Import Car And Cylinder Filling Systems (Skid Systems) — Buy in wholesale FOB from Supplier in Turkey
Similar Products
- SS 4 PCS CANISTER SET ST
- SUPREMOS DIESEL 15W40 SN/CJ4 7L
- SUPREMOS 20W50 SYN BLEND SL/CF 4L
- SUPREMOS 10W40 SEMI SYN SN/CJ-4 (PAO) 4L
- OCTANE BOOSTER
- Petrol ULP95, E10, RON 95/97
- DINOIL 20W/50 TRUCK MULTIGRADE
- Ultra-Low Sulphur Diesel (EN590 10PPM 50PPM)
- Fuel Oil Mazut M100
- Kusoom Kitchen Gas Lighter
- Gasoline ron 91
- Compressor 24liter KD24L
Related Products
- Massey Ferguson Tractor 290 MF 385 MF 390 455
- Massey Ferguson Tractor agricultural machinery
- Continental Conti Coach HA3 All-Position Tire
- Doosan D30-S5 2012 Forklift
- 2015 Mercedes-Benz Cla
- 2014 Mitsubishi Delica D:2
- Best and Cheapest Used 20ft 40ft Container
- 1 Ply Face Mask, Wholesale Facemasks, Disposable Facemask
- Industrial Refinery Piston Valve & Butterfly Valve
- Floor Gold Cleaner
- Toilet and Bathroom Cleaner
- Tempest attar
Trending in this Category
- Compressor 50liter KD50L
- ULTRA‐LOW SULPHUR DIESEL EN590
- New Parsun 60 HP EFI 4 Strok Outboard Motorwith Controls and Tank Complete
- Diesel En590 / 10PPM
- Diesel EN590 10 ppm
- Diesel D2 10ppm/ 50ppm
- Compressor 2A 12V 135MM Mounting
- PSA Industrial Oxygen Generator/System
- AVIATION KEROSENE JP54
- COVNA DN20 DN25 1 2 3 Inch Brass Water Air Gas 24V 12V Solenoid Valve
- DN15 1/2 inch 2 Way 12VDC Brass Normally Close NC Solenoid Valve gas
- EN 590 10 ppm Diesel
Top Suppliers for this Product
More from Parent Category
- PP COMPRESSION FITTINGS
- PP BALL VALVE
- HOHEE VAYU FULL FACE HELMET
- Sintered Bushings
- MARATHON MAXXIMA
- MARATHON SUPER G
- Siemens Asynchronise AC Three Phase Non FLP IE2 Face Mounted Motor
- MISC(EMERGENCY MEDIC VEHICLE/AMBULANCE, DISINFECTION VEHICLES, SANITIZERS, DISINFECTANTS, TEMPERATURE MEASUREMENT AND DISINFECTANT CHANNELS FOR PERSONNEL, EQUIPMENT & VEHICLES, ISOLATION TENTS, CLUTCHES/CRANES, WHEELCHAIRS AND ROLLATORS)
- INDUSTRIAL WATER CLEANING DIVISION
- CROSS DOOR BOLT
- SUPREMOS RACING OIL 5W40 FULLY SYN SN/CJ4 (PAO ESTER) - 4L
- Cushion Covers
Related Products
- SS 4 PCS CANISTER SET ST
- SUPREMOS DIESEL 15W40 SN/CJ4 7L
- SUPREMOS 20W50 SYN BLEND SL/CF 4L
- SUPREMOS 10W40 SEMI SYN SN/CJ-4 (PAO) 4L
- OCTANE BOOSTER
- Petrol ULP95, E10, RON 95/97
- DINOIL 20W/50 TRUCK MULTIGRADE
- Ultra-Low Sulphur Diesel (EN590 10PPM 50PPM)
- Fuel Oil Mazut M100
- Kusoom Kitchen Gas Lighter
- Ford Coyote Gen-2 5.0 L V8 engine paired with the MT82 6-speed manual transmission
- 6.2L LT4 Supercharged V8 engine paired with 6-speed manual transmission complete Combo
- 6.2L hemi Supercharger V8 Engine with Harness and Computer
- 632ci High-Performance V8 Crate Engine Ready For Plug-And-Play
- 6L80 - 6L90 6-speed automatic transmission complete with torque converter
- 5.0 Coyote Mustang MT82 D4 6 speed manual transmission
- Ford 5.0L Coyote V8 engine paired with Tremec TR-6060 6-speed manual transmission
- Cadillac LT4 Supercharged 6.2L Engine & 10-Speed Automatic Transmission Combo Complete Drop-In Package
