Import 3.7v 260mah 501250 Lithium Polymer Battery — Buy in wholesale FOB from Supplier in China

The VP501250 from Vcell Power Co., Limited is a prismatic lithium polymer cell with a nominal 3.7 V and 260 mAh capacity, sized at 5.2 mm thick by 12.5 mm wide by 52.5 mm long including the protection circuit module. The cell uses lithium polymer composite chemistry in a flexible aluminium-laminate pouch construction, with a charge cut-off of 4.2 V and discharge cut-off of 2.75 V. Maximum charge current is 1.0C (260 mA), standard discharge is 0.2C (52 mA), and maximum continuous discharge is 1.5C (390 mA) with a 5.0C (1.3 A) peak discharge capability. Operating temperature spans 0°C to 45°C for charging and -20°C to 60°C for discharge. Cell weight with PCM is approximately 6 g, and the wire and connector configuration is to be determined at order.

The 5.0 mm × 12.0 mm × 50.0 mm bare cell form factor (5.2 × 12.5 × 52.5 mm with PCM) places this in the ultra-thin LiPo category commonly used in wearables, IoT sensors, and compact medical devices where z-height is constrained. The 1.5C continuous and 5.0C peak discharge rates are typical for small-capacity LiPo cells, though actual thermal performance depends on ambient conditions and enclosure design. The 2.75 V discharge cut-off is slightly conservative compared to some competitors that allow 2.5 V, which may extend usable capacity in low-drain applications but should be confirmed against your device's undervoltage lockout threshold. Vcell Power Co., Limited offers this under VCELL or OEM branding, indicating private-label capability.

Target buyers include original equipment manufacturers in consumer electronics, medical device developers, and IoT hardware companies requiring customised cell geometries and connector configurations. The 260 mAh capacity suits Bluetooth peripherals, fitness trackers, and compact GPS modules where daily or weekly charging cycles are acceptable. Lead time, MOQ, and unit pricing are not stated in the source and must be confirmed directly with Vcell Power Co., Limited. Buyers should also clarify whether the PCM includes overcharge, over-discharge, and overcurrent protection, or if additional protection is required at the system level.

Vcell Power Co., Limited operates from Room 2-308, Pengchengzhongjun Compass Innovation Industrial Park, Bao An District, Shenzhen, 518100, China. The supplier holds a Harbor trust tier, and like the first listing, shows a 0.00 response rate with zero average response hours on the platform. This absence of response metrics means buyers must initiate direct contact via the provided address or alternative channels to assess communication reliability and technical support capability.

The company markets itself as a battery specialist with OEM/ODM capability, evidenced by the VCELL/OEM dual branding option on the VP501250. No founding year, factory floor space, employee count, revenue figure, or named client list appears in the source data. The Bao An District location places Vcell Power Co., Limited in one of Shenzhen's primary manufacturing zones, with proximity to cell component suppliers and electronics assembly infrastructure. Buyers should request factory audit access, ISO 9001 or IATF 16949 quality certification, and sample turnaround time to validate supplier capability beyond the product specification sheet.