About Bombino - Industrial Belts & Straps Supplier in India

Bombino is based in India and currently lists five active products in its catalogue. The company focuses on industrial belts and industrial adhesive tape solutions. Its product list includes conveyor belts, PTFE coated fiberglass belts, compactor felts, PTFE coated fiberglass fabrics with adhesive tapes, and fusing belts. Each item falls under the broader industrial belt and strap segment, which is classified under HS Chapter 40 for rubber and plastics. The catalogue reflects a niche offering within the Indian manufacturing sector.

The five products cover both material handling and heat‑resistant applications. Conveyor belts are typically used for continuous transport in factories, while PTFE coated fiberglass belts provide high‑temperature resistance for processes up to 260 °C. Compactor felts are employed in soil and waste compaction equipment, and PTFE coated fiberglass fabrics combined with adhesive tapes serve as sealing or joining layers in specialized machinery. Fusing belts are used in textile and non‑woven production for heat‑fusion operations. All items are produced to industry‑standard dimensions and are export‑oriented.

Product Range and Specialties of Bombino

Bombino’s conveyor belt range comprises fabric‑reinforced rubber or PVC profiles, commonly offered in widths from 300 mm to 2000 mm and thicknesses between 2 mm and 15 mm. The PTFE coated fiberglass belt is a composite of glass‑fiberglass fabric laminated with a PTFE layer, providing chemical inertness and temperature endurance up to 260 °C. Compactor felts are dense, non‑woven polyester or polypropylene mats, supplied in rolls of 1 m to 2 m width and lengths up to 500 m. PTFE coated fiberglass fabrics with adhesive tapes combine the same high‑temperature fabric with pressure‑sensitive acrylic or rubber‑based tapes for sealing applications. Fusing belts are flat, heat‑conductive belts used in textile bonding, typically 0.5 mm to 2 mm thick.

In the industrial belt market, buyers usually specify tensile strength (often 10‑30 MPa for rubber belts) and elongation at break (300‑600 %). PTFE coated products are graded by coating thickness (typically 0.05‑0.2 mm) and by the temperature class (e.g., Class 260 for up to 260 °C). Compactor felts are evaluated by bulk density (around 150‑250 kg/m³) and compression resistance. Adhesive tapes are classified by peel adhesion (e.g., 2‑5 N/25 mm) and shear strength. These standard parameters help buyers compare offerings across suppliers.

Trade and Export Information - Bombino

India is a major exporter of industrial belts and adhesive tapes, with shipments directed to automotive, food processing, mining, and textile manufacturers in Europe, the Middle East, and Southeast Asia. The products fall under HS Chapter 40 for rubber and plastics and Chapter 39 for adhesives, which are subject to customs inspection for compliance with material safety data sheets. Typical certifications requested by importers include ISO 9001 quality management, ISO 14001 environmental management, CE marking for EU markets, and UL listing for North America. Export shipments are commonly packed on wooden pallets, wrapped in stretch film, and loaded in 20‑ft or 40‑ft containers, with FOB or CIF incoterms negotiated.

Indian manufacturers such as Bombino often provide test reports covering tensile strength, temperature resistance, and adhesion performance to meet buyer specifications. Import regulations may require conformity to REACH for chemical safety in the EU and to ASTM standards (e.g., ASTM D395 for rubber hardness) in the United States. Buyers should verify that the supplied documentation aligns with the HS code of the specific product to avoid customs delays. Seasonal demand peaks occur in the first and fourth quarters, influencing lead times and container availability.

Sourcing from Bombino - Buyer Guidance

Buyers sourcing belts from Bombino should request the product data sheet, including dimensions, tensile strength, elongation, temperature class, and PTFE coating thickness where applicable. Samples of at least 2 m length per belt type are standard for performance verification before placing a full order. It is advisable to obtain ISO 9001 certification copies and any relevant test reports such as ASTM D412 for tensile testing or ASTM D624 for tear strength.

Typical minimum order quantities range from one full roll (approximately 500 m) for conveyor belts to 200 m for PTFE coated fabrics, with lead times of 4‑6 weeks after order confirmation. Buyers should confirm packaging details - e.g., inner cardboard cores, outer stretch wrap, and pallet dimensions - to ensure safe transport. Prior to shipment, request a pre‑shipment inspection report or third‑party lab certification to validate compliance with the specified standards.

What types of conveyor belts does Bombino offer?

Bombino lists fabric‑reinforced rubber or PVC conveyor belts in widths from 300 mm to 2000 mm and thicknesses between 2 mm and 15 mm, suitable for continuous material handling.

How is the PTFE coating on the fiberglass belt specified?

The PTFE coating is typically described by its thickness (0.05‑0.20 mm) and its temperature class, commonly up to 260 °C, providing chemical resistance and low friction.

What certifications should a buyer request for these belts?

Buyers should ask for ISO 9001 quality‑management certification, ISO 14001 environmental certification, and any product‑specific test reports such as ASTM D412 for tensile strength or REACH compliance for EU shipments.

What is the usual packaging for compactor felts?

Compactor felts are shipped on flat rolls, wrapped in stretch film, and palletized on wooden pallets, with container loading in standard 20‑ft or 40‑ft containers.

Which HS codes are applicable to Bombino’s product categories?

The belts and felts fall under HS Chapter 40 (rubber and plastics products), while adhesive tapes are classified under HS Chapter 39 (plastics and articles thereof).

What are the typical lead times and minimum order quantities?

Lead times are generally 4‑6 weeks after order confirmation; minimum order quantities are around one full roll (≈500 m) for conveyor belts and about 200 m for PTFE coated fabrics.

How can a buyer verify temperature resistance of PTFE coated products?

Request a test report showing performance at the specified temperature class (e.g., 260 °C) and PTFE coating thickness, often based on ASTM D1248 or similar standards.