About Andlink Electronics Co., Ltd. - Computer Cables Supplier in China

China is the origin of Andlink Electronics Co., Ltd., which currently lists five active products in its catalogue. The supplier focuses on computer cables, offering a Mini DisplayPort cable, a USB‑to‑TTL‑232R‑5 V cable, a dual USB‑A female panel‑mount connector designed for motherboard integration, a USB 3.0 A female panel‑mount cable, and a male‑to‑male HDMI cable. Each item falls under the broader computer‑cable category and is identified by its specific connector type and intended application. The catalogue does not provide HS codes, but the products correspond to the standard cable families used in electronic assemblies.

The five listed items cover both data‑transfer and video‑signal interfaces that are common in desktop, industrial and embedded systems. The Mini DisplayPort cable supports up to 8.1 Gbps video bandwidth, the USB‑to‑TTL cable converts USB 2.0 signals to 5 V TTL levels, the dual USB‑A panel mount provides two female connectors for internal routing, the USB 3.0 panel‑mount cable is rated for 5 Gbps high‑speed transmission, and the HDMI M/M cable carries up to 4 K video at 60 Hz. These specifications reflect typical industry grades for such connectors, such as USB 2.0 (480 Mbps) and USB 3.0 (5 Gbps) standards, and HDMI 1.4/2.0 compliance for video cables.

Product Range and Specialties of Andlink Electronics Co., Ltd.

Andlink’s catalogue includes a Mini DisplayPort cable, a USB‑to‑TTL‑232R‑5 V adapter cable, a dual USB‑A female panel‑mount assembly, a USB 3.0 A female panel‑mount cable, and a male‑to‑male HDMI cable. In the computer‑cable market, Mini DisplayPort cables are typically available in lengths from 0.5 m to 2 m, with shielding conforming to IEC 61000‑4‑2 for electrostatic discharge protection. USB‑to‑TTL cables are used for firmware flashing and serial communication, commonly featuring a 5 V logic level and a 1 m standard length. Panel‑mount USB cables are usually supplied in bulk reels or pre‑cut lengths, with strain‑relief housings and a rated current of 1 A per connector.

Industry standards for USB 3.0 cables require a minimum of 90 Ω differential impedance, shielding effectiveness of at least 30 dB, and data‑rate certification by the USB‑IF. HDMI cables are graded by the HDMI Specification (e.g., HDMI 1.4, 2.0) and are often tested for bandwidth up to 18 Gbps, supporting 4 K@60 Hz and HDR signals. Typical certifications sought by buyers include CE marking, RoHS compliance for restricted substances, and FCC Part 15 for electromagnetic compatibility. Materials such as oxygen‑free copper conductors and PVC or LSZH (low‑smoke, zero‑halogen) jackets are common in the segment.

Trade and Export Information - Andlink Electronics Co., Ltd.

China is a major exporter of computer and connectivity cables, with shipments frequently directed to North America, Western Europe, and emerging markets in Southeast Asia. The HS chapter 8544 (insulated wire, cable and other conductors) commonly covers the types listed by Andlink, and customs authorities often request test reports that confirm compliance with IEC and UL standards. Buyers typically require documentation such as a Declaration of Conformity, CE or FCC test certificates, and a RoHS statement before loading the cargo.

Logistically, these cables are lightweight and are usually packed in cardboard boxes or shrink‑wrapped on pallets, allowing efficient 20‑ft or 40‑ft container loading. Incoterms such as FOB Shanghai or CIF destination port are standard for Chinese cable exporters. Export controls in China mandate that electronic components meet the national quality supervision system, and many suppliers obtain a Chinese Export License for electronics.

Sourcing from Andlink Electronics Co., Ltd. - Buyer Guidance

Prospective buyers should request product datasheets that specify connector pinouts, cable length, impedance, shielding class, and temperature rating. For the USB‑to‑TTL cable, a serial communication test report confirming correct voltage conversion and signal integrity is advisable. The Mini DisplayPort and HDMI cables benefit from a video‑signal integrity test, such as an eye‑diagram analysis, to verify compliance with the relevant HDMI or DisplayPort standards.

Verification of certifications is essential; ask for CE, RoHS, and, where applicable, FCC or UL test certificates. Confirm packaging details - whether the cables are supplied individually, on reels, or bulk‑packed - to align with your warehouse handling. Lead times for custom lengths or bulk orders are typically 2 - 4 weeks, and minimum order quantities often start at 500 units per SKU, though larger volumes may reduce per‑unit shipping weight.

What connector types does Andlink supply?

Andlink lists five cable types: a Mini DisplayPort cable, a USB‑to‑TTL‑232R‑5 V cable, a dual USB‑A female panel‑mount assembly, a USB 3.0 A female panel‑mount cable, and a male‑to‑male HDMI cable. Each product is described by its connector type and intended application.

Are the USB cables compliant with USB‑IF standards?

The USB 3.0 panel‑mount cable is rated for 5 Gbps and meets the USB‑IF differential impedance and shielding requirements. The USB‑to‑TTL cable follows USB 2.0 electrical specifications for 480 Mbps data rates.

Which certifications should a buyer request for these cables?

Buyers typically request CE marking, a RoHS compliance statement, and where applicable FCC Part 15 or UL test reports to verify electromagnetic compatibility and safety. These documents confirm that the cables meet common international regulatory standards.

What are the common packaging methods for these computer cables?

Cables are usually packed in sturdy cardboard boxes, shrink‑wrapped on pallets, or supplied on reels for panel‑mount variants. This packaging facilitates efficient loading into 20‑ft or 40‑ft containers for ocean freight.

Which HS code family applies to the listed products?

Computer and connectivity cables fall under HS chapter 8544, which covers insulated wire, cable and other conductors. This chapter is used by customs authorities to classify the Mini DisplayPort, USB and HDMI cables.

Which markets import Chinese computer cables most frequently?

The United States, European Union member states, and Southeast Asian countries such as Vietnam and Thailand are the largest importers of Chinese computer cables. These regions source cables for consumer electronics, industrial equipment and data‑center infrastructure.

What typical lead time and minimum order quantity apply?

Standard lead times are 2 - 4 weeks for stocked items, with a typical minimum order quantity of 500 units per SKU. Custom lengths or specialized specifications may require longer production cycles and higher order volumes.