Import 304 - 316 - 202 Stainless Steel Panel — Buy in wholesale FOB from Supplier in India

Pratik Stainless Steel Engineers offers cold-rolled and hot-rolled stainless steel panels across three austenitic grades: 304, 316 and 202. Grade 304 contains 18% chromium and 8% nickel by standard composition, delivering proven corrosion resistance for general industrial atmospheres. Grade 316 adds 2-3% molybdenum, which markedly improves pitting resistance in chloride-rich or marine exposure. Grade 202 substitutes manganese for a portion of the nickel content, reducing raw material cost while retaining sufficient formability for structural fabrications where extreme corrosion resistance is not the primary driver.

The panels are available in standard mill finishes including 2B, BA and No. 4 brushed, with typical thickness ranging from 0.3 mm to 6.0 mm in cold-rolled stock and up to 50 mm in hot-rolled plate. Width commonly spans 1000 mm, 1219 mm and 1500 mm, with lengths of 2000-6000 mm or cut-to-size service through plasma, laser or water-jet processing. ASTM A240 and A480 govern the dimensional tolerances and surface finish requirements for these grades, while EN 10088-2 provides the European parallel. The 316 grade in particular meets the low-carbon 316L specification when dual-certified, which is critical for welded constructions in the as-welded condition to prevent intergranular corrosion.

Buyers in construction, automotive trim, food processing equipment and chemical tank fabrication source these panels for their combination of hygiene, durability and workability. Grade 304 dominates kitchen equipment and architectural cladding, while 316 is specified for coastal structures, pharmaceutical vessels and marine hardware. Grade 202 finds use in railway carriage panels, decorative tubing and lower-budget structural frameworks. Importers should confirm the specific mill test certificate standard the supplier works to, whether JIS G4305, ASTM A240 or an equivalent, and verify that the surface finish matches the end-use hygiene or aesthetic requirement.

Pratik Stainless Steel Engineers is located in Kasurdi, Pune district, Maharashtra, India, with its registered address at Gat No. 343/1 near Junanjai Park. The supplier operates from this single location in western India's prominent stainless steel distribution and fabrication corridor, where Pune's industrial base supports automotive, construction and engineering supply chains. The supplier's trust tier is classified as harbor, and its response rate currently stands at 0.00% with an average response time of 0 hours, indicating either a newly listed profile or limited active engagement on the platform at this time.

The company profile does not state founding year, employee count, annual turnover, specific production capacity, or customeclient list, or international certification holdings such as ISO 9001. What the listing does communicate is a focus on custom-built stainless steel panels across three grades, with explicit mention of fabrication-ready supply and cut-to-size capability. Buyers should treat the supplier as a Pune-based specialist in stainless steel flat products rather than assume integrated mill status, and should conduct direct due diligence on production capability, quality system accreditation and export documentation experience before committing to volume orders.