- AMG M177 4.0 V8 Twin Turbo-motor, compleet met accessoires, plug-and-play
- Gasoline ron 91
- Compressor 24liter KD24L
- Compressor 50liter KD50L
- ULTRA‐LOW SULPHUR DIESEL EN590
- New Parsun 60 HP EFI 4 Strok Outboard Motorwith Controls and Tank Complete
- Diesel En590 / 10PPM
- Diesel EN590 10 ppm
- Diesel D2 10ppm/ 50ppm
- Compressor 2A 12V 135MM Mounting
- PSA Industrial Oxygen Generator/System
- AVIATION KEROSENE JP54
- 2026 Argon 18 E-119 Tri+ SRAM Force AXS Classified Powershift Carbon Triathlon Bike (WORLDRACYCLES)
- 2026 Argon 18 Nitrogen Pro Shimano Dura-Ace Di2 Carbon Aero Road Bike (WORLDRACYCLES)
- 2026 Argon 18 Nitrogen Pro Shimano Ultegra Di2 Carbon Aero Road Bike (WORLDRACYCLES)
- 2026 Argon 18 Nitrogen Shimano 105 Di2 Carbon Aero Road Bike (WORLDRACYCLES)
- Range Rover 5.0-liter supercharged V8 Engine
- AMG M177 4.0-liter V8 twin-turbo engine
- COVNA DN20 DN25 1 2 3 Inch Brass Water Air Gas 24V 12V Solenoid Valve
- DN15 1/2 inch 2 Way 12VDC Brass Normally Close NC Solenoid Valve gas
- EN 590 10 ppm Diesel
Top Verified Suppliers
- Rozy enterprises · India
- Trading Networks LLC · United States
- COX VENTURES INTERNATIONAL · Malaysia
- Kusoom Manufacture and Exporter · India
- Rcshopers.com · United States
- PMR PETROLEUM TRADING FZ LLC · Germany
- Miradi Group Pty Ltd · South Africa
- Wasariah & Co Ltd. · United Kingdom
- Buds Auto Parts · United States
- Laraspa Trade GmbH · Germany
- OIL SERVICE DISTRIBUTION SASU · France
- Wisnu Engine · Indonesia
- CJSC CAPITAL OIL · Russian Federation
- zhejiang wellcare technology co.,ltd · China
- Pooja Meena · India
- 2015 · United States
- Geelip International Trading Company · United States
- Shandong Xuchen chemical technology Co,. Ltd. · China
- Asia Africa Global Alliance Pte Ltd · Singapore
- Shiny Silver Moon Trading LTD · Canada
- BSM Hungary Kft. · Hungary
- Shenghui Pump · China
- spectrum business solutions Ltd · Canada
- Renaissance Industrial Co., Ltd · China
- Baltyisk Terminals B.V · Netherlands
- BBQ SUPPLIES DEPOT · Indonesia
- Shiny One Operating company LLC · United States
- Beijing Peking University Pioneer Technology Corporation Ltd. · China
- Zhuhai Kuijie Environmentai Protection Techology Co.,Ltd · China
- Expo Global · Spain
Related Buy Leads
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›Agriculture›Apparel and fashion accessories›Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Car And Cylinder Filling Systems (Skid Systems)
The Car And Cylinder Filling Systems (Skid Systems) offered by Dogumak A.A are compact, pre‑assembled units designed for CNG and LPG refuelling at automobile service stations and industrial sites. Each skid incorporates a carbon steel housing, stainless steel 304/316 valves and alloy steel compressor components, providing a robust pressure‑tight enclosure. The modular design enables rapid deployment without on‑site welding or major civil work. This solution targets operators who need a ready‑to‑use refuelling station with minimal installation time.
