Import Cold Rolled 202 Stainless Steel Sheet — Buy in wholesale FOB from Supplier in China

Cold Rolled 202 Stainless Steel Sheet from Jiangsu Steel Group Co., Ltd. is a 200 series austenitic grade with reduced nickel content, offering a cost-effective alternative to 304 for applications where moderate corrosion resistance and good formability are sufficient. The material is supplied in cold rolled condition with surface finishes including No.1, 2B, No.4, BA, 8K, HL, Hairline, Mirror, Brush, Polished, and Sand Blast, and is available in thicknesses from 0.4 mm to 4 mm, widths of 1000 mm, 1219 mm, 1220 mm, 1500 mm, and 1800 mm, and lengths of 2000 mm, 2438 mm, 2400 mm, 3000 mm, and 6000 mm. Standard export packaging uses sea-worthy bundles with waterproof paper and wooden pallets, tagged for easy identification of grade and quality.

The 202 grade is part of the 200 series stainless steels, which replace some nickel with manganese to lower cost while maintaining adequate strength and corrosion resistance for indoor or mildly corrosive environments. Typical tensile strength for cold rolled 202 is around 650 MPa, with elongation often exceeding 40%, making it suitable for deep drawing and forming operations. It is commonly used in kitchenware, food processing equipment, construction trim, and automotive components where exposure to harsh chemicals or marine environments is limited. Industry standard tolerances for thickness on cold rolled sheets are usually ±0.05 mm for thicknesses under 2 mm and ±0.1 mm for thicker material.

This product is widely traded internationally, with Jiangsu Steel Group Co., Ltd. offering it as part of a range that includes 304, 304L, 316, 316L, 321, 310S, 309S, 317, 201, 410, 420, 430, and 904L grades. Buyers typically source it for applications such as tanks, cutlery, household hardware, and industrial equipment, where the balance of cost, formability, and corrosion resistance meets their requirements. The material conforms to AISI, ASTM, JIS, EN, DIN, and GB standards, and is available in both hot rolled and cold rolled treatments depending on the end use.

Jiangsu Steel Group Co., Ltd. is a China-based supplier specialising in stainless steel products, with its registered address at 10/F No.257 Siping Road, Hongkou District, Shanghai 200080. The company operates as an imported-tier supplier within the marketplace’s classification system, indicating its role in facilitating cross-border trade for international buyers. Its profile reflects a focus on stainless steel sheets, plates, and coils across multiple grades, including 200, 300, and 400 series materials.

The supplier’s trust tier is categorised as harbor, which suggests a baseline level of verification within the platform’s assessment framework. However, its response rate is currently recorded at 0.00%, with an average response time of 0 hours, indicating that potential buyers should confirm communication channels directly with the supplier before initiating inquiries. The company’s product range includes standard and custom specifications, with cold rolled and hot rolled treatments available for various industrial applications.