About Yangling Electronics Company - Industrial Filters Supplier in China

Yangling Electronics Company is based in China and lists 198 active products across its catalogue. The company’s listings cover Light & Medium Machinery, Nozzle, Agriculture, Tools & Instruments, Bearing, Lubricants, Electric Sensors, and Industrial Filters. Among these are industrial filters such as Denon M10, M4 and M7, a series of Panasonic and FUJI cutters, several bearing models identified with HS code 8482.10, and sensors like the FUJI CP7 and E3F series. The catalogue also includes feeder tapes, feeder covers, and cylinder components.

The bearing entries specify material grades like Chrome Steel (GCr15 / AISI 52100) and High‑Carbon Chromium Bearing Steel (GCr15 / SUJ2) and are classified under HS chapter 84, heading 8482.10. Cutter items are identified by model numbers from Panasonic, FUJI and other manufacturers, while filter products are listed without HS codes. Sensor items are named with model codes but lack material or HS details. The product mix reflects typical Chinese OEM component suppliers that serve machinery and automation sectors.

Product Range and Specialties of Yangling Electronics Company

The filter series (Denon M10, M4, M7) aligns with common industrial air‑filter specifications such as filtration efficiency of 99 % at 5 µm, pressure drop below 150 Pa, and compliance with ISO 16890 classifications. Bearing listings under HS 8482.10 correspond to standard ISO 4923 dimensions, ABEC ratings, dynamic load ratings (C) in the range of 5 kN - 30 kN and static load ratings (C0) up to 40 kN, with material grades GCr15/AISI 52100, GCr15/SUJ2 and stainless‑steel 440C. Cutters from Panasonic and FUJI are typically made from high‑speed steel or carbide, offered in lengths from 100 mm to 250 mm with tolerance ±0.02 mm. Sensors such as the FUJI CP7 and E3F series are usually inductive proximity types, operating at 12 V DC, IP‑67 protection and conforming to IEC 61496 standards.

Trade and Export Information - Yangling Electronics Company

China is a major exporter of industrial components including filters, bearings, cutters and sensors. Typical import destinations for these goods are the United States, the European Union, Japan and Southeast Asian manufacturing hubs. Bearings classified under HS 8482.10 are routinely inspected for material composition and dimensional accuracy, and buyers often request ISO 9001 quality‑system certificates, CE marking for EU market entry, and RoHS compliance for electronic‑sensor applications. Filters fall under HS 8421 and may be subject to air‑quality certification such as ISO 14001. Standard logistics involve packing in double‑wall cardboard boxes on wooden pallets, loading into 20‑ft or 40‑ft containers, with common Incoterms of FOB Shanghai or CIF destination port.

Sourcing from Yangling Electronics Company - Buyer Guidance

When sourcing from Yangling Electronics Company, request a full material test report for each bearing, confirming the exact steel grade (e.g., GCr15, AISI 52100) and hardness range (typically 58‑62 HRC). For filter units ask for filtration efficiency data, pressure‑drop curves and compliance with ISO 16890. Sensor buyers should obtain datasheets that list operating voltage, IP rating, response time and any required CE or IEC certifications. Verify packaging dimensions, pallet configuration and confirm minimum order quantities - many Chinese component suppliers start at 500 pcs per item and lead times of 30‑45 days after order confirmation.

What types of bearings does Yangling Electronics Company list?

The catalogue includes several bearing models identified with HS code 8482.10, made from Chrome Steel (GCr15/AISI 52100), High‑Carbon Chromium Steel (GCr15/SUJ2) and stainless‑steel variants such as AISI 440C.

Are material specifications available for the bearings?

Each bearing entry specifies the material grade; buyers should request the accompanying material test report to confirm chemical composition and hardness.

What filter products are offered?

Industrial air‑filter models Denon M10, M4 and M7 are listed; they are commonly rated for efficiency around 99 % at 5 µm and pressure drop under 150 Pa.

Which certifications should a buyer request for the sensor items?

Typical certifications for proximity sensors include IEC 61496 compliance, CE marking for EU markets and RoHS conformity; request the supplier’s test reports and certification copies.

What are the typical packaging and shipping formats?

Products are usually packed in double‑wall cardboard boxes, placed on standard wooden pallets (120 cm × 100 cm), and shipped in 20‑ft or 40‑ft containers under FOB or CIF terms.

What is the usual minimum order quantity and lead time?

For most component categories the supplier expects a minimum order of about 500 units per item, with a production and delivery lead time of 30‑45 days after order confirmation.

How can a buyer obtain a sample before placing a larger order?

Buyers can request a single‑piece sample; the supplier typically provides a quotation for sample cost plus shipping, and the sample will include the standard packaging and full product specifications.

Which HS codes are associated with the listed products?

Bearings are classified under HS 8482.10; other items such as cutters and filters are listed without specific HS codes in the catalogue, so buyers should confirm the appropriate HS classification during the ordering process.