In the fuel‑filling market, carbon steel housings are standard for structural strength, while stainless steel 304/316 valves are typical for corrosion resistance in high‑pressure gas environments. Typical operating pressure for CNG/LPG dispensing units is up to 250 bar, and flow capacities of 30 - 50 kg per hour are common for medium‑size stations. Most manufacturers design to ISO 16484‑5 for safety and control system integration, and equipment is usually rated for ambient temperatures between - 20 °C and 50 °C. These industry norms ensure compatibility with local regulations and reliable performance.
The skids are widely used by fleet operators, fuel distribution networks and remote service stations that require a self‑contained, scalable solution. Buyers generally arrange bulk purchase agreements and may request custom capacity or additional safety controls. Because the listing does not disclose minimum order quantities, exact pricing or lead times, interested importers should contact Dogumak A.A directly to confirm those commercial details.
| Housing Material | Carbon Steel |
| Valve Material | Stainless Steel 304/316 |
| Compressor Components | Alloy Steel |
| System Configuration | Skid‑mounted, pre‑assembled |
| Typical Operating Pressure | up to 250 bar (typical) |
| Typical Flow Capacity | 30 - 50 kg/h (typical) |
| Standard Safety Standard | ISO 16484‑5 (typical) |
| Typical Ambient Temperature Range | -20 °C to 50 °C (typical) |
| Typical Dimensions (L×W×H) | 2.5 m × 1.2 m × 1.8 m (typical) |
| Standard Packaging | Crated on pallet (typical) |
Dogumak A.A is located at 5.org. San. Bolgesi 83561 Nolu Cad. No:16 Baspinar Sehitkamil Gaziantep, Turkey. The company is listed with a harbor trust tier, indicating a degree of verification, although its response rate is currently recorded as 0.00 and average response time is not available.
The supplier specialises in manufacturing and supplying skid‑mounted fuel filling systems for CNG and LPG applications. While the listing provides detailed material information, it does not disclose production capacity, certifications or after‑sales service policies, so buyers should request those specifics directly from Dogumak A.A.
Skid-mounted car and cylinder filling systems are compact, pre-assembled units designed for CNG and LPG refueling operations at automobile service stations and industrial facilities. These systems integrate compressors, high-pressure valves, safety controls, and metering devices into a single modular package for rapid deployment. Widely used in fleet operations, fuel distribution networks, and remote fueling applications, these skids offer scalable capacity and easy integration with existing infrastructure for both domestic and export markets.
大家还在搜
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
Sourcing Car And Cylinder Filling Systems (Skid Systems) from Dogumak A.A - Turkey Import Guide
Before placing an order, verify the material grades, pressure ratings and any safety certifications that Dogumak A.A can provide. Request mill test reports for the carbon steel housing and stainless steel valves, and ask for the ISO 16484‑5 compliance certificate to ensure the system meets local regulatory requirements. Confirm that the skid dimensions fit your site layout and that any required customisations are clearly documented.
Logistics arrangements should be clarified early. Ask the supplier which Incoterms they support, typical lead‑time from order confirmation to shipment, and the preferred method of payment. Because the response rate is currently recorded as zero, you may need to allow extra time for correspondence and be prepared to negotiate payment security measures such as letters of credit.
Quality assurance is critical for high‑pressure fuel equipment. Arrange for a third‑party inspection at the factory or upon arrival, and request a full inspection report covering weld quality, valve functionality and pressure test results. Ensure that the shipment includes all relevant documentation, such as the CE marking file, test certificates and a user manual, before the goods are released for customs clearance.
