About Belong Blasting Technology Co., Ltd. - Abrasives Supplier in China

China‑based Belong Blasting Technology Co., Ltd. lists 15 active products under the Abrasives and Light & Medium Machinery categories. The catalogue includes Steel Shot (HS 7326.90) made from chrome‑alloy steel, High Carbon Steel Shot S390 (HS 7205.10) of high‑carbon chrome alloy, Casting Steel Shot S460 for shot peening (HS 7205.10), Shot Blasting Media S550, Metal Abrasive Media for Surface Treatment (HS 7204.49), and a range of steel grit products such as Bearing Steel Grit G18, Grit Blasting Media G40, Steel Abrasive Media G50 and standard Steel Grit. Additional entries cover Stainless Steel Shot variants (SUS304, SUS410, SUS430, SUS201/202) all classified under HS 7205.10, as well as several items without explicit HS codes but clearly part of the shot and grit family.

Product Range and Specialties of Belong Blasting Technology Co., Ltd.

The product set spans common shot‑peening and abrasive‑blasting grades. Steel Shot grades such as S250‑S650 and G‑grades (G18, G40, G55, G80) are typically sized 0.2‑5 mm and hardened to 45‑65 HRC, meeting ISO 11125‑1/‑2 specifications. High‑carbon steel shot (S390) and casting steel shot (S460) are used where higher impact energy is required, while stainless‑steel shots (SUS304, SUS410, SUS430) provide corrosion‑resistant options for food‑processing or medical equipment. Bearing steel grit G18 corresponds to SAE 52100 (high‑carbon chromium) and is often supplied in 25 kg bags or bulk bulk bags for automotive component finishing. Chinese manufacturers usually conform to ASTM A108 (steel shot) and ASTM A425 (grit) standards, offering particle‑size distribution charts, hardness, and chemical composition certificates. Packaging options include 25 kg polypropylene bags, 500 kg bulk bags, and 20 ft containers capable of holding roughly 800 bags.

Trade and Export Information - Belong Blasting Technology Co., Ltd.

China is a leading exporter of abrasive media, with primary destinations in Southeast Asia, the European Union, the United States and the Middle East. The HS‑code families 7204 (abrasive grains, sand and similar mineral products) and 7205 (granules, powders and other articles of steel) cover most of the listed items, while 7326.90 captures steel shot as a separate chapter. Importers typically require ISO 9001 quality‑management certification, ISO 14001 environmental compliance, and product‑specific standards such as CE marking for EU markets or ASTM A108/A425 for North America. Common logistics involve FOB Shanghai or Ningbo ports, with CIF terms used for larger contracts. Bulk shipments are usually loaded in 20‑ft or 40‑ft containers, and moisture content is kept below 0.5 % to prevent corrosion during transit.

Sourcing from Belong Blasting Technology Co., Ltd. - Buyer Guidance

Prospective buyers should request a material test report that lists carbon, chromium and other alloying elements, along with hardness (HRC) and particle‑size distribution per ISO 11125. Verification of ISO 9001 certification, an MSDS for each alloy, and compliance certificates for ASTM A108 or ASTM A425 are standard due diligence steps. Samples are typically supplied in a 25 kg bag; buyers often confirm sizing and hardness before placing a full order. Minimum order quantities often start at 5 metric tons, with lead times of 30‑45 days after sample approval, though larger bulk orders may benefit from negotiated production schedules.

What types of abrasive media does Belong Blasting Technology list?

The catalogue includes steel shot, high‑carbon steel shot S390, casting steel shot S460, shot blasting media S550, metal abrasive media, several steel‑grit grades (G18, G40, G50) and stainless‑steel shot variants (SUS304, SUS410, SUS430, SUS201/202).

Which HS codes apply to the listed products?

Products are classified under HS 7326.90 for steel shot, HS 7205.10 for high‑carbon and stainless‑steel shots, and HS 7204.49 for various steel‑grit and metal abrasive media.

What material specifications are typical for the steel shot offered?

Steel shot is usually made from chrome‑alloy steel with carbon 0.8‑1.2 %, chromium 0.3‑0.8 % and hardness between 45‑65 HRC, conforming to ISO 11125‑1.

Are certifications available for these abrasive products?

The supplier does not list specific certifications, so buyers should request ISO 9001, ISO 14001, and product‑specific ASTM A108 or ASTM A425 certificates before purchase.

What are common packaging formats and container loads?

Typical packaging is 25 kg polypropylene bags, bulk bags of 500 kg, or palletized bags. A 20‑ft container can hold roughly 800 bags of 25 kg each.

What is the usual minimum order quantity and lead time?

Minimum order quantities are generally around 5 metric tons, with a production and delivery lead time of 30‑45 days after sample acceptance.