About Baoji Ruirong Manufactory Co., Ltd. - Titanium & Zirconium Supplier in China

China‑based Baoji Ruirong Manufactory Co., Ltd. lists nine active products across titanium, graphite and zirconium families. The catalogue includes titanium rods, multiple titanium bar specifications (commercial pure Grade 2 and alloy Grade 5/TC4) and two zirconium crucible types, each identified with HS‑code families 8103, 8108 and 8109. The supplier’s top categories are recorded as Titanium Bar, Graphite, Titanium Rod and Zirconium, reflecting a focus on high‑performance metal components for industrial use.

The product set comprises Zirconium Zr702 Crucible 10 ml (HS 8103.20, commercial‑pure Zr702), Titanium Rod B348 Gr5 6 mm (HS 8108.20, Ti‑6Al‑4V Grade 5), Titanium Bar B348 GR2 6 mm (HS 8108.20, CP‑Ti Grade 2, ASTM B348), several TC4 alloy bars in 6 mm, 8 mm and 20 mm formats (HS 8108.20 or 8108.90) and a general Zirconium Crucible (HS 8109.90, Zr‑1, Zr‑3, Zr‑5 alloys). Dimensions range from 6 mm diameter rods to 3000 mm long bars, and crucibles are supplied in 10 ml capacity, indicating suitability for laboratory‑scale melting and precision machining applications.

Product Range and Specialties of Baoji Ruirong Manufactory Co., Ltd.

The catalogue presents titanium products that conform to ASTM B348 for commercial‑pure Grade 2 and to the Ti‑6Al‑4V alloy specifications (Grade 5, TC4) commonly referenced in ISO 5832‑1 for medical implants. Typical industry grades for titanium bars include CP‑Ti Grade 2 (≈99.2 % Ti) and alloy Grade 5 (≈90 % Ti, 6 % Al, 4 % V) with tensile strengths of 880‑950 MPa and elongation of 10‑15 %. Zirconium crucibles are offered in commercial‑pure Zr702 and alloy families (Zr‑1 to Zr‑5), which in the wider market meet purity levels above 99.5 % and are used for high‑temperature melting of reactive metals.

In practice, buyers of these materials often specify surface finish (e.g., mill finish or polished), dimensional tolerances (±0.05 mm for small bars, ±0.1 mm for long sections), and packaging such as wooden crates with internal cushioning for 20‑ft or 40‑ft containers. Standard certifications requested include mill test reports (MTR) aligned to ASTM or ISO, and third‑party chemical analysis certificates. For zirconium crucibles, thermal shock resistance and maximum operating temperature (typically up to 1 800 °C) are key performance parameters.

Trade and Export Information - Baoji Ruirong Manufactory Co., Ltd.

China is a major exporter of titanium alloy products and zirconium alloys, with primary destinations in Europe, North America and Southeast Asia for aerospace, medical device and chemical processing applications. HS‑code 8108 covers titanium bars and rods, while 8103 and 8109 address zirconium crucibles; customs authorities often require a detailed commodity description, country of origin marking and a commercial invoice referencing these codes.

Typical importers request ISO 9001 quality‑management certification, ISO 14001 environmental compliance and, for medical‑grade titanium, ISO 13485. Export logistics commonly use FOB or CIF terms, with products packed in wooden crates, shrink‑wrapped pallets or stainless‑steel containers to protect against moisture and mechanical impact. Container loading rates range from 12‑15 tonnes for 20‑ft containers to 22‑24 tonnes for 40‑ft containers, depending on bar length and weight.

Sourcing from Baoji Ruirong Manufactory Co., Ltd. - Buyer Guidance

Buyers should request a current Mill Test Report that lists chemical composition, mechanical properties and compliance with ASTM B348 or ISO 5832‑1 for titanium, and with ASTM B381 for zirconium. Verification of dimensions, tolerance grades and surface finish should be confirmed against the supplier’s technical data sheet before order placement. Requesting a pre‑shipment inspection report (e.g., SGS or Bureau Veritas) and confirming packaging details helps mitigate damage during transit.

What titanium grades are available from Baoji Ruirong?

The supplier lists Commercial‑Pure Titanium Grade 2 (ASTM B348) and Ti‑6Al‑4V alloy Grade 5/TC4, both covered under HS 8108.20 or 8108.90 depending on the product format.

Which zirconium purity levels are offered?

Zirconium Zr702 crucibles are commercial‑pure grade, while the broader Zirconium Crucible line includes alloys Zr‑1, Zr‑3 and Zr‑5, typically exceeding 99.5 % Zr purity.

What documentation should a buyer request?

Ask for a Mill Test Report, chemical analysis certificate, and, where relevant, ISO 9001 or ISO 13485 compliance certificates. For large shipments, a pre‑shipment inspection report is advisable.

Is there a minimum order quantity (MOQ) for the titanium bars?

The catalogue does not state an MOQ; buyers usually negotiate based on bar length (e.g., 3000 mm) and weight, with typical orders ranging from a single bar to full container loads.

What are the typical packaging and shipping methods?

Products are normally packed in wooden crates with internal cushioning, suitable for 20‑ft or 40‑ft containers. FOB or CIF Incoterms are commonly used for export from China.

What lead time can a buyer expect?

Lead times depend on product dimensions and order size, but standard production and export cycles for titanium bars and zirconium crucibles usually range from 4 to 8 weeks.

Which certifications are commonly required for these metals?

Importers often require ISO 9001 quality‑management certification, ISO 14001 environmental compliance, and for medical‑grade titanium, ISO 13485. Specific grade certificates (ASTM B348, ISO 5832‑1) are also standard.

How are the products classified for customs?

Titanium rods and bars fall under HS 8108, zirconium crucibles under HS 8103 (for pure zirconium) or HS 8109 (for alloy crucibles). Accurate HS‑code declaration is essential for customs clearance.