Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›Pagooda Technology Co supplies surface-mount aluminum electrolytic capacitors in package sizes 0405, 0504, 0605, 0607, 0810 and 1010, with capacitance values from 0.1 uF to 470 uF and voltage ratings spanning 4 V to 400 V DC. The standard RVT series operates across -55 °C to +105 °C with a 2000-hour rated life at full voltage, and capacitance tolerance is given as ±20% at 120 Hz, 20 °C. The supplier holds stock of conventional specifications and offers customised capacitance values on request.
These capacitors use standard SMD construction with aluminium oxide dielectric and liquid electrolyte impregnated paper, typical for general-purpose aluminium electrolytic technology. The error grades offered are J (±5%), K (±1%) and M (±20%), though the ±1% figure is unusual for this chemistry and buyers should verify whether this refers to a special selection or a different product line. Standard industry lifetimes for 105 °C radial and SMD aluminium electrolytics range from 1000 to 5000 hours, so the 2000-hour rating sits in the mainstream commercial tier.
Primary applications include filtering, energising, coupling and starting circuits within power supplies, LED lighting drivers, automotive electronics, smart consumer devices, network communication hardware and industrial automation equipment. Buyers should confirm the exact endurance rating at their operating temperature, since lifetime halves for every 10 °C rise above the rated maximum. Pagooda Technology Co is located in Dongguan, Guangdong Province, but no response data or verification details are available in the listing, so direct contact is essential to establish lead times, minimum order quantities and sample availability.
| Package Size (SMD) | 0405, 0504, 0605, 0607, 0810, 1010 |
| Capacitance Range | 0.1 uF to 470 uF (stock); customised values available |
| Rated Voltage | 4 V DC to 400 V DC |
| Capacitance Tolerance | ±20% (standard); ±5% (J), ±1% (K), ±20% (M) selectable |
| Operating Temperature | -55 °C to +105 °C (standard industry range for aluminium electrolytics) |
| Rated Life | 2000 hours at +105 °C (typical for commercial-grade SMD aluminium electrolytic capacitors) |
| Test Conditions | 120 Hz, 20 °C |
| Dielectric System | Aluminium oxide on etched aluminium foil with liquid electrolyte (typical construction for aluminium electrolytic capacitors) |
| Intended Applications | Filtering, energising, coupling, starting in power supplies, lighting, automotive, communications, automation |
| Series Designation | RVT (Pagooda Technology Co standard series) |
Pagooda Technology Co is located at Huangjiang Chuangye 1st Road, Dongguan, Guangdong Province, China, with postal code 523445. The supplier is classified at the harbour trust tier, but the response rate is shown as 0.00% with zero average response hours recorded in the available data. No additional verification badges, years in operation, employee count, revenue figures or client references are stated in the listing.
The company offers both standard-stock and customised aluminium electrolytic SMD capacitors, positioning itself as a flexible source for buyers needing non-standard capacitance values. The product range focuses on the RVT series, a common industry designation for low-profile SMD aluminium electrolytics. Given the absence of response metrics, buyers should treat initial inquiries as exploratory and allow extra time for supplier engagement. No ISO certifications, factory audit results, or export licence details are provided in the source material.
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
Before placing an order with Pagooda Technology Co, buyers should verify the exact part number format, reel quantity per package size, and whether the supplier provides reliability data such as failure rate per billion component hours. Request sample capacitors for impedance analyser characterisation across temperature, and confirm that the capacitance-voltage combinations needed are held in Dongguan stock rather than requiring extended factory lead times. Given the zero response rate in the listing data, allow additional time for initial communication and consider using a sourcing agent in Guangdong if direct contact proves slow.
Logistics from Dongguan typically export via Shenzhen or Hong Kong ports. Buyers should confirm Incoterms, whether Pagooda Technology Co offers FOB Shenzhen, CIF destination port, or EXW factory terms, and who bears customs clearance costs. Payment methods, minimum order quantities for customised values, and sample charges are not stated and must be clarified. Standard practice for capacitor shipments from China involves anti-static reel packaging with moisture barrier bags and desiccant; verify whether vacuum-sealed packaging and humidity indicator cards are included, particularly for large orders stored before assembly.
On receipt, inspect reels for seal integrity and measure capacitance, ESR and leakage on a sampling basis using an LCR meter calibrated at 120 Hz and 100 kHz. Cross-check dimensions against the stated package sizes, as SMD aluminium electrolytic footprints vary subtly between manufacturers. Request a certificate of conformance or test report for each lot, specifying the acceptance criteria for capacitance drift, ESR stability and leakage current after life test. Retain samples for comparison if field failures occur, as aluminium electrolytic capacitor failure modes include electrolyte dry-out and vent rupture under reverse voltage or excessive ripple current.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing Aluminum Electrolytic Capacitors Smd Capacitors for your business, securing the right balance of quality and cost is essential. Pagooda Technology Co, a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $0.05/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Capacitors sector with strong demand from importing countries worldwide.
Importing Aluminum Electrolytic Cap requires careful attention to shipping logistics, customs compliance, and secure payment terms. Pagooda Technology Co offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading online B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Aluminum Electrolytic Cap has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Capacitors category and connect with top-tier exporters on our comprehensive B2B marketplace. Start your sourcing journey today.
Importing Aluminum Electrolytic Cap requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Aluminum Electrolytic Capacitors Smd Capacitors from Pagooda Technology Co is $0.05/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Pagooda Technology Co through EximNext.
The supplier, Pagooda Technology Co, has set a Minimum Order Quantity (MOQ) of 1 Bags for Aluminum Electrolytic Cap. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for Aluminum Electrolytic Capacitors Smd Capacitors depends on the specific grade and form. Contact Pagooda Technology Co through EximNext for the exact HS Code and customs documentation required for your destination country.
To import Aluminum Electrolytic Cap from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Pagooda Technology Co. Ensure you have the necessary import licenses for Capacitors products in your destination country.
Yes, Pagooda Technology Co is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Pagooda Technology Co through EximNext.
Pagooda Technology Co offers Aluminum Electrolytic Cap with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Aluminum Electrolytic Cap is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Pagooda Technology Co through our platform.
Pagooda Technology Co maintains international quality certifications. These ensure that the Aluminum Electrolytic Cap meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Pagooda Technology Co will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Pagooda Technology Co.
Discover more products in Capacitors from verified suppliers worldwide.