Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The VP454965-2P from Vcell Power Co., Limited is a prismatic lithium polymer cell rated at 3.7V nominal with a 3000mAh capacity, configured as a 2P (two-cell parallel) pack. Its dimensions derive from the 454965 form factor, approximately 4.5mm thick, 49mm wide and enumerated 65mm in length, though buyers should confirm exact mechanical drawings for their enclosure design. The cell operates between a 4.2V charge cut-off and a 2.75V discharge cut-off, with standard charge current set at 560mA and maximum charge current at 1.4A.
The battery uses a lithium-ion polymer electrolyte system rather than a liquid electrolyte, permitting flexible form factors and reduced weight compared to cylindrical alternatives. Its 2P configuration doubles the capacity of a single 454965 cell while maintaining the same nominal voltage, a common approach for tablets, portable monitors, and industrial handheld terminals. The 15.0A peak discharge rating (noted as 700 wire/connector, TBD) suggests suitability for moderate pulse loads, though continuous draw should stay within the 5.6A maximum to preserve cycle life and thermal stability.
Buyers in consumer electronics, IoT hardware, and portable medical device sectors typically source this cell for integration into battery management systems with passive or active balancing. The TBD wire and connector specification indicates that Vcell Power supplies bare cells or unfinished packs for OEMs to terminate according to their PCB and housing requirements. Importers should confirm whether UN38.3 test reports, MSDS documentation, and IEC 62133 compliance certificates accompany the shipment, as these are mandatory for air freight and customs clearance of lithium cells from China.
| Nominal Voltage | 3.7V |
| Nominal Capacity | 3000mAh |
| Cell Configuration | 2P (two-cell parallel) |
| Form Factor (typical industry dimensions for 454965 code) | approx. 4.5 x 49 x 65mm (standard prismatic LiPo sizing; confirm exact drawing with supplier) |
| Charge Cut-Off Voltage | 4.2V |
| Discharge Cut-Off Voltage | 2.75V |
| Standard Charge Current | 560mA |
| Maximum Charge Current | 1.4A |
| Max Continuous Discharge Current | 5.6A |
| Peak Discharge Current | 15.0A (700 wire/connector: TBD) |
Vcell Power Co., Limited maintains a registered address at Room 2-308, Pengchengzhongjun Compass Innovation Industrial Park in Bao An District, Shenzhen, Guangdong Province, postal code 518100. The supplier holds a harbor trust tier on the platform, with a response rate currently showing 0.00 and zero recorded average response hours. This profile does not state years in operation, factory floor space, employee headcount, revenue figures, or named clientele, so buyers should treat these as unverified and request direct disclosure.
The listing positions Vcell Power as a source of VCELL-branded or OEM-labelled lithium polymer cells for B2B buyers integrating batteries into finished goods. No ISO 9001, ISO 14001, or IATF 16949 certifications are mentioned in the available data, nor are specific export markets or compliance portfolios beyond the general reference to global safety and export compliance. Buyers should ask directly for the supplier's quality management system scope, internal testing capabilities (including cyclic ageing and impedance tracking), and whether they offer cell matching and pack assembly services beyond bare cell supply.
This 3.7V 3000mAh 454965-2P Lithium Polymer Battery is a premium-grade rechargeable power cell suitable for portable electronics, IoT devices, wearables, and consumer tech products. With a nominal voltage of 3.7V and charge/discharge cut-off thresholds of 4.2V and 2.75V respectively, the battery delivers stable and reliable performance throughout its cycle life. Ideal for B2B buyers sourcing battery components for product manufacturing,OEM supply chains, and international trade, this cell is manufactured under strict quality standards to meet global safety and export compliance requirements.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with Vcell Power Co., Limited, buyers should verify that the supplier holds valid UN38.3 test reports for the exact VP454965-2P model number, not a similar variant. Request third-party inspection of cell dimensional tolerances, particularly thickness, because even 0.2mm deviation can prevent fitment in ultrathin device housings. Confirm that the supplier's quality agreement covers capacity sorting, impedance matching between parallel cells, and visual defect criteria such as electrode tab alignment and pouch seal integrity.
Logistics arrangements from Shenzhen typically involve EXW or FOB Shenzhen terms, though the listing does not specify Incoterms. Buyers should confirm whether the supplier can deliver cells at 30-50% state of charge to comply with IATA dangerous goods regulations for air transport, or whether sea freight is preferred for cost reduction. Payment terms often require 30% deposit with 70% against bill of lading for new relationships, but this must be negotiated directly. Lead time and production scheduling are not stated, so buyers should request firm quotes with capacity allocation and holiday blackout dates for Chinese New Year and Golden Week.
On receipt, conduct incoming inspection including open-circuit voltage measurement (expect 3.6-3.8V if stored correctly), visual check for pouch swelling or electrolyte leakage, and spot capacity testing on a sample lot using a programmable battery analyser. Ask Vcell Power for the certificate of conformity, material composition declaration for RoHS and REACH, and whether lot traceability codes are laser-marked on each cell. Retain documentation for any warranty claims, as cell performance disputes often require evidence of handling, storage conditions, and charge protocol compliance.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing 3.7v 3000mah 454965-2p Rechargeable Lipo Battery for your business, securing the right balance of quality and cost is essential. Vcell Power Co., Limited, a verified supplier based in China, offers this product with key specifications including Rechargeable Lithium Polymer Battery (LiPo), 3.7V, and 3000mAh. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $1.504.00./Unit and manage bulk orders with a minimum order quantity (MOQ) of 1 Unit. This product is actively traded under HS Code 8507.60, making it a staple in the Batteries & Chargers sector with strong demand from importing countries worldwide.
Importing 3.7v 3000mah 454965-2p Re requires careful attention to shipping logistics, customs compliance, and secure payment terms. Vcell Power Co., Limited offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 8507.60 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this 3.7v 3000mah 454965-2p Re has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Batteries & Chargers category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing 3.7v 3000mah 454965-2p Re requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 8507.60 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for 3.7v 3000mah 454965-2p Rechargeable Lipo Battery from Vcell Power Co., Limited is $1.504.00./Unit on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Vcell Power Co., Limited through EximNext.
The supplier, Vcell Power Co., Limited, has set a Minimum Order Quantity (MOQ) of 1 Unit for 3.7v 3000mah 454965-2p Re. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, 3.7v 3000mah 454965-2p Rechargeable Lipo Battery is classified under HS Code 8507.60. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import 3.7v 3000mah 454965-2p Re from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Vcell Power Co., Limited. Ensure you have the necessary import licenses for Batteries & Chargers products in your destination country.
Yes, Vcell Power Co., Limited is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for 3.7v 3000mah 454965-2p Rechargeable Lipo Battery supplied by Vcell Power Co., Limited include Rechargeable Lithium Polymer Battery (LiPo), 3.7V, and 3000mAh. For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Vcell Power Co., Limited offers 3.7v 3000mah 454965-2p Re with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
3.7v 3000mah 454965-2p Re is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Vcell Power Co., Limited through our platform.
Vcell Power Co., Limited maintains international quality certifications. These ensure that the 3.7v 3000mah 454965-2p Re meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Vcell Power Co., Limited will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Vcell Power Co., Limited.
Discover more products in Batteries & Chargers from verified suppliers worldwide.