从China供应商批发进口25%Iacs Ccs Wire For Cables — FOB条款

Copper clad steel (CCS) wire at 25% IACS conductivity combines a steel core with a copper outer layer, giving tensile strength close to steel alongside sufficient electrical conductivity for signal and low-power applications. General Clad Co Ltd offers this wire in diameters from 0.06 mm to 6.54 mm, with temper options in hard drawn or annealed condition, and strength grades spanning low carbon, high strength, and extra high strength. The product conforms to ASTM B227, the standard specification for hard-drawn copper-clad steel wire, which governs dimensional tolerance, resistivity, and the adhesion of the copper cladding to the steel core.

The manufacturing process typically involves welding a copper strip around a steel rod, followed by drawing through dies to final diameter, with annealing applied where ductility is required. Hard drawn temper maximises tensile strength for aerial and tensioned installations, while annealed temper improves bendability and termination performance. The 25% IACS rating indicates moderate conductivity, sufficient for tracer wire, telephone drop wire, and shielding applications where full copper would be cost-prohibitive. Cladding thickness and uniformity directly affect both conductivity and corrosion resistance, making supplier process control critical to field performance over decades of service.

Primary buyers include cable manufacturers producing coaxial cable inner conductors, CATV drop cables, railway signalling cables, and automotive wire harnesses where mechanical robustness matters. Tracer wire applications in buried utility location also favour CCS for its strength and detectability. Importers should confirm spool sizes, packaging standards for sea freight, and whether General Clad Co Ltd provides mill test certificates with each lot showing conductivity verification and tensile test results. The supplier lists no response data, so direct enquiry is needed to establish lead times, minimum order quantities, and available Incoterms from their Shaoxing, Zhejiang facility.

General Clad Co Ltd operates from Keqiao, Shaoxing, in Zhejiang Province, China, with the postal address at 312000. The supplier holds a harbor trust tier within the marketplace, indicating a baseline verification level rather than advanced assurance. The response rate shows 0.00% and average response hours register as zero, which means no response history is available through the platform, so buyers must initiate direct contact to gauge communication reliability and quotation speed.

The company profile provides no stated year of establishment, employee count, revenue figures, factory size, or named clients, and these must not be invented. Their listed product is CCS wire for cable applications across telecommunications, transport, and consumer electronics sectors. The source description indicates capability across a wide diameter range and multiple strength/temper combinations, suggesting drawing and annealing equipment on site, though this should be confirmed during factory audit or video verification. Buyers are advised to request ISO 9001 or equivalent quality system documentation, as well as ASTM B227 test reports, before placing trial orders.