About Baoji Xinglong Titanium Industry Co., Ltd - Titanium Sheet Supplier in China

China‑based Baoji Xinglong Titanium Industry Co., Ltd lists nine distinct titanium products in its catalogue. The portfolio includes titanium flanges, wire, rings, bars, tube plates, blocks, sheets, discs and a specialised OD 25 TC4 bar, with HS codes mainly in chapter 81.09 (8108.90) for articles such as flanges and wire and chapter 81.08 (8108.20) for bars, blocks and discs. Each entry specifies the alloy grade, ranging from commercially pure titanium (CP Ti) grades 1‑4 to alloy grades such as Ti‑6Al‑4V (Grade 5) and Ti‑0.15Pd (Grade 7).

The catalogue distinguishes material grades for each product: titanium sheet and flange are offered in Grade 2 (CP) and Grade 5 (Ti‑6Al‑4V); wire is supplied as CP Ti or alloy; bars and blocks are available in CP grades 1‑3, Ti‑6Al‑4V and the TC4 alloy composition of 6 % Al, 4 % V, ≤0.3 % Fe and ≤0.2 % O. These specifications align with common industrial uses such as aerospace, chemical processing and medical device fabrication.

Product Range and Specialties of Baoji Xinglong Titanium Industry Co., Ltd

The listed products cover standard forms used across the titanium market. Titanium sheet, typically supplied to ASTM B265, is offered in both commercially pure (Grade 2) and alloy (Grade 5) conditions, with common thicknesses from 0.5 mm to 12 mm and widths up to 2 m. Titanium bar, classified under ASTM B348, includes round, square and hexagonal sections, often sized from 6 mm to 200 mm in diameter or width, and heat‑treated to achieve tensile strengths of 340 - 950 MPa depending on grade. Wire, conforming to ASTM B265‑W, is usually produced in diameters of 0.2 mm to 5 mm and may be drawn to fine tolerances for spring or medical applications. Flanges, rings and tube plates are machined from sheet or plate blanks and are commonly supplied with drilled holes or milled profiles to fit piping systems. The OD 25 TC4 bar reflects a specialised alloy (Ti‑6Al‑4V) used where higher strength and corrosion resistance are required, often supplied in lengths up to 6 m.

Trade and Export Information - Baoji Xinglong Titanium Industry Co., Ltd

China is one of the world’s largest exporters of titanium alloys, and shipments from Chinese manufacturers frequently target North America, the European Union, Japan and South Korea, where aerospace, automotive and chemical industries source high‑performance titanium. HS code 8108.90 covers "other articles of titanium" such as flanges, wire, rings and tube plates, while HS code 8108.20 covers "bars, rods and profiles" including bars, blocks and discs. Buyers typically request ISO 9001 quality management certification, ASTM or AMS material certifications, and mill test reports that detail chemical composition and mechanical properties. Export logistics often use FOB Shanghai or Ningbo, with cargo packed in wooden crates or bulk pallets for 20‑ft and 40‑ft containers; moisture‑proof liners are common to prevent oxidation during sea transit.

Sourcing from Baoji Xinglong Titanium Industry Co., Ltd - Buyer Guidance

When sourcing titanium from Baoji Xinglong, request a current Mill Test Report (MTR) that confirms grade, chemical analysis (e.g., Al 6 %, V 4 % for TC4) and tensile properties per ASTM B265 or B348. Verify that the supplier can provide certification to ASTM, AMS or EN standards required for your end‑use, especially for aerospace or medical applications where traceability is mandatory. Confirm dimensions, tolerance (typically ±0.1 mm for sheet thickness, ±0.2 mm for bar diameter) and surface finish (e.g., mill finish or polished) before finalising the order. Arrange for a sample shipment in standard packaging (e.g., wooden crate with internal cushioning) and request the sample to be accompanied by the same MTR for consistency checks.

What titanium grades are available for sheet and bar products?

Sheet is offered in Grade 2 (commercially pure) and Grade 5 (Ti‑6Al‑4V). Bar is supplied in CP grades 1‑3, Grade 5 (Ti‑6Al‑4V) and the TC4 alloy (6 % Al, 4 % V).

Which HS codes apply to the listed products?

Products such as flanges, wire, rings and tube plates use HS 8108.90, while bars, blocks, discs and the OD 25 TC4 bar fall under HS 8108.20.

What certifications should a buyer request for titanium alloy orders?

Request ISO 9001 for the quality system, ASTM or AMS material certifications, and a Mill Test Report showing chemical composition and mechanical properties.

What are typical minimum order quantities (MOQ) for titanium sheet?

MOQs vary by thickness and size, but suppliers often require at least one standard pallet (approximately 1 ton) for sheet orders.

What lead time is common for these titanium products?

Standard lead times range from 4 to 8 weeks after order confirmation, depending on grade, dimensions and current production load.

How are the products packaged for international shipment?

Items are usually packed in wooden crates or bulk pallets with internal cushioning and moisture‑proof liners, suitable for 20‑ft or 40‑ft containers.

Which markets typically import Chinese titanium products?

Key import markets include the United States, Germany, the United Kingdom, Japan, South Korea and Canada, especially for aerospace, medical and chemical processing sectors.

What documentation is needed for customs clearance of HS 8108.90 items?

Customs generally require a commercial invoice, packing list, certificate of origin, and the Mill Test Report; some destinations may also request an import license for aerospace‑grade titanium.