

The supplier’s public data does not list any certifications held. Buyers should request a CE Declaration of Conformity and ISO 9001 quality‑management certificates as part of the procurement process.

What is the typical packaging and container size for shipping a 600 kN press?

Units of this size are usually crated in reinforced wooden boxes with internal steel brackets and shipped in a 40 ft container; weight can exceed 5 tonnes per unit.

Which markets commonly import presses from India?

Major importers include countries in the Middle East, Southeast Asia, Africa and Europe, where the machinery is used in metal forming, composite molding and laboratory applications.

What documentation should be verified before finalizing an order?

Buyers should obtain material test certificates, hydraulic system test reports, CE or equivalent safety declarations, and a copy of the commercial invoice indicating the correct HS code.

What Incoterms are typically used for Indian press exporters?

FOB Chennai Port and CIF to major regional hubs such as Dubai are the most frequently employed Incoterms for these types of machinery.