Import Brush Fabric — Buy in Bulk from Supplier in China

Hangzhou Sanke Textile Co., Ltd. supplies brushed textile fabric characterised by a raised fibre surface created by mechanical brushing, typically produced from polyester, acrylic, or polyester-cotton blended yarns. The brushing process uses cylindrical metal wire brushes or flexible nylon card clothing to lift fibres from the woven or knitted base, creating a pile depth that ranges from 1 mm to 4 mm depending on intended end use. Standard constructions include weft-knitted jersey or warp-knitted tricot bases, with fibre composition ratios such as 100 percent polyester, 80/20 polyester-cotton, or 100 percent acrylic for premium hand-feel. The fabric weight for apparel-grade brush fabric typically falls between 180 and 320 GSM, with upholstery weights reaching 400 to 600 GSM for dimensional stability under load.

The brushing operation is followed by shearing to uniform pile height and anti-pilling treatment where required by end-use specification. Colour fastness to rubbing typically achieves grade 3 to 4 on the grey scale for standard disperse dyes on polyester, with wet fastness generally one grade lower. Shrinkage rates vary with base construction: weft-knitted structures may exhibit 5 to 8 percent relaxation shrinkage in width unless heat-set, while warp-knitted or woven bases show lower dimensional change. Tear strength and tensile strength depend on base fabric construction and yarn linear density; typical warp tensile strength for 200 GSM polyester brush fabric is 400 to 600 Newtons per 50 mm strip. The brushed surface traps air, providing thermal resistance values (CLO) approximately 15 to 25 percent higher than equivalent unbrushed constructions.

Buyers span apparel brands seeking brushed fleece for loungewear and outerwear linings, automotive trim suppliers using flame-retardant treated grades for seat and headliner applications, and home textile converters producing brushed blankets and throws. The fabric accepts rotary and digital printing, though pile direction must be aligned for consistent colour yield. Importers should specify exact fibre content by percentage, pile height, and whether anti-pilling finish (typically polymeric resin or cellulase enzyme) is applied. Standard widths are 150 cm or 160 cm in tubular or open-width form. Minimum order quantities and exact lead times are not stated in the listing and must be confirmed directly with Hangzhou Sanke.

Hangzhou Sanke Textile Co., Ltd. is located in Guali Town, Xiaoshan District, Hangzhou 311241, in Zhejiang Province. The supplier is classified as imported tier with harbor trust tier. The response rate is recorded at 0.00 percent and average response hours at zero, indicating no response activity is captured. Xiaoshan District is a concentrated textile production zone within Hangzhou's industrial belt, with particular strength in weaving, knitting, and dyeing-finishing operations. The supplier address does not indicate whether facilities are owned or subcontracted, or whether in-house brushing and shearing equipment is operated.

The listing does not state year of establishment, registered capital, number of employees, annual turnover, or factory floor area. There is no disclosure of in-house testing capability, environmental compliance certification, or social audit status. The source description attributes ISO and SGS certification claims to the platform rather than to Hangzhou Sanke specifically, so buyers should request current certificate copies and scope statements. The company profile does not indicate design or sample development capacity, or whether the supplier works from buyer-supplied specifications versus catalogue offerings. Verification of actual production capability, quality management system implementation, and environmental permit status should be obtained directly.