About A. R. International - Brass Handicrafts Supplier in India

India‑based A. R. International lists 164 active products across several categories, including Brass Handicrafts, Canned Vegetables, Candle Holders and Garden & Outdoor Furniture. The catalogue features items such as Enamel Trays, Copper Bowls, Cutlery Sets, Storage Boxes, Cake Domes, 3‑Tier Cake Stands, various Vases, Coffee and Accent Tables, Aladdin Lamp Menorahs, Brass Menorahs, and a range of metal and aluminium stool and table designs. Several entries carry HS codes that place them in the metal goods chapter, for example T‑Light Holders under HS 7418.20 and Pillar Holders under HS 8306.29. The product set also includes multiple brass candle holders classified under HS 7419.99 and aluminium candle holders under HS 7615.10 and 7615.19, reflecting a focus on decorative metal and alloy items.

The material specifications disclosed in the facts show brass items made from a copper‑zinc alloy (approximately 70 % Cu, 30 % Zn) and aluminium pieces with finishes ranging from polished to gold‑plated. Brass items such as the Hanging Incense Burner and Candle Sticks Holder are recorded with HS 7419.99, while aluminium round stools and wall sconces fall under HS 7615.19 and 9405.29 respectively. These classifications align with standard tariff headings for decorative metalware, providing clear guidance for customs processing and duty assessment.

Product Range and Specialties of A. R. International

The catalogue enumerates concrete product types: enamel‑coated serving trays, copper bowls, multi‑piece cutlery sets, storage boxes, cake domes and stands, decorative vases, coffee and accent tables, and a variety of candle and incense holders in brass and aluminium. In the broader industry, brass handicrafts are typically produced from Cu‑Zn alloys meeting ASTM B16 specifications, with surface finishes measured in microns of polish and lead content limited to 0.05 % or lower for consumer safety. Aluminium decorative items often conform to EN 573‑3 for composition and may be anodised or gold‑plated to meet aesthetic standards. Buyers commonly request material certificates, finish tolerance sheets and, where applicable, compliance with RoHS limits for hazardous substances.

Typical grades for metal decorative goods include brass grade C260 (Cu ~ 62 %, Zn ~ 38 %) and aluminium alloy 6063 for lightweight tables and stools. Packaging for such items usually involves double‑wall cardboard boxes with interior foam inserts or wooden crates for larger tables, ensuring protection during sea freight.

Trade and Export Information - A. R. International

India is a major exporter of metal handicrafts, with the European Union, United States, and Gulf Cooperation Council countries representing the largest import markets for brass and aluminium decorative items. HS chapters 74 (precious metal work) and 83 (miscellaneous articles of base metal) dominate customs filings for these products, and buyers often require CE marking for EU shipments and ISO 9001 certification to verify quality management systems. Shipping is commonly arranged on 20‑ft or 40‑ft containers using FOB or CIF terms; pallets are stacked to a maximum height of 2.2 m to meet container weight limits. Indian exporters frequently provide phytosanitary certificates for wooden packaging and may need to comply with the EU REACH regulation for metal alloys used in consumer goods.

Regulatory checks frequently include lead‑content analysis (per ASTM B193) and surface finish verification (ISO 1302). Importers in the US may request ASTM B117 corrosion testing for outdoor furniture, while GCC buyers often look for GCC‑S 009 compliance for decorative metalware.

Sourcing from A. R. International - Buyer Guidance

When sourcing from A. R. International, buyers should request an alloy composition certificate confirming the copper‑zinc percentages for brass items and the specific aluminium alloy designation for aluminium pieces. A surface‑finish report (e.g., ISO 1302) and a lead‑content test result are standard documents for decorative metal goods intended for indoor use. Samples of representative items such as a brass candle holder and an aluminium table are advisable before committing to larger orders, allowing verification of finish quality and dimensional tolerances.

Typical minimum order quantities in this segment range from 100 to 250 pieces per design, with lead times of 30‑45 days after design approval and receipt of required test reports. Buyers should confirm packaging details - double‑wall cartons with foam inserts for small items or wooden crates for tables - to mitigate damage during transit.

What product categories does A. R. International list in its catalogue?

The supplier lists metal and enamel items such as serving trays, copper bowls, cutlery sets, storage boxes, cake domes, vases, coffee and accent tables, brass and aluminium candle holders, incense burners and outdoor furniture.

Which HS codes are associated with the brass candle holders?

Brass candle holders are recorded under HS 7419.99, while the related brass candle sticks fall under HS 8306.10.

What material is used for the Pillar Holder and what is its HS code?

The Pillar Holder is made of aluminium and is classified under HS 8306.29.

Are material composition certificates available for the brass items?

The facts specify the brass alloy composition (approximately 70 % copper, 30 % zinc), and buyers can request a formal material certificate confirming these percentages.

What typical certifications should a buyer request for these metal handicrafts?

Buyers usually request ISO 9001 quality‑management certification, a lead‑content test report (ASTM B193), and, for EU shipments, CE marking or REACH compliance documentation.

What are common packaging methods for the tables and larger metal items?

Larger tables are generally packed in wooden crates with interior padding, while smaller items like candle holders are shipped in double‑wall cardboard boxes with foam inserts.

What is a typical minimum order quantity and lead time for these products?

Minimum order quantities typically start at 100 pieces per design, with lead times of 30‑45 days after design approval and receipt of required test reports.

Which regions most frequently import Indian metal handicrafts?

The United States, European Union members and Gulf Cooperation Council countries are the primary import markets for Indian brass and aluminium decorative goods.