Active buying requirements from importers looking for Similar products
- ✓谁在进口这款产品
- ✓他们的成交价格
- ✓他们使用的港口
Related Products & Suppliers
Compare alternatives, find similar products and connect with verified suppliers
Similar Products
Related Products
Trending in this Category
Top Suppliers for this Product
More from Parent Category
Browse Car And Cylinder Filling Systems (Skid Systems) — Top Products
39 listingsTop Verified Suppliers for Car And Cylinder Filling Systems (Skid Systems)
30 suppliersBuy Car And Cylinder Filling in Bulk — Verified Supplier in Turkey
When sourcing Car And Cylinder Filling Systems (Skid Systems) for your business, securing the right balance of quality and cost is essential. Dogumak A.A, a verified supplier based in Turkey, offers this product with key specifications including Industrial Grade CNG/LPG Skid System, Natural Gas (CNG) / Liquefied Petroleum Gas (LPG), and Modular skid 2000mm x 1500mm x 1800mm (customizable per capacity). By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $18,00085,000./Unit and manage bulk orders with a minimum order quantity (MOQ) of 1 Unit. This product is actively traded under HS Code 8414.40, making it a staple in the Automobile Gas Systems & Kits sector with strong demand from importing countries worldwide.
Car And Cylinder Filling Specifications, Trade Terms & Pricing
Importing Car And Cylinder Filling requires careful attention to shipping logistics, customs compliance, and secure payment terms. Dogumak A.A offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 8414.40 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading online B2B marketplace designed to make cross-border trade secure and efficient.
About Dogumak A.A — Supplier in Turkey
Finding trustworthy partners is the foundation of successful importing. The supplier of this Car And Cylinder Filling has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Automobile Gas Systems & Kits category and connect with top-tier exporters on our comprehensive B2B marketplace. Start your sourcing journey today.
Import Car And Cylinder Filling — Shipping, Logistics & Customs
Importing Car And Cylinder Filling requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 8414.40 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
Frequently Asked Questions About Car And Cylinder Filling
What is the wholesale price of Car And Cylinder Filling Systems (Skid Systems)?
The current listed wholesale price for Car And Cylinder Filling Systems (Skid Systems) from Dogumak A.A is $18,00085,000./Unit on FOB terms from Turkey. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Dogumak A.A through EximNext.
What is the Minimum Order Quantity (MOQ) for Car And Cylinder Filling?
The supplier, Dogumak A.A, has set a Minimum Order Quantity (MOQ) of 1 Unit for Car And Cylinder Filling. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
What is the HS Code for Car And Cylinder Filling Systems (Skid Systems)?
For international shipping and customs clearance, Car And Cylinder Filling Systems (Skid Systems) is classified under HS Code 8414.40. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
How can I import Car And Cylinder Filling from Turkey?
To import Car And Cylinder Filling from Turkey, negotiate shipping terms (FOB, CIF, or EXW) directly with Dogumak A.A. Ensure you have the necessary import licenses for Automobile Gas Systems & Kits products in your destination country.
Is Dogumak A.A a verified supplier?
Yes, Dogumak A.A is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
What are the key specifications of Car And Cylinder Filling Systems (Skid Systems)?
The key specifications for Car And Cylinder Filling Systems (Skid Systems) supplied by Dogumak A.A include Industrial Grade CNG/LPG Skid System, Natural Gas (CNG) / Liquefied Petroleum Gas (LPG), and Modular skid 2000mm x 1500mm x 1800mm (customizable per capacity). For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
What packaging options are available for bulk orders of Car And Cylinder Filling?
Dogumak A.A offers Car And Cylinder Filling with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Which countries import Car And Cylinder Filling the most?
Car And Cylinder Filling is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Dogumak A.A through our platform.
What certifications does this Car And Cylinder Filling supplier hold?
Dogumak A.A maintains international quality certifications. These ensure that the Car And Cylinder Filling meets international quality, safety, and regulatory standards required for cross-border trade.
How do I place a bulk order for Car And Cylinder Filling Systems (Skid Systems) on EximNext?
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Dogumak A.A will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
What payment methods are accepted?
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Dogumak A.A.
Explore More Automobile Gas Systems & Kits Products for Wholesale Import
Discover more products in Automobile Gas Systems & Kits from verified suppliers worldwide.